From: Florinel Iordache <florinel.iordache@nxp.com>
To: davem@davemloft.net, netdev@vger.kernel.org, andrew@lunn.ch,
f.fainelli@gmail.com, hkallweit1@gmail.com,
linux@armlinux.org.uk
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com, kuba@kernel.org,
corbet@lwn.net, shawnguo@kernel.org, leoyang.li@nxp.com,
madalin.bucur@oss.nxp.com, ioana.ciornei@nxp.com,
linux-kernel@vger.kernel.org,
Florinel Iordache <florinel.iordache@nxp.com>
Subject: [PATCH net-next v2 2/9] dt-bindings: net: add backplane dt bindings
Date: Fri, 24 Apr 2020 15:46:24 +0300 [thread overview]
Message-ID: <1587732391-3374-3-git-send-email-florinel.iordache@nxp.com> (raw)
In-Reply-To: <1587732391-3374-1-git-send-email-florinel.iordache@nxp.com>
Add ethernet backplane device tree bindings
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
---
.../bindings/net/ethernet-controller.yaml | 3 +-
.../devicetree/bindings/net/ethernet-phy.yaml | 50 +++++++++++++++++++++
.../devicetree/bindings/net/serdes-lane.yaml | 51 ++++++++++++++++++++++
Documentation/devicetree/bindings/net/serdes.yaml | 44 +++++++++++++++++++
4 files changed, 147 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/net/serdes-lane.yaml
create mode 100644 Documentation/devicetree/bindings/net/serdes.yaml
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b6..541cee5 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -93,8 +93,9 @@ properties:
- rxaui
- xaui
- # 10GBASE-KR, XFI, SFI
+ # 10GBASE-KR, 40GBASE-KR4, XFI, SFI
- 10gbase-kr
+ - 40gbase-kr4
- usxgmii
phy-mode:
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 5aa141c..436b5a7 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -161,6 +161,42 @@ properties:
description:
Specifies a reference to a node representing a SFP cage.
+ eq-algorithm:
+ description:
+ Specifies the desired equalization algorithm to be used
+ by the KR link training
+ oneOf:
+ - const: fixed
+ description:
+ Backplane KR using fixed coefficients meaning no
+ equalization algorithm
+ - const: bee
+ description:
+ Backplane KR using 3-Taps Bit Edge Equalization (BEE)
+ algorithm
+
+ eq-init:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ description:
+ Triplet of KR coefficients. Specifies the initialization
+ values for standard KR equalization coefficients used by
+ the link training (pre-cursor, main-cursor, post-cursor)
+
+ eq-params:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Variable size array of KR parameters. Specifies the HW
+ specific parameters used by the link training.
+
+ lane-handle:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Specifies a reference (or array of references) to a node
+ representing the desired SERDES lane (or lanes) used in
+ backplane mode.
+
required:
- reg
@@ -183,3 +219,17 @@ examples:
reset-deassert-us = <2000>;
};
};
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ lane-handle = <&lane_d>;
+ eq-algorithm = "fixed";
+ eq-init = <0x2 0x29 0x5>;
+ eq-params = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/serdes-lane.yaml b/Documentation/devicetree/bindings/net/serdes-lane.yaml
new file mode 100644
index 0000000..ce3581e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/serdes-lane.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/serdes-lane.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Serdes Lane Binding
+
+maintainers:
+ - Florinel Iordache <florinel.iordache@nxp.com>
+
+properties:
+ $nodename:
+ pattern: "^lane(@[a-f0-9]+)?$"
+
+ compatible:
+ oneOf:
+ - const: lane-10g
+ description: Lane part of a 10G SerDes module
+ - const: lane-28g
+ description: Lane part of a 28G SerDes module
+
+ reg:
+ description:
+ Registers memory map offset and size for this lane
+
+ reg-names:
+ description:
+ Names of the register map given in "reg" node.
