Linux version 2.5.64 (root@davetop.wvuced.org) (gcc version 3.2.2) #1 Wed Mar 5 20:33:50 EST 2003 Video mode to be used for restore is 317 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data) BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 PTLTD ) @ 0x000f6ba0 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1fff5e36 ACPI: FADT (v001 IBM TP-A20M 01540.00000) @ 0x1fffeb65 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1fffebd9 ACPI: DSDT (v001 IBM TP A20m 01540.00000) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 Kernel command line: root=/dev/hda3 vga=791 Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 696.848 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1376.25 BogoMIPS Memory: 515028k/524224k available (2239k kernel code, 8452k reserved, 621k data, 148k init, 0k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Failed to register 'sysfs' in sysfs -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030228 ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node dffe3c20), AE_AML_NO_RETURN_VALUE ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PSER] (off) ACPI: Power Resource [PSIO] (on) ACPI: Embedded Controller [EC] (gpe 9) Linux Plug and Play Support v0.95 (c) Adam Belay PnPBIOS: Found PnP BIOS installation structure at 0xc00f6c50 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1d3, dseg 0x400 PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Enabling SEP on CPU 0 aio_setup: sizeof(struct page) = 40 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Capability LSM initialized Initializing Cryptographic API Limiting direct PCI/PCI transfers. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THM0] (65 C) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled devfs_register(tts/1): could not append to parent, err: -17 tts/1 at I/O 0x2f8 (irq = 3) is a 16550A vesafb: framebuffer at 0xf5000000, mapped to 0xe081c000, size 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:504c vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Console: switching to colour frame buffer device 128x48 Real Time Clock Driver v1.11 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Intel 440BX chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xf8000000 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS05-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/7898KiB Cache, CHS=77520/16/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Console: switching to colour frame buffer device 128x48 Yenta IRQ list 00b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 00b8, PCI irq11 Socket status: 30000020 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 00:07.2: irq 11, io base 00001820 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC). cs46xx: failure waiting for FIFO command to complete hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ALSA device list: #0: Sound Fusion CS46xx at 0xf4100000/0xf4000000, irq 11 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ACPI: (supports S0 S1 S3 S4 S5) hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-00:07.2-1 cs: cb_alloc(bus 6): vendor 0x115d, device 0x0003 PCI: Enabling device 06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 06:00.0 to 64 eth0: Xircom cardbus revision 3 at irq 11 PCI: Enabling device 06:00.1 (0000 -> 0003) tts/14 at I/O 0x3080 (irq = 11) is a 16550A found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,3), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3)) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 148k freed Adding 529160k swap on /dev/hda1. Priority:-1 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,2)) for (ide0(3,2)) Using r5 hash to sort names devfs_register(vcc/1): could not append to parent, err: -17 devfs_register(vcc/a1): could not append to parent, err: -17 devfs_register(vcc/1): could not append to parent, err: -17 devfs_register(vcc/a1): could not append to parent, err: -17 xircom cardbus adaptor found, registering as eth0, using irq 11 xircom_cb: Link status has changed xircom_cb: Link is 100 mbit spurious 8259A interrupt: IRQ7.