linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andi Kleen <ak@suse.de>
To: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>,
	patches@x86-64.org, linux-kernel@vger.kernel.org
Subject: [PATCH x86 for review II] [10/39] x86_64: Handle 32 bit PerfMon Counter writes cleanly in x86_64 nmi_watchdog
Date: Mon, 12 Feb 2007 08:37:56 +0100 (CET)	[thread overview]
Message-ID: <20070212073756.96F7B13DA0@wotan.suse.de> (raw)
In-Reply-To: <20070212837.963446000@suse.de>


From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>


P6 CPUs and Core/Core 2 CPUs which has 'architectural perf mon' feature,
only supports write of low 32 bits in Performance Monitoring Counters.
Bits 32..39 are sign extended based on bit 31 and bits 40..63 are reserved
and should be zero.

This patch:

Change x86_64 nmi handler to handle this case cleanly.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>

---
 arch/x86_64/kernel/nmi.c |   46 ++++++++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 14 deletions(-)

Index: linux/arch/x86_64/kernel/nmi.c
===================================================================
--- linux.orig/arch/x86_64/kernel/nmi.c
+++ linux/arch/x86_64/kernel/nmi.c
@@ -214,6 +214,23 @@ static __init void nmi_cpu_busy(void *da
 }
 #endif
 
+static unsigned int adjust_for_32bit_ctr(unsigned int hz)
+{
+	unsigned int retval = hz;
+
+	/*
+	 * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter
+	 * are writable, with higher bits sign extending from bit 31.
+	 * So, we can only program the counter with 31 bit values and
+	 * 32nd bit should be 1, for 33.. to be 1.
+	 * Find the appropriate nmi_hz
+	 */
+ 	if ((((u64)cpu_khz * 1000) / retval) > 0x7fffffffULL) {
+		retval = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1;
+	}
+	return retval;
+}
+
 int __init check_nmi_watchdog (void)
 {
 	int *counts;
@@ -268,17 +285,8 @@ int __init check_nmi_watchdog (void)
 		struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
 
 		nmi_hz = 1;
-		/*
-		 * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter
-		 * are writable, with higher bits sign extending from bit 31.
-		 * So, we can only program the counter with 31 bit values and
-		 * 32nd bit should be 1, for 33.. to be 1.
-		 * Find the appropriate nmi_hz
-		 */
-	 	if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 &&
-			((u64)cpu_khz * 1000) > 0x7fffffffULL) {
-			nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1;
-		}
+	 	if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0)
+			nmi_hz = adjust_for_32bit_ctr(nmi_hz);
 	}
 
 	kfree(counts);
@@ -634,7 +642,9 @@ static int setup_intel_arch_watchdog(voi
 
 	/* setup the timer */
 	wrmsr(evntsel_msr, evntsel, 0);
-	wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
+
+	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
+	wrmsr(perfctr_msr, (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0);
 
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
@@ -855,15 +865,23 @@ int __kprobes nmi_watchdog_tick(struct p
 				dummy &= ~P4_CCCR_OVF;
 	 			wrmsrl(wd->cccr_msr, dummy);
 	 			apic_write(APIC_LVTPC, APIC_DM_NMI);
+				/* start the cycle over again */
+				wrmsrl(wd->perfctr_msr,
+				       -((u64)cpu_khz * 1000 / nmi_hz));
 	 		} else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
 				/*
 				 * ArchPerfom/Core Duo needs to re-unmask
 				 * the apic vector
 				 */
 				apic_write(APIC_LVTPC, APIC_DM_NMI);
+				/* ARCH_PERFMON has 32 bit counter writes */
+				wrmsr(wd->perfctr_msr,
+				     (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0);
+			} else {
+				/* start the cycle over again */
+				wrmsrl(wd->perfctr_msr,
+				       -((u64)cpu_khz * 1000 / nmi_hz));
 			}
-			/* start the cycle over again */
-			wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
 			rc = 1;
 		} else 	if (nmi_watchdog == NMI_IO_APIC) {
 			/* don't know how to accurately check for this.

