From: zengzhaoxiu@163.com
To: dwmw2@infradead.org, computersforpeace@gmail.com
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Subject: [PATCH v2 23/30] mtd: use parity16 in sm_ftl
Date: Wed, 6 Apr 2016 18:05:47 +0800 [thread overview]
Message-ID: <1459937147-8173-1-git-send-email-zengzhaoxiu@163.com> (raw)
In-Reply-To: <57031D9D.801@gmail.com>
From: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
---
drivers/mtd/sm_ftl.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index b096f8b..345ff1a 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -136,7 +136,7 @@ static int sm_get_lba(uint8_t *lba)
return -2;
/* check parity - endianness doesn't matter */
- if (hweight16(*(uint16_t *)lba) & 1)
+ if (parity16(*(uint16_t *)lba))
return -2;
return (lba[1] >> 1) | ((lba[0] & 0x07) << 7);
@@ -183,8 +183,7 @@ static void sm_write_lba(struct sm_oob *oob, uint16_t lba)
tmp[0] = 0x10 | ((lba >> 7) & 0x07);
tmp[1] = (lba << 1) & 0xFF;
- if (hweight16(*(uint16_t *)tmp) & 0x01)
- tmp[1] |= 1;
+ tmp[1] |= parity16(*(uint16_t *)tmp);
oob->lba_copy1[0] = oob->lba_copy2[0] = tmp[0];
oob->lba_copy1[1] = oob->lba_copy2[1] = tmp[1];
--
2.5.0
next prev parent reply other threads:[~2016-04-06 10:06 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 2:06 [PATCH V2 01/30] bitops: add parity functions Zeng Zhaoxiu
2016-04-05 4:23 ` [PATCH V2 02/30] Include generic parity.h in some architectures' bitops.h Zeng Zhaoxiu
2016-04-06 8:41 ` [PATCH v2 " zengzhaoxiu
2016-04-05 19:04 ` [PATCH V2 01/30] bitops: add parity functions Sam Ravnborg
2016-04-06 5:33 ` Zeng Zhaoxiu
2016-04-06 8:24 ` Sam Ravnborg
2016-04-06 8:22 ` [PATCH v2 " zengzhaoxiu
2016-04-06 8:46 ` [PATCH v2 03/30] Add alpha-specific " zengzhaoxiu
2016-04-06 8:53 ` [PATCH v2 04/30] Add blackfin-specific " zengzhaoxiu
2016-04-06 8:57 ` [PATCH v2 05/30] Add ia64-specific " zengzhaoxiu
2016-04-06 8:59 ` [PATCH v2 06/30] Add mips-specific " zengzhaoxiu
2016-04-06 10:23 ` zengzhaoxiu
2016-04-06 9:03 ` [PATCH v2 07/30] Add powerpc-specific " zengzhaoxiu
2016-04-06 9:07 ` [PATCH v2 08/30] Add sparc-specific " zengzhaoxiu
2016-04-06 18:44 ` Sam Ravnborg
2016-04-07 3:56 ` Zeng Zhaoxiu
2016-04-06 9:08 ` [PATCH v2 09/30] Add tile-specific " zengzhaoxiu
2016-04-06 13:27 ` Chris Metcalf
2016-04-07 3:55 ` Zeng Zhaoxiu
2016-04-06 9:14 ` [PATCH v2 10/30] Add x86-specific " zengzhaoxiu
2016-04-06 10:13 ` Borislav Petkov
2016-04-06 10:37 ` One Thousand Gnomes
2016-04-06 10:53 ` Borislav Petkov
2016-04-07 3:55 ` Zeng Zhaoxiu
2016-04-07 9:39 ` Borislav Petkov
2016-04-11 2:43 ` Zeng Zhaoxiu
2016-04-15 2:11 ` Borislav Petkov
2016-04-07 3:55 ` Zeng Zhaoxiu
2016-04-07 9:41 ` Borislav Petkov
2016-04-06 19:45 ` Andi Kleen
2016-04-07 3:56 ` Zeng Zhaoxiu
2016-04-07 6:31 ` Dmitry Vyukov
2016-04-07 9:43 ` Borislav Petkov
2016-05-04 18:46 ` [RFC PATCH] x86/hweight: Get rid of the special calling convention Borislav Petkov
