From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: viresh.kumar@linaro.org, swboyd@chromium.org, agross@kernel.org,
robh+dt@kernel.org, rjw@rjwysocki.net,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
dianders@chromium.org, mka@chromium.org,
Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 2/2] arm64: dts: qcom: sc7280: Add cpu OPP tables
Date: Fri, 30 Apr 2021 19:58:21 +0530 [thread overview]
Message-ID: <1619792901-32701-3-git-send-email-sibis@codeaurora.org> (raw)
In-Reply-To: <1619792901-32701-1-git-send-email-sibis@codeaurora.org>
Add OPP tables required to scale DDR/L3 per freq-domain on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 135 +++++++++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0bb835aeae33..90220cecb368 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -71,6 +72,9 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_0: l2-cache {
compatible = "cache";
@@ -90,6 +94,9 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_100: l2-cache {
compatible = "cache";
@@ -106,6 +113,9 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_200>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_200: l2-cache {
compatible = "cache";
@@ -122,6 +132,9 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_300>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_300: l2-cache {
compatible = "cache";
@@ -138,6 +151,9 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_400>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_400: l2-cache {
compatible = "cache";
@@ -154,6 +170,9 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_500>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_500: l2-cache {
compatible = "cache";
@@ -170,6 +189,9 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_600>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_600: l2-cache {
compatible = "cache";
@@ -186,6 +208,9 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_700>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+ <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
qcom,freq-domain = <&cpufreq_hw 2>;
L2_700: l2-cache {
compatible = "cache";
@@ -248,6 +273,116 @@
};
};
+ cpu0_opp_table: cpu0_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu0_opp1: opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <800000 9600000>;
+ };
+
+ cpu0_opp2: opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-peak-kBps = <800000 17817600>;
+ };
+
+ cpu0_opp3: opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ opp-peak-kBps = <800000 20889600>;
+ };
+
+ cpu0_opp4: opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <1804000 24576000>;
+ };
+
+ cpu0_opp5: opp-1152000000 {
+ opp-hz = /bits/ 64 <1152000000>;
+ opp-peak-kBps = <2188000 27033600>;
+ };
+
+ cpu0_opp6: opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-peak-kBps = <2188000 33792000>;
+ };
+
+ cpu0_opp7: opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <3072000 38092800>;
+ };
+
+ cpu0_opp8: opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <3072000 41779200>;
+ };
+
+ cpu0_opp9: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <4068000 48537600>;
+ };
+
+ cpu0_opp10: opp-1958400000 {
+ opp-hz = /bits/ 64 <1958400000>;
+ opp-peak-kBps = <4068000 48537600>;
+ };
+ };
+
+ cpu4_opp_table: cpu4_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu4_opp1: opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-peak-kBps = <1804000 9600000>;
+ };
+
+ cpu4_opp2: opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <2188000 17817600>;
+ };
+
+ cpu4_opp3: opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-peak-kBps = <4068000 24576000>;
+ };
+
+ cpu4_opp4: opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ opp-peak-kBps = <4068000 24576000>;
+ };
+
+ cpu4_opp5: opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <4068000 24576000>;
+ };
+
+ cpu4_opp6: opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <6220000 38092800>;
+ };
+
+ cpu4_opp7: opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <6220000 44851200>;
+ };
+
+ cpu4_opp8: opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-peak-kBps = <6220000 44851200>;
+ };
+
+ cpu4_opp9: opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ opp-peak-kBps = <6220000 44851200>;
+ };
+
+ cpu4_opp10: opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-peak-kBps = <6832000 48537600>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-04-30 14:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-30 14:28 [PATCH 0/2] DDR/L3 Scaling support on SC7280 SoCs Sibi Sankar
2021-04-30 14:28 ` [PATCH 1/2] cpufreq: blacklist SC7280 in cpufreq-dt-platdev Sibi Sankar
2021-05-03 16:20 ` Matthias Kaehlcke
2021-04-30 14:28 ` Sibi Sankar [this message]
2021-05-03 16:36 ` [PATCH 2/2] arm64: dts: qcom: sc7280: Add cpu OPP tables Matthias Kaehlcke
2021-05-04 7:05 ` Sibi Sankar
2021-05-04 14:42 ` Sudeep Holla
2021-05-04 18:25 ` Sibi Sankar
2021-05-04 19:16 ` Matthias Kaehlcke
2021-05-05 8:49 ` Sudeep Holla
2021-05-05 10:09 ` Sibi Sankar
2021-05-05 11:41 ` Sudeep Holla
2021-05-05 11:37 ` Viresh Kumar
2021-05-05 11:44 ` Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1619792901-32701-3-git-send-email-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mka@chromium.org \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).