From: Serge Semin <fancer.lancer@gmail.com>
To: jdmason@kudzu.us, dave.jiang@intel.com, Allen.Hubbe@emc.com,
Xiangliang.Yu@amd.com
Cc: Sergey.Semin@t-platforms.ru, linux-ntb@googlegroups.com,
linux-kernel@vger.kernel.org,
Serge Semin <fancer.lancer@gmail.com>
Subject: [PATCH 21/22] NTB Perf: Alter driver to work with two-ports NTB API
Date: Tue, 29 Nov 2016 20:16:16 +0300 [thread overview]
Message-ID: <1480439777-1080-22-git-send-email-fancer.lancer@gmail.com> (raw)
In-Reply-To: <1480439777-1080-1-git-send-email-fancer.lancer@gmail.com>
The same as for PingPong driver, this driver can't be used with hardware
whithout Scratchpads. Additionally it supports two-ports and inbound MW
based devices only at the moment.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
drivers/ntb/test/ntb_perf.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index e75d4fd..99f1522 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -76,6 +76,7 @@
#define DMA_RETRIES 20
#define SZ_4G (1ULL << 32)
#define MAX_SEG_ORDER 20 /* no larger than 1M for kmalloc buffer */
+#define PIDX 0
MODULE_LICENSE(DRIVER_LICENSE);
MODULE_VERSION(DRIVER_VERSION);
@@ -452,7 +453,7 @@ static void perf_free_mw(struct perf_ctx *perf)
if (!mw->virt_addr)
return;
- ntb_mw_clear_trans(perf->ntb, 0);
+ ntb_mw_clear_trans(perf->ntb, PIDX, 0);
dma_free_coherent(&pdev->dev, mw->buf_size,
mw->virt_addr, mw->dma_addr);
mw->xlat_size = 0;
@@ -488,7 +489,7 @@ static int perf_set_mw(struct perf_ctx *perf, resource_size_t size)
mw->buf_size = 0;
}
- rc = ntb_mw_set_trans(perf->ntb, 0, mw->dma_addr, mw->xlat_size);
+ rc = ntb_mw_set_trans(perf->ntb, PIDX, 0, mw->dma_addr, mw->xlat_size);
if (rc) {
dev_err(&perf->ntb->dev, "Unable to set mw0 translation\n");
perf_free_mw(perf);
@@ -515,9 +516,9 @@ static void perf_link_work(struct work_struct *work)
if (max_mw_size && size > max_mw_size)
size = max_mw_size;
- ntb_peer_spad_write(ndev, MW_SZ_HIGH, upper_32_bits(size));
- ntb_peer_spad_write(ndev, MW_SZ_LOW, lower_32_bits(size));
- ntb_peer_spad_write(ndev, VERSION, PERF_VERSION);
+ ntb_peer_spad_write(ndev, PIDX, MW_SZ_HIGH, upper_32_bits(size));
+ ntb_peer_spad_write(ndev, PIDX, MW_SZ_LOW, lower_32_bits(size));
+ ntb_peer_spad_write(ndev, PIDX, VERSION, PERF_VERSION);
/* now read what peer wrote */
val = ntb_spad_read(ndev, VERSION);
@@ -559,8 +560,12 @@ static int perf_setup_mw(struct ntb_dev *ntb, struct perf_ctx *perf)
mw = &perf->mw;
- rc = ntb_mw_get_range(ntb, 0, &mw->phys_addr, &mw->phys_size,
- &mw->xlat_align, &mw->xlat_align_size);
+ rc = ntb_mw_get_align(ntb, PIDX, 0, &mw->xlat_align,
+ &mw->xlat_align_size, NULL);
+ if (rc)
+ return rc;
+
+ rc = ntb_peer_mw_get_addr(ntb, 0, &mw->phys_addr, &mw->phys_size);
if (rc)
return rc;
@@ -764,6 +769,14 @@ static int perf_probe(struct ntb_client *client, struct ntb_dev *ntb)
return -EIO;
}
+ if (!ntb->ops->mw_set_trans) {
+ dev_err(&ntb->dev, "Need inbound MW based NTB API\n");
+ return -EINVAL;
+ }
+
+ if (ntb_peer_port_count(ntb) != 1)
+ dev_warn(&ntb->dev, "Multi-port NTB devices unsupported\n");
+
node = dev_to_node(&pdev->dev);
perf = kzalloc_node(sizeof(*perf), GFP_KERNEL, node);
--
2.6.6
next prev parent reply other threads:[~2016-11-29 17:17 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 17:15 [PATCH 00/22] NTB: Alter kernel API to support multi-port devices Serge Semin
2016-11-29 17:15 ` [PATCH 01/22] NTB: Move link state API being first in sources Serge Semin
2016-11-29 17:15 ` [PATCH 02/22] NTB: Add peer indexed ports NTB API Serge Semin
2016-11-30 18:40 ` kbuild test robot
2016-11-30 19:12 ` kbuild test robot
2016-11-30 20:04 ` kbuild test robot
2016-11-29 17:15 ` [PATCH 03/22] NTB: Alter NTB API to support both inbound and outbound MW based interfaces Serge Semin
2016-11-30 18:54 ` kbuild test robot
2016-11-30 19:46 ` kbuild test robot
2016-11-29 17:15 ` [PATCH 04/22] NTB: Add messaging NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 05/22] NTB: Alter Scratchpads NTB API to support multi-ports interface Serge Semin
