From: "Manuel Schölling" <manuel.schoelling@gmx.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: gregkh@linuxfoundation.org, jslaby@suse.com, kilobyte@angband.pl,
lkml14@scotdoyle.com, rdunlap@infradead.org, shorne@gmail.com,
andrey_utkin@fastmail.com, akpm@linux-foundation.org,
paul.burton@imgtec.com, daniel.vetter@ffwll.ch, tj@kernel.org,
hdegoede@redhat.com, linux-kernel@vger.kernel.org,
linux-fbdev@vger.kernel.org
Subject: Re: [PATCH v8 3/3] console: Add persistent scrollback buffers for all VGA consoles
Date: Tue, 10 Jan 2017 18:31:57 +0100 [thread overview]
Message-ID: <1484069517.1301.4.camel@gmx.de> (raw)
In-Reply-To: <4640722.jsFVORW8WM@amdc3058>
Hi Bartlomiej,
First of all thank you for you feedback!
On Tue, 2017-01-10 at 17:44 +0100, Bartlomiej Zolnierkiewicz wrote:
> On Tuesday, January 10, 2017 05:22:22 PM Bartlomiej Zolnierkiewicz
> wrote:
> >
> > Hi,
> >
> > The patchset generally looks fine to me but I have a question
> > regarding new VGACON_SOFT_SCROLLBACK_PERSISTENT config option.
> >
> > Since the code size impact to support the persistent scrollback
> > feature is minimal wouldn't it be better to always include it?
> >
> > The feature would be disabled by default and could be enabled
> > by using the new kernel command line parameter (you may also add
> > a new config option for enabling it by default if desired).
>
> Something like:
>
> #ifdef VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT
> static bool scrollback_persistent = 1;
> #else
> static bool scrollback_persistent;
> #endif
>
> module_param_named(scrollback_persistent, scrollback_persistent,
> bool, 0);
> MODULE_PARM_DESC(scrollback_persistent, "Enable persistent scrollback
> feature");
>
> and then use scrollback_persistent variable in
> vgacon_scrollback_switch()
> to control the actual behavior instead of ifdefs.
Sounds pretty good to me. You are right: The code size impact is rather
small. I will apply your suggestions and send you another patch as soon
as I find the time to implement it (should be any time this week).
Thanks again!
Manuel
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
> > Best regards,
> > --
> > Bartlomiej Zolnierkiewicz
> > Samsung R&D Institute Poland
> > Samsung Electronics
> >
> > On Thursday, January 05, 2017 12:33:20 PM Manuel Schölling wrote:
> > > Add a scrollback buffers for each VGA console. The benefit is
> > > that
> > > the scrollback history is not flushed when switching between
> > > consoles
> > > but is persistent.
> > > The buffers are allocated on demand when a new console is opened.
> > >
> > > This breaks tools like clear_console that rely on flushing the
> > > scrollback history by switching back and forth between consoles
> > > which is why this feature is disabled by default.
> > > Use the escape sequence \e[3J instead for flushing the buffer.
> > >
> > > Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
> > > Reviewed-by: Andrey Utkin <andrey_utkin@fastmail.com>
> > > Tested-by: Andrey Utkin <andrey_utkin@fastmail.com>
> > > Tested-by: Adam Borowski <kilobyte@angband.pl>
> > > ---
> > > drivers/video/console/Kconfig | 25 +++++++-
> > > drivers/video/console/vgacon.c | 142 ++++++++++++++++++++++++++-
> > > --------------
> > > 2 files changed, 111 insertions(+), 56 deletions(-)
> > >
> > > diff --git a/drivers/video/console/Kconfig
> > > b/drivers/video/console/Kconfig
> > > index c3f1fb9ee820..f500e58f7636 100644
> > > --- a/drivers/video/console/Kconfig
> > > +++ b/drivers/video/console/Kconfig
> > > @@ -43,9 +43,28 @@ config VGACON_SOFT_SCROLLBACK_SIZE
> > > range 1 1024
> > > default "64"
> > > help
> > > - Enter the amount of System RAM to allocate for the
> > > scrollback
> > > - buffer. Each 64KB will give you approximately 16 80x25
> > > - screenfuls of scrollback buffer
> > > + Enter the amount of System RAM to allocate for
> > > scrollback
> > > + buffers of VGA consoles. Each 64KB will give you
> > > approximately
> > > + 16 80x25 screenfuls of scrollback buffer.