2016-05-04 19:31 ` Brian Gerst
2016-05-04 19:33 ` H. Peter Anvin
2016-05-04 19:41 ` Borislav Petkov
2016-05-04 19:49 ` H. Peter Anvin
2016-05-04 20:22 ` Borislav Petkov
2016-05-04 20:51 ` H. Peter Anvin
2016-05-04 21:09 ` Andi Kleen
2016-05-05 13:02 ` Denys Vlasenko
2016-05-05 14:04 ` Borislav Petkov
2016-05-10 16:53 ` [PATCH -v2] " Borislav Petkov
2016-05-10 17:23 ` Peter Zijlstra
2016-05-10 19:02 ` Borislav Petkov
2016-05-10 19:03 ` H. Peter Anvin
2016-05-10 19:10 ` Borislav Petkov
2016-05-10 22:30 ` H. Peter Anvin
2016-05-11 4:11 ` Borislav Petkov
2016-05-11 11:15 ` Brian Gerst
2016-05-11 11:24 ` Peter Zijlstra
2016-05-11 12:47 ` Borislav Petkov
2016-05-12 4:54 ` H. Peter Anvin
2016-05-12 11:57 ` Borislav Petkov
2016-05-12 12:14 ` Peter Zijlstra
2016-05-12 13:09 ` Borislav Petkov
2016-05-18 10:38 ` Borislav Petkov
2016-04-07 14:10 ` [PATCH v2 10/30] Add x86-specific parity functions One Thousand Gnomes
2016-04-06 9:27 ` [PATCH v2 11/30] sunrpc: use parity8 zengzhaoxiu
2016-04-06 9:30 ` [PATCH v2 12/30] mips: use parity functions in cerr-sb1.c zengzhaoxiu
2016-04-06 9:36 ` [PATCH v2 13/30] bch: use parity32 zengzhaoxiu
2016-04-06 9:39 ` [PATCH v2 14/30] media: use parity8 in vivid-vbi-gen.c zengzhaoxiu
2016-04-06 9:41 ` [PATCH v2 15/30] media: use parity functions in saa7115 zengzhaoxiu
2016-04-06 9:43 ` [PATCH v2 16/30] input: use parity32 in grip_mp zengzhaoxiu
2016-04-06 9:44 ` [PATCH v2 17/30] input: use parity64 in sidewinder zengzhaoxiu
2016-04-06 9:45 ` [PATCH v2 18/30] input: use parity16 in ams_delta_serio zengzhaoxiu
2016-04-06 9:47 ` [PATCH v2 19/30] scsi: use parity32 in isci's phy zengzhaoxiu
2016-04-06 9:52 ` [PATCH v2 20/30] mtd: use parity16 in ssfdc zengzhaoxiu
2016-04-06 9:53 ` [PATCH v2 21/30] mtd: use parity functions in inftlcore zengzhaoxiu
2016-04-06 9:58 ` [PATCH v2 22/30] crypto: use parity functions in qat_hal zengzhaoxiu
2016-04-06 10:05 ` zengzhaoxiu [this message]
2016-04-06 10:11 ` [PATCH v2 24/30] ethernet: use parity8 in sun/niu.c zengzhaoxiu
2016-04-06 10:14 ` [PATCH v2 25/30] input: use parity8 in pcips2 zengzhaoxiu
2016-04-06 10:15 ` [PATCH v2 26/30] input: use parity8 in sa1111ps2 zengzhaoxiu
2016-04-06 10:16 ` [PATCH v2 27/30] iio: use parity32 in adxrs450 zengzhaoxiu
2016-04-10 14:37 ` Jonathan Cameron
2016-04-10 14:41 ` Lars-Peter Clausen
2016-04-10 15:13 ` Jonathan Cameron
2016-04-10 15:14 ` Jonathan Cameron
2016-04-06 10:18 ` [PATCH v2 28/30] serial: use parity32 in max3100 zengzhaoxiu
2016-04-06 10:25 ` Greg KH
2016-04-06 10:20 ` [PATCH v2 29/30] input: use parity8 in elantech zengzhaoxiu
2016-04-06 10:21 ` [PATCH v2 30/30] ethernet: use parity8 in broadcom/tg3.c zengzhaoxiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459937147-8173-1-git-send-email-zengzhaoxiu@163.com \
--to=zengzhaoxiu@163.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=zhaoxiu.zeng@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).