From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Michal Simek <michal.simek@xilinx.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <git@xilinx.com>,
<saikrishna12468@gmail.com>,
Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Subject: [PATCH v6 1/3] firmware: xilinx: Add pinctrl support
Date: Thu, 22 Apr 2021 14:00:00 +0530 [thread overview]
Message-ID: <1619080202-31924-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> (raw)
In-Reply-To: <1619080202-31924-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com>
Adding pinctrl support to query platform specific information (pins)
from firmware.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/firmware/xilinx/zynqmp.c | 114 +++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 90 +++++++++++++++++++++
2 files changed, 204 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7eb9958662dd..fc01a3632815 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -811,6 +811,120 @@ int zynqmp_pm_fpga_get_status(u32 *value)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
+/**
+ * zynqmp_pm_pinctrl_request - Request Pin from firmware
+ * @pin: Pin number to request
+ *
+ * This function requests pin from firmware.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_request(const u32 pin)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_REQUEST, pin, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_request);
+
+/**
+ * zynqmp_pm_pinctrl_release - Inform firmware that Pin control is released
+ * @pin: Pin number to release
+ *
+ * This function release pin from firmware.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_release(const u32 pin)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_RELEASE, pin, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_release);
+
+/**
+ * zynqmp_pm_pinctrl_get_function - Read function id set for the given pin
+ * @pin: Pin number
+ * @id: Buffer to store function ID
+ *
+ * This function provides the function currently set for the given pin.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!id)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_PINCTRL_GET_FUNCTION, pin, 0,
+ 0, 0, ret_payload);
+ *id = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_function);
+
+/**
+ * zynqmp_pm_pinctrl_set_function - Set requested function for the pin
+ * @pin: Pin number
+ * @id: Function ID to set
+ *
+ * This function sets requested function for the given pin.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_SET_FUNCTION, pin, id,
+ 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_function);
+
+/**
+ * zynqmp_pm_pinctrl_get_config - Get configuration parameter for the pin
+ * @pin: Pin number
+ * @param: Parameter to get
+ * @value: Buffer to store parameter value
+ *
+ * This function gets requested configuration parameter for the given pin.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
+ u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_GET, pin, param,
+ 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_config);
+
+/**
+ * zynqmp_pm_pinctrl_set_config - Set configuration parameter for the pin
+ * @pin: Pin number
+ * @param: Parameter to set
+ * @value: Parameter value to set
+ *
+ * This function sets requested configuration parameter for the given pin.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
+ u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_SET, pin,
+ param, value, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
+
/**
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 71177b17eee5..8285a4bcfc2d 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -72,6 +72,12 @@ enum pm_api_id {
PM_FPGA_LOAD = 22,
PM_FPGA_GET_STATUS = 23,
PM_GET_CHIPID = 24,
+ PM_PINCTRL_REQUEST = 28,
+ PM_PINCTRL_RELEASE = 29,
+ PM_PINCTRL_GET_FUNCTION = 30,
+ PM_PINCTRL_SET_FUNCTION = 31,
+ PM_PINCTRL_CONFIG_PARAM_GET = 32,
+ PM_PINCTRL_CONFIG_PARAM_SET = 33,
PM_IOCTL = 34,
PM_QUERY_DATA = 35,
PM_CLOCK_ENABLE = 36,
