From: Stephen Boyd <sboyd@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Michael Turquette <mturquette@baylibre.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: Re: [PATCH v2 00/22] clk: at91: Rework DT bindings
Date: Wed, 17 Oct 2018 09:50:20 -0700 [thread overview]
Message-ID: <153979502020.5275.12406468543355327223@swboyd.mtv.corp.google.com> (raw)
In-Reply-To: <20181016142200.19741-1-alexandre.belloni@bootlin.com>
Quoting Alexandre Belloni (2018-10-16 07:21:38)
> This is the promised rework of the at91 PMC clocks driver. It is mainly
> necessary to remove the DTC warnings but it also complies with the CCF
> rule that there should be one node per controller instead of one node
> per clock.
>
> This only handles the PMC, I'm planning to also rework the SCKC bindings
> later (without breaking the DT ABI).
>
> The series is based on top of v4.19-rc1.
>
> The first two patches are actually fixes and may be considered for this
> cycle.
>
> I'll take the device tree changes through the at91 tree as DT backward
> compatibility is working.
>
I get the following warnings and errors from my auto checker script:
ERROR: need consistent spacing around '+' (ctx:WxV)
#167: FILE: drivers/clk/at91/sama5d4.c:137:
+ sama5d4_pmc = pmc_data_allocate(PMC_MCK2 +1,
^
drivers/clk/at91/clk-i2s-mux.c:49:15: warning: symbol 'at91_clk_i2s_mux_register' was not declared. Should it be static?
drivers/clk/at91/clk-audio-pll.c:447:15: warning: symbol 'at91_clk_register_audio_pll_frac' was not declared. Should it be static?
drivers/clk/at91/clk-audio-pll.c:477:15: warning: symbol 'at91_clk_register_audio_pll_pad' was not declared. Should it be static?
drivers/clk/at91/clk-audio-pll.c:508:15: warning: symbol 'at91_clk_register_audio_pll_pmc' was not declared. Should it be static?
drivers/clk/at91/sama5d4.c:123 sama5d4_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/sama5d4.c:129 sama5d4_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/sama5d2.c:140 sama5d2_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/sama5d2.c:146 sama5d2_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/at91sam9x5.c:132 at91sam9x5_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/at91sam9x5.c:138 at91sam9x5_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/at91sam9rl.c:76 at91sam9rl_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/at91sam9rl.c:82 at91sam9rl_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/at91sam9260.c:341 at91sam926x_pmc_setup() warn: unsigned 'i' is never less than zero.
drivers/clk/at91/at91sam9260.c:347 at91sam926x_pmc_setup() warn: unsigned 'i' is never less than zero.
I fixed them with the below patch, that I'll squash into the right
place. Things look good!
diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index 49aeee6c31a6..b1af5a395423 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -334,7 +334,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
const char *slck_name;
struct regmap *regmap;
struct clk_hw *hw;
- unsigned int i;
+ int i;
bool bypass;
i = of_property_match_string(np, "clock-names", "slow_xtal");
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 5532fba5825b..5aeef68b4bdd 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -70,7 +70,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
const char *parent_names[6];
struct regmap *regmap;
struct clk_hw *hw;
- unsigned int i;
+ int i;
i = of_property_match_string(np, "clock-names", "slow_clk");
if (i < 0)
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 3cdf227ce159..2fe225a697df 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -125,7 +125,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
const char *parent_names[6];
struct regmap *regmap;
struct clk_hw *hw;
- unsigned int i;
+ int i;
bool bypass;
i = of_property_match_string(np, "clock-names", "slow_clk");
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index 96e3c6405351..36d77146a3bd 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -43,6 +43,8 @@
#include <linux/regmap.h>
#include <linux/slab.h>
+#include "pmc.h"
+
#define AUDIO_PLL_DIV_FRAC BIT(22)
#define AUDIO_PLL_ND_MAX (AT91_PMC_AUDIO_PLL_ND_MASK >> \
AT91_PMC_AUDIO_PLL_ND_OFFSET)
diff --git a/drivers/clk/at91/clk-i2s-mux.c b/drivers/clk/at91/clk-i2s-mux.c
index dfdffa5409e6..fe6ce172b8b0 100644
--- a/drivers/clk/at91/clk-i2s-mux.c
+++ b/drivers/clk/at91/clk-i2s-mux.c
@@ -14,6 +14,8 @@
#include <soc/at91/atmel-sfr.h>
+#include "pmc.h"
+
struct clk_i2s_mux {
struct clk_hw hw;
struct regmap *regmap;
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 07f1f1d613ff..d69ad96fe988 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -133,7 +133,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
const char *parent_names[6];
struct regmap *regmap, *regmap_sfr;
struct clk_hw *hw;
- unsigned int i;
+ int i;
bool bypass;
i = of_property_match_string(np, "clock-names", "slow_clk");
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 64b9f438f73b..e358be7f6c8d 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -116,7 +116,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
const char *parent_names[5];
struct regmap *regmap;
struct clk_hw *hw;
- unsigned int i;
+ int i;
bool bypass;
i = of_property_match_string(np, "clock-names", "slow_clk");
@@ -134,7 +134,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
if (IS_ERR(regmap))
return;
- sama5d4_pmc = pmc_data_allocate(PMC_MCK2 +1,
+ sama5d4_pmc = pmc_data_allocate(PMC_MCK2 + 1,
nck(sama5d4_systemck),
nck(sama5d4_periph32ck), 0);
if (!sama5d4_pmc)
next prev parent reply other threads:[~2018-10-17 16:50 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 14:21 [PATCH v2 00/22] clk: at91: Rework DT bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 01/22] clk: at91: audio-pll: fix audio pmc type Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 02/22] clk: at91: generated: SSCs don't have a gclk Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 03/22] clk: at91: h32mx: separate registration from DT parsing Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 04/22] clk: at91: audio-pll: " Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 05/22] clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 06/22] clk: at91: allow clock registration from C code Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 07/22] clk: at91: add pmc_data struct and helpers Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 08/22] dt-bindings: clk: at91: Document new PMC binding Alexandre Belloni
2018-10-17 17:49 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 09/22] clk: at91: add new DT lookup function Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 10/22] clk: at91: add sama5d4 pmc driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 11/22] clk: at91: add sama5d2 PMC driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 12/22] clk: at91: add at91sam9260 " Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 13/22] clk: at91: add at91sam9x5 PMCs driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 14/22] clk: at91: add at91sam9rl PMC driver Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 15/22] clk: at91: move DT compatibility code to its own file Alexandre Belloni
2018-10-17 17:50 ` Stephen Boyd
2018-10-16 14:21 ` [PATCH v2 16/22] ARM: dts: at91: sama5d4: switch to new clock bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 17/22] ARM: dts: at91: sama5d2: switch to new binding Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 18/22] ARM: dts: at91: at91sam9260: switch to new clock bindings Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 19/22] ARM: dts: at91: at91sam9261: " Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 20/22] ARM: dts: at91: at91sam9263: " Alexandre Belloni
2018-10-16 14:21 ` [PATCH v2 21/22] ARM: dts: at91: at91sam9x5: " Alexandre Belloni
2018-10-16 14:22 ` [PATCH v2 22/22] ARM: dts: at91: at91sam9rl: " Alexandre Belloni
2018-10-17 16:50 ` Stephen Boyd [this message]
2018-10-17 17:27 ` [PATCH v2 00/22] clk: at91: Rework DT bindings Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=153979502020.5275.12406468543355327223@swboyd.mtv.corp.google.com \
--to=sboyd@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).