> > > +
> > > +config VGACON_SOFT_SCROLLBACK_PERSISTENT
> > > + bool "Persistent Scrollback History for each console"
> > > + depends on VGACON_SOFT_SCROLLBACK
> > > + default n
> > > + help
> > > + Say Y here if the scrollback history should persist
> > > when switching
> > > + between consoles. Otherwise, the scrollback history
> > > will be flushed
> > > + each time the console is switched.
> > > +
> > > + This feature might break your tool of choice to flush
> > > the scrollback
> > > + buffer, e.g. clear(1) will work fine but Debian's
> > > clear_console(1)
> > > + will be broken, which might cause security issues.
> > > + You can use the escape sequence \e[3J instead if this
> > > feature is
> > > + activated.
> > > +
> > > + Note that a buffer of VGACON_SOFT_SCROLLBACK_SIZE is
> > > taken for each
> > > + created tty device.
> > > + So if you use a RAM-constrained system, say N here.
> > >
> > > config MDA_CONSOLE
> > > depends on !M68K && !PARISC && ISA
> > > diff --git a/drivers/video/console/vgacon.c
> > > b/drivers/video/console/vgacon.c
> > > index 9a7c2bbc5326..ca23d222e029 100644
> > > --- a/drivers/video/console/vgacon.c
> > > +++ b/drivers/video/console/vgacon.c
> > > @@ -162,7 +162,7 @@ static inline void vga_set_mem_top(struct
> > > vc_data *c)
> > >
> > > #ifdef CONFIG_VGACON_SOFT_SCROLLBACK
> > > /* software scrollback */
> > > -static struct vgacon_scrollback_info {
> > > +struct vgacon_scrollback_info {
> > > void *data;
> > > int tail;
> > > int size;
> > > @@ -171,74 +171,110 @@ static struct vgacon_scrollback_info {
> > > int cur;
> > > int save;
> > > int restore;
> > > -} vgacon_scrollback;
> > > +};
> > > +
> > > +static struct vgacon_scrollback_info *vgacon_scrollback_cur;
> > > +#ifdef CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT
> > > +static struct vgacon_scrollback_info
> > > vgacon_scrollbacks[MAX_NR_CONSOLES];
> > > +#else
> > > +static struct vgacon_scrollback_info vgacon_scrollbacks[1];
> > > +#endif
> > >
> > > -static void vgacon_scrollback_reset(size_t reset_size)
> > > +static void vgacon_scrollback_reset(int vc_num, size_t
> > > reset_size)
> > > {
> > > - if (vgacon_scrollback.data && reset_size > 0)
> > > - memset(vgacon_scrollback.data, 0, reset_size);
> > > + struct vgacon_scrollback_info *scrollback =
> > > &vgacon_scrollbacks[vc_num];
> > > +
> > > + if (scrollback->data && reset_size > 0)
> > > + memset(scrollback->data, 0, reset_size);
> > >
> > > - vgacon_scrollback.cnt = 0;
> > > - vgacon_scrollback.tail = 0;
> > > - vgacon_scrollback.cur = 0;
> > > + scrollback->cnt = 0;
> > > + scrollback->tail = 0;
> > > + scrollback->cur = 0;
> > > }
> > >
> > > -static void vgacon_scrollback_init(int pitch)
> > > +static void vgacon_scrollback_init(int vc_num)
> > > {
> > > - int rows = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE *
> > > 1024/pitch;
> > > -
> > > - if (vgacon_scrollback.data) {
> > > - vgacon_scrollback.cnt = 0;
> > > - vgacon_scrollback.tail = 0;
> > > - vgacon_scrollback.cur = 0;
> > > - vgacon_scrollback.rows = rows - 1;
> > > - vgacon_scrollback.size = rows * pitch;
> > > + int pitch = vga_video_num_columns * 2;
> > > + size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024;
> > > + int rows = size / pitch;
