From: Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
To: alan@lxorguk.ukuu.org.uk (Alan Cox),
linux-kernel@vger.kernel.org (kernel list),
faith@valinux.com, elenstev@mesatop.com
Subject: Re: [PATCH] double DRM - fixes
Date: Fri, 10 Aug 2001 15:33:01 +0200 (CEST) [thread overview]
Message-ID: <200108101333.PAA01292@green.mif.pg.gda.pl> (raw)
Hi,
This is update of Configure.help file related to the -ac10 DRM version
split and my suggested config fixes (Renamed config variables). Just
duplicated appropriate entries...
BTW: Alan, do you think it would be worth to be able to compile both versions
together (in the modular case) ?
Andrzej
************************************************************************
diff -uNr linux-2.4.7-ac10/Documentation/Configure.help linux/Documentation/Configure.help
--- linux-2.4.7-ac10/Documentation/Configure.help Wed Aug 8 20:13:56 2001
+++ linux/Documentation/Configure.help Fri Aug 10 09:29:55 2001
@@ -16158,6 +16158,12 @@
details. You should also select and configure AGP
(/dev/agpgart) support.
+Build drivers for new (XFree 4.1) DRM
+CONFIG_DRM_NEW
+ If you set this option, the new DRM version needed by XFree86 4.1
+ will be used. Otherwise, the old DRM version will be used,
+ appropriate for XFree86 4.0.
+
3dfx Banshee/Voodoo3+
CONFIG_DRM_TDFX
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
@@ -16190,6 +16196,42 @@
Matrox g200/g400
CONFIG_DRM_MGA
+ Choose this option if you have a Matrox g200 or g400 graphics card. If M
+ is selected, the module will be called mga.o. AGP support is required
+ for this driver to work.
+
+3dfx Banshee/Voodoo3+
+CONFIG_DRM40_TDFX
+ Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+ graphics card. If M is selected, the module will be called tdfx.o.
+
+3dlabs GMX 2000
+CONFIG_DRM40_GAMMA
+ Choose this option if you have a 3dlabs GMX 2000 graphics card.
+ If M is selected, the module will be called gamma.o.
+
+ATI Rage 128
+CONFIG_DRM40_R128
+ Choose this option if you have an ATI Rage 128 graphics card. If M
+ is selected, the module will be called r128.o. AGP support for
+ this card is strongly suggested (unless you have a PCI version).
+
+ATI Radeon
+CONFIG_DRM40_RADEON
+ Choose this option if you have an ATI Radeon graphics card. There
+ are both PCI and AGP versions. You don't need to choose this to
+ run the Radeon in plain VGA mode. There is a product page at
+ <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+ If M is selected, the module will be called radeon.o.
+
+Intel I810
+CONFIG_DRM40_I810
+ Choose this option if you have an Intel I810 graphics card. If M is
+ selected, the module will be called i810.o. AGP support is required
+ for this driver to work.
+
+Matrox g200/g400
+CONFIG_DRM40_MGA
Choose this option if you have a Matrox g200 or g400 graphics card. If M
is selected, the module will be called mga.o. AGP support is required
for this driver to work.
--
=======================================================================
Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl
phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math., Technical University of Gdansk
next reply other threads:[~2001-08-10 13:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-10 13:33 Andrzej Krzysztofowicz [this message]
[not found] <no.id>
2001-08-10 14:20 ` [PATCH] double DRM - fixes Alan Cox
-- strict thread matches above, loose matches on Subject: below --
2001-08-09 23:48 Andrzej Krzysztofowicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200108101333.PAA01292@green.mif.pg.gda.pl \
--to=ankry@green.mif.pg.gda.pl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=elenstev@mesatop.com \
--cc=faith@valinux.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).