From: Liu Yi L <yi.l.liu@intel.com>
To: alex.williamson@redhat.com, kwankhede@nvidia.com
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
kevin.tian@intel.com, joro@8bytes.org, peterx@redhat.com,
baolu.lu@linux.intel.com, Liu Yi L <yi.l.liu@intel.com>
Subject: [PATCH v4 01/12] vfio_pci: refine user config reference in vfio-pci module
Date: Tue, 7 Jan 2020 20:01:38 +0800 [thread overview]
Message-ID: <1578398509-26453-2-git-send-email-yi.l.liu@intel.com> (raw)
In-Reply-To: <1578398509-26453-1-git-send-email-yi.l.liu@intel.com>
This patch adds three fields in struct vfio_pci_device to pass the user
configurations of vfio-pci.ko module to some functions which could be
common in future usage. The values stored in struct vfio_pci_device will
be initiated in probe and refreshed in device open phase to allow runtime
modifications to parameters. e.g. disable_idle_d3 and nointxmask.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
---
drivers/vfio/pci/vfio_pci.c | 37 ++++++++++++++++++++++++++-----------
drivers/vfio/pci/vfio_pci_private.h | 8 ++++++++
2 files changed, 34 insertions(+), 11 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 379a02c..af507c2 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -54,10 +54,10 @@ module_param(disable_idle_d3, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(disable_idle_d3,
"Disable using the PCI D3 low power state for idle, unused devices");
-static inline bool vfio_vga_disabled(void)
+static inline bool vfio_vga_disabled(struct vfio_pci_device *vdev)
{
#ifdef CONFIG_VFIO_PCI_VGA
- return disable_vga;
+ return vdev->disable_vga;
#else
return true;
#endif
@@ -78,7 +78,8 @@ static unsigned int vfio_pci_set_vga_decode(void *opaque, bool single_vga)
unsigned char max_busnr;
unsigned int decodes;
- if (single_vga || !vfio_vga_disabled() || pci_is_root_bus(pdev->bus))
+ if (single_vga || !vfio_vga_disabled(vdev) ||
+ pci_is_root_bus(pdev->bus))
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
@@ -289,7 +290,7 @@ static int vfio_pci_enable(struct vfio_pci_device *vdev)
if (!vdev->pci_saved_state)
pci_dbg(pdev, "%s: Couldn't store saved state\n", __func__);
- if (likely(!nointxmask)) {
+ if (likely(!vdev->nointxmask)) {
if (vfio_pci_nointx(pdev)) {
pci_info(pdev, "Masking broken INTx support\n");
vdev->nointx = true;
@@ -326,7 +327,7 @@ static int vfio_pci_enable(struct vfio_pci_device *vdev)
} else
vdev->msix_bar = 0xFF;
- if (!vfio_vga_disabled() && vfio_pci_is_vga(pdev))
+ if (!vfio_vga_disabled(vdev) && vfio_pci_is_vga(pdev))
vdev->has_vga = true;
@@ -462,10 +463,17 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
vfio_pci_try_bus_reset(vdev);
- if (!disable_idle_d3)
+ if (!vdev->disable_idle_d3)
vfio_pci_set_power_state(vdev, PCI_D3hot);
}
+void vfio_pci_refresh_config(struct vfio_pci_device *vdev,
+ bool nointxmask, bool disable_idle_d3)
+{
+ vdev->nointxmask = nointxmask;
+ vdev->disable_idle_d3 = disable_idle_d3;
+}
+
static void vfio_pci_release(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
@@ -490,6 +498,8 @@ static int vfio_pci_open(void *device_data)
if (!try_module_get(THIS_MODULE))
return -ENODEV;
+ vfio_pci_refresh_config(vdev, nointxmask, disable_idle_d3);
+
mutex_lock(&vdev->reflck->lock);
if (!vdev->refcnt) {
@@ -1330,6 +1340,11 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&vdev->irqlock);
mutex_init(&vdev->ioeventfds_lock);
INIT_LIST_HEAD(&vdev->ioeventfds_list);
+ vdev->nointxmask = nointxmask;
+#ifdef CONFIG_VFIO_PCI_VGA
+ vdev->disable_vga = disable_vga;
+#endif
+ vdev->disable_idle_d3 = disable_idle_d3;
ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
if (ret) {
@@ -1354,7 +1369,7 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
vfio_pci_probe_power_state(vdev);
- if (!disable_idle_d3) {
+ if (!vdev->disable_idle_d3) {
/*
* pci-core sets the device power state to an unknown value at
* bootup and after being removed from a driver. The only
@@ -1385,7 +1400,7 @@ static void vfio_pci_remove(struct pci_dev *pdev)
kfree(vdev->region);
mutex_destroy(&vdev->ioeventfds_lock);
- if (!disable_idle_d3)
+ if (!vdev->disable_idle_d3)
vfio_pci_set_power_state(vdev, PCI_D0);
kfree(vdev->pm_save);