> > > + void *data;
> > > +
> > > + data = kmalloc_array(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE,
> > > 1024,
> > > + GFP_NOWAIT);
> > > +
> > > + vgacon_scrollbacks[vc_num].data = data;
> > > + vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num];
> > > +
> > > + vgacon_scrollback_cur->rows = rows - 1;
> > > + vgacon_scrollback_cur->size = rows * pitch;
> > > +
> > > + vgacon_scrollback_reset(vc_num, size);
> > > +}
> > > +
> > > +static void vgacon_scrollback_switch(int vc_num)
> > > +{
> > > +#ifndef CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT
> > > + vc_num = 0;
> > > +#endif
> > > +
> > > + if (!vgacon_scrollbacks[vc_num].data) {
> > > + vgacon_scrollback_init(vc_num);
> > > + } else {
> > > +#ifdef CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT
> > > + vgacon_scrollback_cur =
> > > &vgacon_scrollbacks[vc_num];
> > > +#else
> > > + size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE
> > > * 1024;
> > > +
> > > + vgacon_scrollback_reset(vc_num, size);
> > > +#endif
> > > }
> > > }
> > >
> > > static void vgacon_scrollback_startup(void)
> > > {
> > > - vgacon_scrollback.data =
> > > kcalloc(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE,
> > > - 1024, GFP_NOWAIT);
> > > - vgacon_scrollback_init(vga_video_num_columns * 2);
> > > + vgacon_scrollback_cur = &vgacon_scrollbacks[0];
> > > + vgacon_scrollback_init(0);
> > > }
> > >
> > > static void vgacon_scrollback_update(struct vc_data *c, int t,
> > > int count)
> > > {
> > > void *p;
> > >
> > > - if (!vgacon_scrollback.size || c->vc_num != fg_console)
> > > + if (!vgacon_scrollback_cur->data ||
> > > !vgacon_scrollback_cur->size ||
> > > + c->vc_num != fg_console)
> > > return;
> > >
> > > p = (void *) (c->vc_origin + t * c->vc_size_row);
> > >
> > > while (count--) {
> > > - scr_memcpyw(vgacon_scrollback.data +
> > > vgacon_scrollback.tail,
> > > + scr_memcpyw(vgacon_scrollback_cur->data +
> > > + vgacon_scrollback_cur->tail,
> > > p, c->vc_size_row);
> > > - vgacon_scrollback.cnt++;
> > > +
> > > + vgacon_scrollback_cur->cnt++;
> > > p += c->vc_size_row;
> > > - vgacon_scrollback.tail += c->vc_size_row;
> > > + vgacon_scrollback_cur->tail += c->vc_size_row;
> > >
> > > - if (vgacon_scrollback.tail >=
> > > vgacon_scrollback.size)
> > > - vgacon_scrollback.tail = 0;
> > > + if (vgacon_scrollback_cur->tail >=
> > > vgacon_scrollback_cur->size)
> > > + vgacon_scrollback_cur->tail = 0;
> > >
> > > - if (vgacon_scrollback.cnt >
> > > vgacon_scrollback.rows)
> > > - vgacon_scrollback.cnt =
> > > vgacon_scrollback.rows;
> > > + if (vgacon_scrollback_cur->cnt >
> > > vgacon_scrollback_cur->rows)
> > > + vgacon_scrollback_cur->cnt =
> > > vgacon_scrollback_cur->rows;
> > >
> > > - vgacon_scrollback.cur = vgacon_scrollback.cnt;
> > > + vgacon_scrollback_cur->cur =
> > > vgacon_scrollback_cur->cnt;
> > > }
> > > }
> > >
> > > static void vgacon_restore_screen(struct vc_data *c)
> > > {
> > > - vgacon_scrollback.save = 0;
> > > + vgacon_scrollback_cur->save = 0;
> > >
> > > - if (!vga_is_gfx && !vgacon_scrollback.restore) {
> > > + if (!vga_is_gfx && !vgacon_scrollback_cur->restore) {
> > > scr_memcpyw((u16 *) c->vc_origin, (u16 *) c-
> > > >vc_screenbuf,
> > > c->vc_screenbuf_size > vga_vram_size
> > > ?