2016-11-29 17:16 ` [PATCH 06/22] NTB: Slightly alter link state NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 07/22] NTB: Fix a few ntb.h issues Serge Semin
2016-11-29 17:16 ` [PATCH 08/22] NTB: Add T-Platforms copyrights to NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 09/22] NTB Intel: Move link-related methods being first in the driver Serge Semin
2016-11-29 17:16 ` [PATCH 10/22] NTB Intel: Add port-related NTB API callback methods Serge Semin
2016-12-07 22:56 ` Allen Hubbe
2016-11-29 17:16 ` [PATCH 11/22] NTB Intel: Alter MW interface to fit new NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 12/22] NTB Intel: Alter Scratchpads " Serge Semin
2016-11-29 17:16 ` [PATCH 13/22] NTB Intel: Add T-Platforms copyrights to Intel NTB driver Serge Semin
2016-11-29 17:16 ` [PATCH 14/22] NTB AMD: Move link-related methods being first in the driver Serge Semin
2016-11-29 17:16 ` [PATCH 15/22] NTB AMD: Add port-related NTB API callback methods Serge Semin
2016-11-29 17:16 ` [PATCH 16/22] NTB AMD: Alter MW interface to fit new NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 17/22] NTB AMD: Alter Scratchpads " Serge Semin
2016-11-29 17:16 ` [PATCH 18/22] NTB AMD: Add T-Platforms copyrights to AMD NTB driver Serge Semin
2016-11-29 17:16 ` [PATCH 19/22] NTB PingPong: Alter driver to work with two-ports NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 20/22] NTB Tool: " Serge Semin
2016-11-29 17:16 ` Serge Semin [this message]
2016-11-29 17:16 ` [PATCH 22/22] NTB Transport: " Serge Semin
2016-12-12 21:08 ` [PATCH v2 0/9] NTB: Alter kernel API to support multi-port devices Serge Semin
2016-12-12 21:08 ` [PATCH v2 1/9] NTB: Make link-state API being declared first Serge Semin
2016-12-12 21:08 ` [PATCH v2 2/9] NTB: Add indexed ports NTB API Serge Semin
2016-12-12 21:08 ` [PATCH v2 3/9] NTB: Alter link-state API to support multi-port devices Serge Semin
2016-12-12 21:08 ` [PATCH v2 4/9] NTB: Alter MW API to support multi-ports devices Serge Semin
2016-12-12 21:08 ` [PATCH v2 5/9] NTB: Alter Scratchpads " Serge Semin
2016-12-12 21:08 ` [PATCH v2 6/9] NTB: Add Messaging NTB API Serge Semin
2016-12-12 21:08 ` [PATCH v2 7/9] NTB: Add new Memory Windows API documentation Serge Semin
2016-12-12 21:08 ` [PATCH v2 8/9] NTB: Add PCIe Gen4 link speed Serge Semin
2016-12-12 21:08 ` [PATCH v2 9/9] NTB: Add ntb.h comments Serge Semin
2016-12-13 23:49 ` [PATCH v3 0/9] NTB: Alter kernel API to support multi-port devices Serge Semin
2016-12-13 23:49 ` [PATCH v3 1/9] NTB: Make link-state API being declared first Serge Semin
2016-12-14 7:07 ` Allen Hubbe
2016-12-13 23:49 ` [PATCH v3 2/9] NTB: Add indexed ports NTB API Serge Semin
2016-12-14 7:07 ` Allen Hubbe
2016-12-13 23:49 ` [PATCH v3 3/9] NTB: Alter link-state API to support multi-port devices Serge Semin
2016-12-13 23:49 ` [PATCH v3 4/9] NTB: Alter MW API to support multi-ports devices Serge Semin
2016-12-14 7:08 ` Allen Hubbe
2017-01-11 0:11 ` Serge Semin
2016-12-13 23:49 ` [PATCH v3 5/9] NTB: Alter Scratchpads " Serge Semin
2016-12-14 7:08 ` Allen Hubbe
2017-01-11 0:13 ` Serge Semin
2017-02-01 20:01 ` Jon Mason
2016-12-13 23:49 ` [PATCH v3 6/9] NTB: Add Messaging NTB API Serge Semin
2016-12-20 9:48 ` Serge Semin
2016-12-13 23:49 ` [PATCH v3 7/9] NTB: Add new Memory Windows API documentation Serge Semin
2016-12-13 23:49 ` [PATCH v3 8/9] NTB: Add PCIe Gen4 link speed Serge Semin
2016-12-13 23:49 ` [PATCH v3 9/9] NTB: Add ntb.h comments Serge Semin
2016-12-14 7:09 ` Allen Hubbe
2016-12-14 7:16 ` Serge Semin
2016-12-14 7:19 ` Allen Hubbe
2016-12-20 9:50 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480439777-1080-22-git-send-email-fancer.lancer@gmail.com \
--to=fancer.lancer@gmail.com \
--cc=Allen.Hubbe@emc.com \
--cc=Sergey.Semin@t-platforms.ru \
--cc=Xiangliang.Yu@amd.com \
--cc=dave.jiang@intel.com \
--cc=jdmason@kudzu.us \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-ntb@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).