From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Lior Amsalem <alior@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
Marcin Wojtas <mw@semihalf.com>,
Simon Guinot <simon.guinot@sequanux.org>,
Russell King - ARM Linux <linux@arm.linux.org.uk>,
Willy Tarreau <w@1wt.eu>, Timor Kardashov <timork@marvell.com>,
Dmitri Epshtein <dima@marvell.com>,
Sebastian Careba <nitroshift@yahoo.com>
Subject: [PATCH v5 net-next 03/10] ARM: dts: armada-38x: enable buffer manager support on Armada 38x boards
Date: Thu, 10 Mar 2016 11:09:11 +0100 [thread overview]
Message-ID: <1457604558-1121-4-git-send-email-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <1457604558-1121-1-git-send-email-gregory.clement@free-electrons.com>
From: Marcin Wojtas <mw@semihalf.com>
Since mvneta driver supports using hardware buffer management (BM), in
order to use it, board files have to be adjusted accordingly. This commit
enables BM on:
* A385-DB-AP - each port has its own pool for long and common pool for
short packets,
* A388-ClearFog - same as above,
* A388-DB - to each port unique 'short' and 'long' pools are mapped,
* A388-GP - same as above.
Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
[gregory.clement@free-electrons.com: add suppport for the ClearFog board]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/boot/dts/armada-385-db-ap.dts | 20 +++++++++++++++++++-
arch/arm/boot/dts/armada-388-clearfog.dts | 6 ++++++
arch/arm/boot/dts/armada-388-db.dts | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-388-gp.dts | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 15 ++++++++++++++-
5 files changed, 71 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index acd5b1519edb..5f9451be21ff 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -61,7 +61,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi1: spi@10680 {
@@ -138,12 +139,18 @@
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
};
ethernet@34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
ethernet@70000 {
@@ -157,6 +164,13 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
+ };
+
+ bm@c8000 {
+ status = "okay";
};
nfc: flash@d0000 {
@@ -178,6 +192,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index c6e180eb3b11..c60206efb583 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -78,6 +78,9 @@
internal-regs {
ethernet@30000 {
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <1>;
status = "okay";
fixed-link {
@@ -88,6 +91,9 @@
ethernet@34000 {
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ bm,pool-short = <1>;
status = "okay";
fixed-link {
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index ff47af57f091..ea93ed727030 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -66,7 +66,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
@@ -99,6 +100,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
usb@58000 {
@@ -109,6 +113,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};
mdio@72004 {
@@ -129,6 +136,10 @@
status = "okay";
};
+ bm@c8000 {
+ status = "okay";
+ };
+
flash@d0000 {
status = "okay";
num-cs = <1>;
@@ -169,6 +180,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index cd316021d6ce..466b01eb1038 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -60,7 +60,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
@@ -133,6 +134,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
/* CON4 */
@@ -152,6 +156,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};
@@ -186,6 +193,10 @@
};
};
+ bm@c8000 {
+ status = "okay";
+ };
+
sata@e0000 {
pinctrl-names = "default";
pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -240,6 +251,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 3f792a563c05..8c9842237b60 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -58,7 +58,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
ethernet@70000 {
@@ -66,6 +67,9 @@
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
status = "okay";
};
@@ -110,6 +114,15 @@
pinctrl-names = "default";
status = "okay";
};
+
+ bm@c8000 {
+ status = "okay";
+ };
};
+
+ bm-bppi {
+ status = "okay";
+ };
+
};
};
--
2.5.0
next prev parent reply other threads:[~2016-03-10 10:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-10 10:09 [PATCH v5 net-next 00/10] API set for HW Buffer management Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 01/10] misc: sram: add optional ioremap without write combining Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 02/10] ARM: dts: armada-38x: add buffer manager nodes Gregory CLEMENT
2016-03-10 10:09 ` Gregory CLEMENT [this message]
2016-03-10 10:09 ` [PATCH v5 net-next 04/10] ARM: dts: armada-xp: " Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 05/10] ARM: dts: armada-xp: enable buffer manager support on Armada XP boards Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 06/10] ARM: dts: armada-xp-openblocks-ax3-4: Add BM support Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 07/10] bus: mvebu-mbus: provide api for obtaining IO and DRAM window information Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 08/10] net: mvneta: bm: add support for hardware buffer management Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 09/10] net: add a hardware buffer management helper API Gregory CLEMENT
2016-03-10 10:09 ` [PATCH v5 net-next 10/10] net: mvneta: Use the new hwbm framework Gregory CLEMENT
2016-03-14 2:02 ` [PATCH v5 net-next 00/10] API set for HW Buffer management David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457604558-1121-4-git-send-email-gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dima@marvell.com \
--cc=f.fainelli@gmail.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=nitroshift@yahoo.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=simon.guinot@sequanux.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=timork@marvell.com \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).