> > > vga_vram_size : c-
> > > >vc_screenbuf_size);
> > > - vgacon_scrollback.restore = 1;
> > > - vgacon_scrollback.cur = vgacon_scrollback.cnt;
> > > + vgacon_scrollback_cur->restore = 1;
> > > + vgacon_scrollback_cur->cur =
> > > vgacon_scrollback_cur->cnt;
> > > }
> > > }
> > >
> > > @@ -252,41 +288,41 @@ static void vgacon_scrolldelta(struct
> > > vc_data *c, int lines)
> > > return;
> > > }
> > >
> > > - if (!vgacon_scrollback.data)
> > > + if (!vgacon_scrollback_cur->data)
> > > return;
> > >
> > > - if (!vgacon_scrollback.save) {
> > > + if (!vgacon_scrollback_cur->save) {
> > > vgacon_cursor(c, CM_ERASE);
> > > vgacon_save_screen(c);
> > > - vgacon_scrollback.save = 1;
> > > + vgacon_scrollback_cur->save = 1;
> > > }
> > >
> > > - vgacon_scrollback.restore = 0;
> > > - start = vgacon_scrollback.cur + lines;
> > > + vgacon_scrollback_cur->restore = 0;
> > > + start = vgacon_scrollback_cur->cur + lines;
> > > end = start + abs(lines);
> > >
> > > if (start < 0)
> > > start = 0;
> > >
> > > - if (start > vgacon_scrollback.cnt)
> > > - start = vgacon_scrollback.cnt;
> > > + if (start > vgacon_scrollback_cur->cnt)
> > > + start = vgacon_scrollback_cur->cnt;
> > >
> > > if (end < 0)
> > > end = 0;
> > >
> > > - if (end > vgacon_scrollback.cnt)
> > > - end = vgacon_scrollback.cnt;
> > > + if (end > vgacon_scrollback_cur->cnt)
> > > + end = vgacon_scrollback_cur->cnt;
> > >
> > > - vgacon_scrollback.cur = start;
> > > + vgacon_scrollback_cur->cur = start;
> > > count = end - start;
> > > - soff = vgacon_scrollback.tail - ((vgacon_scrollback.cnt
> > > - end) *
> > > - c->vc_size_row);
> > > + soff = vgacon_scrollback_cur->tail -
> > > + ((vgacon_scrollback_cur->cnt - end) * c-
> > > >vc_size_row);
> > > soff -= count * c->vc_size_row;
> > >
> > > if (soff < 0)
> > > - soff += vgacon_scrollback.size;
> > > + soff += vgacon_scrollback_cur->size;
> > >
> > > - count = vgacon_scrollback.cnt - start;
> > > + count = vgacon_scrollback_cur->cnt - start;
> > >
> > > if (count > c->vc_rows)
> > > count = c->vc_rows;
> > > @@ -300,13 +336,13 @@ static void vgacon_scrolldelta(struct
> > > vc_data *c, int lines)
> > >
> > > count *= c->vc_size_row;
> > > /* how much memory to end of buffer left? */
> > > - copysize = min(count, vgacon_scrollback.size -
> > > soff);
> > > - scr_memcpyw(d, vgacon_scrollback.data + soff,
> > > copysize);
> > > + copysize = min(count, vgacon_scrollback_cur-
> > > >size - soff);
> > > + scr_memcpyw(d, vgacon_scrollback_cur->data +
> > > soff, copysize);
> > > d += copysize;
> > > count -= copysize;
> > >
> > > if (count) {
> > > - scr_memcpyw(d, vgacon_scrollback.data,
> > > count);
> > > + scr_memcpyw(d, vgacon_scrollback_cur-
> > > >data, count);
> > > d += count;
> > > }
> > >
> > > @@ -320,13 +356,13 @@ static void vgacon_flush_scrollback(struct
> > > vc_data *c)
> > > {
> > > size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024;
> > >
> > > - if (c->vc_num == fg_console)
> > > - vgacon_scrollback_reset(size);
> > > + vgacon_scrollback_reset(c->vc_num, size);
> > > }
> > > #else
> > > #define vgacon_scrollback_startup(...) do { } while (0)
> > > #define vgacon_scrollback_init(...) do { } while (0)
> > > #define vgacon_scrollback_update(...) do { } while (0)
> > > +#define vgacon_scrollback_switch(...) do { } while (0)
> > >
> > > static void vgacon_restore_screen(struct vc_data *c)
> > > {
> > > @@ -805,7 +841,7 @@ static int vgacon_switch(struct vc_data *c)
> > > vgacon_doresize(c, c->vc_cols, c-
> > > >vc_rows);
> > > }
> > >
> > > - vgacon_scrollback_init(c->vc_size_row);
> > > + vgacon_scrollback_switch(c->vc_num);
> > > return 0; /* Redrawing not needed */
> > > }
>
>
next prev parent reply other threads:[~2017-01-10 17:33 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-04 10:53 [PATCH v7 0/3] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2016-12-04 10:53 ` [PATCH v7 1/3] console: Move scrollback data into its own struct Manuel Schölling
