From: Connor McAdams <conmanx360@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: conmanx360@gmail.com, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Takashi Sakamoto <o-takashi@sakamocchi.jp>,
Alastair Bridgewater <alastair.bridgewater@gmail.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: [PATCH 13/15] ALSA: hda/ca0132 - Add input selection commands for AE-5
Date: Tue, 18 Sep 2018 14:33:41 -0400 [thread overview]
Message-ID: <1537295625-8082-14-git-send-email-conmanx360@gmail.com> (raw)
In-Reply-To: <1537295625-8082-1-git-send-email-conmanx360@gmail.com>
This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 35 +++++++++++++++++++++++++++++------
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 364c3fe..ff80832 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4523,6 +4523,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
tmp = FLOAT_ONE;
break;
+ case QUIRK_AE5:
+ ca0113_mmio_command_set(codec, 0x48, 0x28, 0x00);
+ tmp = FLOAT_THREE;
+ break;
default:
tmp = FLOAT_ONE;
break;
@@ -4537,10 +4541,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
chipio_set_stream_control(codec, 0x03, 1);
chipio_set_stream_control(codec, 0x04, 1);
-
- if (spec->quirk == QUIRK_SBZ) {
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
chipio_write(codec, 0x18B098, 0x0000000C);
chipio_write(codec, 0x18B09C, 0x0000000C);
+ break;
+ case QUIRK_AE5:
+ chipio_write(codec, 0x18B098, 0x0000000C);
+ chipio_write(codec, 0x18B09C, 0x0000004C);
+ break;
}
ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val);
break;
@@ -4554,6 +4563,9 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
case QUIRK_R3DI:
r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
break;
+ case QUIRK_AE5:
+ ca0113_mmio_command_set(codec, 0x48, 0x28, 0x00);
+ break;
}
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
@@ -4564,11 +4576,13 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
tmp = FLOAT_ZERO;
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
- if (spec->quirk == QUIRK_SBZ) {
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ case QUIRK_AE5:
chipio_write(codec, 0x18B098, 0x00000000);
chipio_write(codec, 0x18B09C, 0x00000000);
+ break;
}
-
chipio_set_stream_control(codec, 0x03, 1);
chipio_set_stream_control(codec, 0x04, 1);
break;
@@ -4584,6 +4598,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
r3di_gpio_mic_set(codec, R3DI_FRONT_MIC);
tmp = FLOAT_ONE;
break;
+ case QUIRK_AE5:
+ ca0113_mmio_command_set(codec, 0x48, 0x28, 0x3f);
+ tmp = FLOAT_THREE;
+ break;
default:
tmp = FLOAT_ONE;
break;
@@ -4599,9 +4617,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
chipio_set_stream_control(codec, 0x03, 1);
chipio_set_stream_control(codec, 0x04, 1);
- if (spec->quirk == QUIRK_SBZ) {
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
chipio_write(codec, 0x18B098, 0x0000000C);
chipio_write(codec, 0x18B09C, 0x000000CC);
+ break;
+ case QUIRK_AE5:
+ chipio_write(codec, 0x18B098, 0x0000000C);
+ chipio_write(codec, 0x18B09C, 0x0000004C);
+ break;
}
ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val);
break;
@@ -4610,7 +4634,6 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
snd_hda_power_down_pm(codec);
return 0;
-
}
/*
--
2.7.4
next prev parent reply other threads:[~2018-09-18 18:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 18:33 [PATCH 00/15] Add support for Sound BlasterX AE-5 Connor McAdams
2018-09-18 18:33 ` [PATCH 01/15] ALSA: hda/ca0132 - Define new verbs and control params Connor McAdams
2018-09-18 18:33 ` [PATCH 02/15] ALSA: hda/ca0132 - Add quirk for Sound BlasterX AE-5 Connor McAdams
2018-09-18 18:33 ` [PATCH 03/15] ALSA: hda/ca0132 - Add pincfg for AE-5 Connor McAdams
2018-09-18 18:33 ` [PATCH 04/15] ALSA: hda/ca0132 - Set AE-5 bools and select mixer Connor McAdams
2018-09-18 18:33 ` [PATCH 05/15] ALSA: hda/ca0132 - Change ca0132_mmio_init for AE-5 Connor McAdams
2018-09-18 18:33 ` [PATCH 06/15] ALSA: hda/ca0132 - Add AE-5 pre-init and ca0113 functions Connor McAdams
2018-09-18 18:33 ` [PATCH 07/15] ALSA: hda/ca0132 - Add AE-5 regular init setup Connor McAdams
2018-09-18 18:33 ` [PATCH 08/15] ALSA: hda/ca0132 - Change firmware name and usage Connor McAdams
2018-09-18 18:33 ` [PATCH 09/15] ALSA: hda/ca0132 - Merge post-dsp functions + cleanup Connor McAdams
2018-09-18 18:33 ` [PATCH 10/15] ALSA: hda/ca0132 - Add DSP setup functions for AE-5 Connor McAdams
2018-09-18 18:33 ` [PATCH 11/15] ALSA: hda/ca0132 - Clean up ca0132_alt_out_select Connor McAdams
2018-09-18 18:33 ` [PATCH 12/15] ALSA: hda/ca0132 - Add output set commands for AE-5 Connor McAdams
2018-09-18 18:33 ` Connor McAdams [this message]
2018-09-18 18:33 ` [PATCH 14/15] ALSA: hda/ca0132 - Add AE-5 specific controls Connor McAdams
2018-09-18 18:33 ` [PATCH 15/15] ALSA: hda/ca0132 - Add AE-5 exit function Connor McAdams
2018-09-20 7:23 ` [PATCH 00/15] Add support for Sound BlasterX AE-5 Takashi Iwai
2018-09-20 14:15 ` Connor McAdams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537295625-8082-14-git-send-email-conmanx360@gmail.com \
--to=conmanx360@gmail.com \
--cc=alastair.bridgewater@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o-takashi@sakamocchi.jp \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).