From: shifu0704@thundersoft.com
To: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org
Cc: dmurphy@ti.com, navada@ti.com, Frank Shi <shifu0704@thundersoft.com>
Subject: [PATCH] tas2770: add tas2770 smart PA dt bindings
Date: Fri, 6 Sep 2019 15:06:03 +0800 [thread overview]
Message-ID: <1567753564-13699-1-git-send-email-shifu0704@thundersoft.com> (raw)
From: Frank Shi <shifu0704@thundersoft.com>
add tas2770 smart PA dt bindings
Signed-off-by: Frank Shi <shifu0704@thundersoft.com>
---
Documentation/devicetree/bindings/tas2770.txt | 38 +++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/tas2770.txt
diff --git a/Documentation/devicetree/bindings/tas2770.txt b/Documentation/devicetree/bindings/tas2770.txt
new file mode 100644
index 0000000..f70b310
--- /dev/null
+++ b/Documentation/devicetree/bindings/tas2770.txt
@@ -0,0 +1,38 @@
+Texas Instruments TAS2770 Smart PA
+
+The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
+efficiently driving high peak power into small loudspeakers.
+Integrated speaker voltage and current sense provides for
+real time monitoring of loudspeaker behavior.
+
+Required properties:
+
+ - compatible: - Should contain "ti,tas2770".
+ - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>.
+ - #address-cells - Should be <1>.
+ - #size-cells - Should be <0>.
+ - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling.
+ - ti,left-slot: - Sets TDM RX left time slots.
+ - ti,right-slot: - Sets TDM RX right time slots.
+ - ti,imon-slot-no:- TDM TX current sense time slot.
+ - ti,vmon-slot-no:- TDM TX voltage sense time slot.
+
+Optional properties:
+
+ - reset-gpio: Reset GPIO number of left device.
+ - irq-gpio: IRQ GPIO number of left device.
+
+Examples:
+
+ tas2770@4c {
+ compatible = "ti,tas2770";
+ reg = <0x4c>;
+ reset-gpio = <&gpio15 1 GPIO_ACTIVE_LOW>;
+ irq-gpio = <&gpio16 1 GPIO_ACTIVE_LOW>;
+ ti,asi-format = <0>;
+ ti,left-slot = <0>;
+ ti,right-slot = <1>;
+ ti,imon-slot-no = <0>;
+ ti,vmon-slot-no = <2>;
+ };
+
--
2.7.4
next reply other threads:[~2019-09-06 7:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 7:06 shifu0704 [this message]
2019-09-06 7:06 ` [PATCH] tas2770: add tas2770 smart PA kernel driver shifu0704
2019-09-10 12:33 ` Mark Brown
2019-09-10 13:58 ` Dan Murphy
2019-09-10 11:37 ` [PATCH] tas2770: add tas2770 smart PA dt bindings Mark Brown
2019-09-10 13:21 ` Dan Murphy
2019-09-10 13:47 ` Dan Murphy
2019-09-11 10:01 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567753564-13699-1-git-send-email-shifu0704@thundersoft.com \
--to=shifu0704@thundersoft.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dmurphy@ti.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=navada@ti.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).