@@ -1620,7 +1635,7 @@ static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev)
if (!ret) {
tmp->needs_reset = false;
- if (tmp != vdev && !disable_idle_d3)
+ if (tmp != vdev && !tmp->disable_idle_d3)
vfio_pci_set_power_state(tmp, PCI_D3hot);
}
@@ -1636,7 +1651,7 @@ static void __exit vfio_pci_cleanup(void)
vfio_pci_uninit_perm_bits();
}
-static void __init vfio_pci_fill_ids(void)
+static void __init vfio_pci_fill_ids(char *ids)
{
char *p, *id;
int rc;
@@ -1691,7 +1706,7 @@ static int __init vfio_pci_init(void)
if (ret)
goto out_driver;
- vfio_pci_fill_ids();
+ vfio_pci_fill_ids(ids);
return 0;
diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
index 8a2c760..0398608 100644
--- a/drivers/vfio/pci/vfio_pci_private.h
+++ b/drivers/vfio/pci/vfio_pci_private.h
@@ -122,6 +122,11 @@ struct vfio_pci_device {
struct list_head dummy_resources_list;
struct mutex ioeventfds_lock;
struct list_head ioeventfds_list;
+ bool nointxmask;
+#ifdef CONFIG_VFIO_PCI_VGA
+ bool disable_vga;
+#endif
+ bool disable_idle_d3;
};
#define is_intx(vdev) (vdev->irq_type == VFIO_PCI_INTX_IRQ_INDEX)
@@ -130,6 +135,9 @@ struct vfio_pci_device {
#define is_irq_none(vdev) (!(is_intx(vdev) || is_msi(vdev) || is_msix(vdev)))
#define irq_is(vdev, type) (vdev->irq_type == type)
+extern void vfio_pci_refresh_config(struct vfio_pci_device *vdev,
+ bool nointxmask, bool disable_idle_d3);
+
extern void vfio_pci_intx_mask(struct vfio_pci_device *vdev);
extern void vfio_pci_intx_unmask(struct vfio_pci_device *vdev);
--
2.7.4
next prev parent reply other threads:[~2020-01-07 12:21 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-07 12:01 [PATCH v4 00/12] vfio_pci: wrap pci device as a mediated device Liu Yi L
2020-01-07 12:01 ` Liu Yi L [this message]
2020-01-09 22:48 ` [PATCH v4 01/12] vfio_pci: refine user config reference in vfio-pci module Alex Williamson
2020-01-16 12:19 ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 02/12] vfio_pci: move vfio_pci_is_vga/vfio_vga_disabled to header file Liu Yi L
2020-01-15 10:43 ` Cornelia Huck
2020-01-16 12:46 ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 03/12] vfio_pci: refine vfio_pci_driver reference in vfio_pci.c Liu Yi L
2020-01-09 22:48 ` Alex Williamson
2020-01-10 7:35 ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 04/12] vfio_pci: make common functions be extern Liu Yi L
2020-01-15 10:56 ` Cornelia Huck
2020-01-16 12:48 ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 05/12] vfio_pci: duplicate vfio_pci.c Liu Yi L
2020-01-15 11:03 ` Cornelia Huck
2020-01-15 15:12 ` Alex Williamson
2020-01-07 12:01 ` [PATCH v4 06/12] vfio_pci: shrink vfio_pci_common.c Liu Yi L
2020-01-07 12:01 ` [PATCH v4 07/12] vfio_pci: shrink vfio_pci.c Liu Yi L
2020-01-08 11:24 ` kbuild test robot
2020-01-09 22:48 ` Alex Williamson
2020-01-16 12:42 ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 08/12] vfio_pci: duplicate vfio_pci_private.h to include/linux Liu Yi L
2020-01-07 12:01 ` [PATCH v4 09/12] vfio: split vfio_pci_private.h into two files Liu Yi L
2020-01-09 22:48 ` Alex Williamson
2020-01-16 11:59 ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 10/12] vfio: build vfio_pci_common.c into a kernel module Liu Yi L
2020-01-07 12:01 ` [PATCH v4 11/12] samples: add vfio-mdev-pci driver Liu Yi L
2020-01-09 22:48 ` Alex Williamson
2020-01-16 12:33 ` Liu, Yi L
2020-01-16 21:24 ` Alex Williamson
2020-01-18 14:25 ` Liu, Yi L
2020-01-20 21:07 ` Alex Williamson
2020-01-21 7:43 ` Tian, Kevin
2020-01-21 8:43 ` Yan Zhao
2020-01-21 20:04 ` Alex Williamson
2020-01-21 21:54 ` Yan Zhao
2020-01-23 23:33 ` Alex Williamson
2020-01-31 2:26 ` Yan Zhao
2020-01-15 12:30 ` Cornelia Huck
2020-01-16 13:23 ` Liu, Yi L
2020-01-16 17:40 ` Cornelia Huck
2020-01-18 14:23 ` Liu, Yi L
2020-01-20 8:55 ` Cornelia Huck
2020-01-07 12:01 ` [PATCH v4 12/12] samples: refine " Liu Yi L
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578398509-26453-2-git-send-email-yi.l.liu@intel.com \
--to=yi.l.liu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=baolu.lu@linux.intel.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterx@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).