@@ -122,6 +128,12 @@ enum pm_query_id {
PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS = 3,
PM_QID_CLOCK_GET_PARENTS = 4,
PM_QID_CLOCK_GET_ATTRIBUTES = 5,
+ PM_QID_PINCTRL_GET_NUM_PINS = 6,
+ PM_QID_PINCTRL_GET_NUM_FUNCTIONS = 7,
+ PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS = 8,
+ PM_QID_PINCTRL_GET_FUNCTION_NAME = 9,
+ PM_QID_PINCTRL_GET_FUNCTION_GROUPS = 10,
+ PM_QID_PINCTRL_GET_PIN_GROUPS = 11,
PM_QID_CLOCK_GET_NUM_CLOCKS = 12,
PM_QID_CLOCK_GET_MAX_DIVISOR = 13,
};
@@ -285,6 +297,44 @@ enum dll_reset_type {
PM_DLL_RESET_PULSE = 2,
};
+enum pm_pinctrl_config_param {
+ PM_PINCTRL_CONFIG_SLEW_RATE = 0,
+ PM_PINCTRL_CONFIG_BIAS_STATUS = 1,
+ PM_PINCTRL_CONFIG_PULL_CTRL = 2,
+ PM_PINCTRL_CONFIG_SCHMITT_CMOS = 3,
+ PM_PINCTRL_CONFIG_DRIVE_STRENGTH = 4,
+ PM_PINCTRL_CONFIG_VOLTAGE_STATUS = 5,
+ PM_PINCTRL_CONFIG_TRI_STATE = 6,
+ PM_PINCTRL_CONFIG_MAX = 7,
+};
+
+enum pm_pinctrl_slew_rate {
+ PM_PINCTRL_SLEW_RATE_FAST = 0,
+ PM_PINCTRL_SLEW_RATE_SLOW = 1,
+};
+
+enum pm_pinctrl_bias_status {
+ PM_PINCTRL_BIAS_DISABLE = 0,
+ PM_PINCTRL_BIAS_ENABLE = 1,
+};
+
+enum pm_pinctrl_pull_ctrl {
+ PM_PINCTRL_BIAS_PULL_DOWN = 0,
+ PM_PINCTRL_BIAS_PULL_UP = 1,
+};
+
+enum pm_pinctrl_schmitt_cmos {
+ PM_PINCTRL_INPUT_TYPE_CMOS = 0,
+ PM_PINCTRL_INPUT_TYPE_SCHMITT = 1,
+};
+
+enum pm_pinctrl_drive_strength {
+ PM_PINCTRL_DRIVE_STRENGTH_2MA = 0,
+ PM_PINCTRL_DRIVE_STRENGTH_4MA = 1,
+ PM_PINCTRL_DRIVE_STRENGTH_8MA = 2,
+ PM_PINCTRL_DRIVE_STRENGTH_12MA = 3,
+};
+
enum zynqmp_pm_shutdown_type {
ZYNQMP_PM_SHUTDOWN_TYPE_SHUTDOWN = 0,
ZYNQMP_PM_SHUTDOWN_TYPE_RESET = 1,
@@ -353,6 +403,14 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
int zynqmp_pm_read_pggs(u32 index, u32 *value);
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_pinctrl_request(const u32 pin);
+int zynqmp_pm_pinctrl_release(const u32 pin);
+int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id);
+int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id);
+int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
+ u32 *value);
+int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
+ u32 value);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
@@ -537,6 +595,38 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_pinctrl_request(const u32 pin)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_pinctrl_release(const u32 pin)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
+ u32 *value)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
+ u32 value)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.17.1
next prev parent reply other threads:[~2021-04-22 8:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-22 8:29 [PATCH v6 0/3] Add ZynqMP pinctrl driver Sai Krishna Potthuri
2021-04-22 8:30 ` Sai Krishna Potthuri [this message]
2021-04-22 8:30 ` [PATCH v6 2/3] dt-bindings: pinctrl: Add binding for " Sai Krishna Potthuri
2021-04-22 8:30 ` [PATCH v6 3/3] pinctrl: Add Xilinx ZynqMP pinctrl driver support Sai Krishna Potthuri
2021-04-23 15:53 ` Andy Shevchenko
2021-04-26 13:20 ` Sai Krishna Potthuri
2021-04-26 14:04 ` Andy Shevchenko
2021-04-27 7:23 ` Michal Simek
2021-04-27 7:31 ` Andy Shevchenko
2021-04-27 7:38 ` Michal Simek
2021-04-27 8:39 ` Andy Shevchenko
2021-04-27 9:59 ` Michal Simek
2021-04-27 14:04 ` Andy Shevchenko
2021-04-28 5:33 ` Sai Krishna Potthuri
2021-05-11 12:38 ` Sai Krishna Potthuri
2021-06-17 6:37 ` Sai Krishna Potthuri
2021-06-17 7:18 ` Andy Shevchenko
2021-06-17 7:31 ` Greg Kroah-Hartman
2021-04-22 9:13 ` [PATCH v6 0/3] Add ZynqMP pinctrl driver Linus Walleij
2021-04-23 15:54 ` Andy Shevchenko
2021-04-29 14:21 ` Linus Walleij
2021-04-29 14:32 ` Sai Krishna Potthuri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1619080202-31924-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com \
--to=lakshmi.sai.krishna.potthuri@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=saikrishna12468@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).