[PATCH v3 00/10] Improvements to Tegra-based Chromebook support

From: Tomeu Vizoso <tomeu.vizoso@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
	Dylan Reid <dgreid@chromium.org>,
	Andrew Bresticker <abrestic@chromium.org>,
	Simon Glass <sjg@chromium.org>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	Alexandre Courbot <gnurou@gmail.com>,
	alsa-devel@alsa-project.org, David Airlie <airlied@linux.ie>,
	devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Jaroslav Kysela <perex@perex.cz>,
	Kumar Gala <galak@codeaurora.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-tegra@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@arm.linux.org.uk>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Takashi Iwai <tiwai@suse.de>,
	Thierry Reding <thierry.reding@gmail.com>,
	Wolfram Sang <wsa@the-dreams.de>
Subject: [PATCH v3 00/10] Improvements to Tegra-based Chromebook support
Date: Wed, 28 Jan 2015 11:50:58 +0100	[thread overview]
Message-ID: <1422442278-10405-1-git-send-email-tomeu.vizoso@collabora.com> (raw)

v3:	* Added bindings for the LTN140AT29 panel
	* Removed the delay in pwrseq, as what was actually needed was to add
	a dependency on the power supplies of the host
	* Uses the pinmux for the Blaze as generated by tegra-pinmux-scripts
	* Uses the pinmux for the Big as in the last patch from Simon Glass

Hello,

this series adds support for the Tegra-based HP Chromebook 14 (aka nyan
blaze), which is very similar to the Acer Chromebook 13 (aka nyan big).
Because they both include tegra124-nyan.dtsi, some improvements to Blaze
support have also benefitted the Big. I have tested that USB2, the panels,
HDMI, the trackpad, Wifi and sound work on both.

The DT for the Big includes the pinmux configuration as generated by
tegra-pinmux-scripts with Simon's patch at:

https://patchwork.ozlabs.org/patch/417779/

These patches are based on top of linux-next 20150128.

http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=nyan-v3

Regards,

Tomeu

Stéphane Marchesin (1):
  drm/panel: add support for Samsung LTN140AT29 panel

Tomeu Vizoso (9):
  ARM: tegra: Set the sound card model that alsaucm expects
  ARM: tegra: Move out nyan-generic parts out from the nyan-big DT
  ARM: tegra: Add DTS for the nyan-blaze board
  ARM: tegra: Add node for trackpad in Nyan boards
  ASoC: tegra: Add a control for the headphone switch
  ASoC: tegra: add sink for the internal mic to tegra_max98090
  ARM: tegra: Use pwrseq-simple for the wifi in Nyan
  ARM: tegra: Use the generated pinmux data
  ARM: tegra: Set spi-max-frequency property to flash node

 .../bindings/panel/samsung,ltn140at29-301.txt      |    7 +
 .../bindings/sound/nvidia,tegra-audio-max98090.txt |    1 +
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/tegra124-nyan-big.dts            | 2112 +++++++++++---------
 arch/arm/boot/dts/tegra124-nyan-blaze.dts          | 1325 ++++++++++++
 arch/arm/boot/dts/tegra124-nyan.dtsi               |  692 +++++++
 drivers/gpu/drm/panel/panel-simple.c               |   26 +
 sound/soc/tegra/tegra_max98090.c                   |    3 +
 8 files changed, 3206 insertions(+), 961 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt
 create mode 100644 arch/arm/boot/dts/tegra124-nyan-blaze.dts
 create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi

-- 
1.9.3