+
+examples:
+ - |
+ serdes1: serdes@1ea0000 {
+ compatible = "serdes-10g";
+ reg = <0x0 0x1ea0000 0 0x00002000>;
+ reg-names = "serdes", "serdes-10g";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ lane_a: lane@800 {
+ compatible = "lane-10g";
+ reg = <0x800 0x40>;
+ reg-names = "lane", "serdes-lane";
+ };
+ lane_b: lane@840 {
+ compatible = "lane-10g";
+ reg = <0x840 0x40>;
+ reg-names = "lane", "serdes-lane";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/serdes.yaml b/Documentation/devicetree/bindings/net/serdes.yaml
new file mode 100644
index 0000000..fd3da85
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/serdes.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Serdes Module Binding
+
+maintainers:
+ - Florinel Iordache <florinel.iordache@nxp.com>
+
+properties:
+ $nodename:
+ pattern: "^serdes(@[a-f0-9]+)?$"
+
+ compatible:
+ oneOf:
+ - const: serdes-10g
+ description: SerDes module type of 10G
+ - const: serdes-28g
+ description: SerDes module type of 28G
+
+ reg:
+ description:
+ Registers memory map offset and size for this serdes module
+
+ reg-names:
+ description:
+ Names of the register map given in "reg" node.
+
+ little-endian:
+ description:
+ Specifies the endianness of serdes module
+ For complete definition see
+ Documentation/devicetree/bindings/common-properties.txt
+
+examples:
+ - |
+ serdes1: serdes@1ea0000 {
+ compatible = "serdes-10g";
+ reg = <0x0 0x1ea0000 0 0x00002000>;
+ reg-names = "serdes", "serdes-10g";
+ little-endian;
+ };
--
1.9.1
next prev parent reply other threads:[~2020-04-24 12:46 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 12:46 [PATCH net-next v2 0/9] net: ethernet backplane support Florinel Iordache
2020-04-24 12:46 ` [PATCH net-next v2 1/9] doc: net: add backplane documentation Florinel Iordache
2020-04-25 10:28 ` Russell King - ARM Linux admin
2020-04-24 12:46 ` Florinel Iordache [this message]
2020-04-24 19:55 ` [PATCH net-next v2 2/9] dt-bindings: net: add backplane dt bindings Rob Herring
2020-04-25 10:27 ` Russell King - ARM Linux admin
2020-04-24 12:46 ` [PATCH net-next v2 3/9] net: phy: add kr phy connection type Florinel Iordache
2020-04-24 13:42 ` Andrew Lunn
2020-04-25 10:22 ` Russell King - ARM Linux admin
2020-04-24 12:46 ` [PATCH net-next v2 4/9] net: fman: add kr support for dpaa1 mac Florinel Iordache
2020-04-24 12:46 ` [PATCH net-next v2 5/9] net: dpaa2: add kr support for dpaa2 mac Florinel Iordache
2020-04-24 12:46 ` [PATCH net-next v2 6/9] net: phy: add backplane kr driver support Florinel Iordache
2020-04-24 13:47 ` Andrew Lunn
2020-04-24 13:52 ` Andrew Lunn
2020-04-25 10:47 ` Russell King - ARM Linux admin
2020-04-24 12:46 ` [PATCH net-next v2 7/9] net: phy: enable qoriq backplane support Florinel Iordache
2020-04-25 10:52 ` Russell King - ARM Linux admin
2020-04-24 12:46 ` [PATCH net-next v2 8/9] net: phy: add bee algorithm for kr training Florinel Iordache
2020-04-24 12:46 ` [PATCH net-next v2 9/9] arm64: dts: add serdes and mdio description Florinel Iordache
2020-04-24 13:26 ` [PATCH net-next v2 0/9] net: ethernet backplane support Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1587732391-3374-3-git-send-email-florinel.iordache@nxp.com \
--to=florinel.iordache@nxp.com \
--cc=andrew@lunn.ch \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=madalin.bucur@oss.nxp.com \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).