  parent reply	other threads:[~2007-02-12  7:48 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-12  7:37 [PATCH x86 for review II] [1/39] i386: move startup_32() in text.head section Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [2/39] x86_64: Break init() in two parts to avoid MODPOST warnings Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [3/39] i386: arch/i386/kernel/cpu/mcheck/mce.c should #include <asm/mce.h> Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [4/39] i386: add idle notifier Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [5/39] i386: improve sched_clock() on i686 Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [6/39] i386: romsignature/checksum cleanup Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [7/39] x86_64: Fix fake numa for x86_64 machines with big IO hole Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [8/39] x86_64: Remove fastcall references in x86_64 code Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [9/39] x86_64: Use constant instead of raw number in x86_64 ioperm.c Andi Kleen
2007-02-12  7:37 ` Andi Kleen [this message]
2007-02-12  7:37 ` [PATCH x86 for review II] [11/39] i386: Handle 32 bit PerfMon Counter writes cleanly in i386 nmi_watchdog Andi Kleen
2007-02-12  7:37 ` [PATCH x86 for review II] [12/39] i386: Handle 32 bit PerfMon Counter writes cleanly in oprofile Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [13/39] i386: CONFIG_PHYSICAL_ALIGN limited to 4M? Andi Kleen
2007-02-13  6:36   ` Rene Herman
2007-02-12  7:38 ` [PATCH x86 for review II] [14/39] x86_64: cleanup Doc/x86_64/ files Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [15/39] x86_64: list x86_64 quilt tree Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [16/39] x86: simplify notify_page_fault() Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [17/39] x86_64: Tighten mce_amd driver MSR reads Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [18/39] x86_64: Allow to run a program when a machine check event is detected Andi Kleen
2007-02-12  7:54   ` Oliver Neukum
2007-02-12  8:04     ` Andi Kleen
2007-02-12  8:11       ` Bauke Jan Douma
2007-02-12 15:05       ` [patches] " Pavel Machek
2007-02-12  7:38 ` [PATCH x86 for review II] [19/39] x86_64: remove get_pmd() Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [20/39] i386: Small cleanup to TLB flush code Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [21/39] i386: rdmsr_on_cpu, wrmsr_on_cpu Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [22/39] x86_64: Kconfig typos Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [23/39] i386: use smp_call_function_single() Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [24/39] " Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [25/39] x86_64: Fix preprocessor condition Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [26/39] i386: fix 32-bit ioctls on x64_32 Andi Kleen
2007-02-12 13:24   ` Giuliano Procida
2007-02-12 22:28     ` Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [27/39] i386: APM on i386 Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [28/39] i386: fix size_or_mask and size_and_mask Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [29/39] x86_64: - Ignore long SMI interrupts in clock calibration code - update 1 Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [30/39] x86_64: Check return value of putreg in PTRACE_SETREGS Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [31/39] x86_64: Unexport __supported_pte_mask Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [32/39] x86_64: x86_64 - Fix FS/GS registers for VT execution Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [33/39] x86_64: Fix off by one error in IOMMU boundary checking Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [34/39] i386: Use stack arguments for calling into EFI Andi Kleen
2007-02-12 19:45   ` Frédéric RISS
2007-02-12  7:38 ` [PATCH x86 for review II] [35/39] x86_64: Don't reserve ROMs Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [36/39] x86_64: define dma noncoherent API functions Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [37/39] x86_64: robustify bad_dma_address handling Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [38/39] x86: fix laptop bootup hang in init_acpi() Andi Kleen
2007-02-12  7:38 ` [PATCH x86 for review II] [39/39] i386: All Transmeta CPUs have constant TSCs Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070212073756.96F7B13DA0@wotan.suse.de \
    --to=ak@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@x86-64.org \
    --cc=venkatesh.pallipadi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).