2016-12-04 10:53 ` [PATCH v7 2/3] console: Add callback to flush scrollback buffer to consw struct Manuel Schölling
2016-12-04 10:53 ` [PATCH v7 3/3] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2016-12-06 10:02 ` [PATCH v7 0/3] " Greg KH
2016-12-06 16:32 ` Manuel Schölling
2016-12-21 16:37 ` [PATCH RESEND " Manuel Schölling
2016-12-21 16:37 ` [PATCH RESEND v7 1/3] console: Move scrollback data into its own struct Manuel Schölling
2016-12-21 16:37 ` [PATCH RESEND v7 2/3] console: Add callback to flush scrollback buffer to consw struct Manuel Schölling
2016-12-21 16:37 ` [PATCH RESEND v7 3/3] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2017-01-04 13:54 ` [PATCH RESEND v7 0/3] " Andrey Utkin
2017-01-05 11:33 ` [PATCH v8 " Manuel Schölling
2017-01-05 11:33 ` [PATCH v8 1/3] console: Move scrollback data into its own struct Manuel Schölling
2017-01-05 11:33 ` [PATCH v8 2/3] console: Add callback to flush scrollback buffer to consw struct Manuel Schölling
2017-01-05 11:33 ` [PATCH v8 3/3] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
[not found] ` <CGME20170110162224epcas1p2095912fa6b73a1457fa86396149e78e9@epcas1p2.samsung.com>
2017-01-10 16:22 ` Bartlomiej Zolnierkiewicz
[not found] ` <CGME20170110164435epcas1p314efb9c6ea3ffb971fce06f3bfaec736@epcas1p3.samsung.com>
2017-01-10 16:44 ` Bartlomiej Zolnierkiewicz
2017-01-10 17:31 ` Manuel Schölling [this message]
2017-01-10 21:28 ` [PATCH v9 0/4] " Manuel Schölling
2017-01-10 21:28 ` [PATCH v9 1/4] console: Move scrollback data into its own struct Manuel Schölling
2017-01-10 21:28 ` [PATCH v9 2/4] console: Add callback to flush scrollback buffer to consw struct Manuel Schölling
2017-01-10 21:28 ` [PATCH v9 3/4] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2017-01-10 21:28 ` [PATCH v9 4/4] console: Make persistent scrollback a boot parameter Manuel Schölling
2017-01-10 22:58 ` Adam Borowski
2017-01-11 21:41 ` Manuel Schölling
2017-01-13 20:00 ` Manuel Schölling
2017-01-14 7:26 ` Greg KH
2017-01-11 13:32 ` kbuild test robot
2017-01-13 20:07 ` [PATCH v10 0/4] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2017-01-25 10:55 ` Greg KH
2017-01-13 20:07 ` [PATCH v10 1/4] console: Move scrollback data into its own struct Manuel Schölling
2017-01-13 20:07 ` [PATCH v10 2/4] console: Add callback to flush scrollback buffer to consw struct Manuel Schölling
2017-01-13 20:07 ` [PATCH v10 3/4] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2017-01-19 13:23 ` Greg KH
2017-01-19 16:12 ` Manuel Schölling
2017-01-19 16:33 ` Greg KH
2017-01-19 23:04 ` Adam Borowski
2017-01-20 13:16 ` Adam Borowski
2017-01-20 13:31 ` Greg KH
2017-01-20 14:27 ` Adam Borowski
2017-01-19 17:20 ` Adam Borowski
2017-01-13 20:07 ` [PATCH v10 4/4] console: Make persistent scrollback a boot parameter Manuel Schölling
2017-02-02 20:07 ` [PATCH v9 " Paul Gortmaker
2017-02-03 16:04 ` Manuel Schölling
2017-02-03 16:45 ` Adam Borowski
2017-01-02 14:27 ` [PATCH RESEND v7 0/3] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
2017-01-02 14:27 ` [PATCH RESEND v7 1/3] console: Move scrollback data into its own struct Manuel Schölling
2017-01-02 14:27 ` [PATCH RESEND v7 2/3] console: Add callback to flush scrollback buffer to consw struct Manuel Schölling
2017-01-02 14:27 ` [PATCH RESEND v7 3/3] console: Add persistent scrollback buffers for all VGA consoles Manuel Schölling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484069517.1301.4.camel@gmx.de \
--to=manuel.schoelling@gmx.de \
--cc=akpm@linux-foundation.org \
--cc=andrey_utkin@fastmail.com \
--cc=b.zolnierkie@samsung.com \
--cc=daniel.vetter@ffwll.ch \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=jslaby@suse.com \
--cc=kilobyte@angband.pl \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml14@scotdoyle.com \
--cc=paul.burton@imgtec.com \
--cc=rdunlap@infradead.org \
--cc=shorne@gmail.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).