From: Josh Cartwright <josh.cartwright@ni.com>
To: arm@kernel.org, Arnd Bergmann <arnd@arndb.de>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
John Linn <john.linn@xilinx.com>,
Nick Bowler <nbowler@elliptictech.com>,
Michal Simek <michal.simek@xilinx.com>
Subject: [PATCH v4 1/5] zynq: use GIC device tree bindings
Date: Wed, 24 Oct 2012 15:03:10 -0500 [thread overview]
Message-ID: <20121024200310.GB6713@beefymiracle.amer.corp.natinst.com> (raw)
In-Reply-To: <20121024200222.GA6713@beefymiracle.amer.corp.natinst.com>
The Zynq uses the cortex-a9-gic. This eliminates the need to hardcode
register addresses.
Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Cc: John Linn <john.linn@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/boot/dts/zynq-ep107.dts | 8 +++++---
arch/arm/mach-zynq/common.c | 7 ++++++-
arch/arm/mach-zynq/include/mach/zynq_soc.h | 2 --
3 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
index 37ca192..7bfff4a 100644
--- a/arch/arm/boot/dts/zynq-ep107.dts
+++ b/arch/arm/boot/dts/zynq-ep107.dts
@@ -36,10 +36,12 @@
ranges;
intc: interrupt-controller@f8f01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
interrupt-controller;
- compatible = "arm,gic";
- reg = <0xF8F01000 0x1000>;
- #interrupt-cells = <2>;
+ reg = <0xF8F01000 0x1000>,
+ <0xF8F00100 0x100>;
};
uart0: uart@e0000000 {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index ab5cfdd..d73963b 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -55,12 +55,17 @@ static void __init xilinx_init_machine(void)
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
+static struct of_device_id irq_match[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { }
+};
+
/**
* xilinx_irq_init() - Interrupt controller initialization for the GIC.
*/
static void __init xilinx_irq_init(void)
{
- gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+ of_irq_init(irq_match);
}
/* The minimum devices needed to be mapped before the VM system is up and
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
index d0d3f8f..3d1c6a6 100644
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -35,8 +35,6 @@
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
-#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100)
-#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000)
#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT)
/*
--
1.8.0
next prev parent reply other threads:[~2012-10-24 20:03 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 20:02 [PATCH v4 0/5] zynq subarch cleanups Josh Cartwright
2012-10-24 20:03 ` Josh Cartwright [this message]
2012-10-27 13:39 ` [PATCH v4 1/5] zynq: use GIC device tree bindings Michal Simek
2012-10-27 14:00 ` Josh Cartwright
2012-10-27 14:06 ` Michal Simek
2012-10-27 14:42 ` Josh Cartwright
2012-10-27 15:20 ` Michal Simek
2012-11-05 18:35 ` Josh Cartwright
2012-11-07 12:05 ` Michal Simek
2012-11-07 14:17 ` Josh Cartwright
2012-11-08 0:38 ` John Linn
2012-10-24 20:03 ` [PATCH v4 2/5] zynq: use pl310 " Josh Cartwright
2012-10-27 13:40 ` Michal Simek
2012-10-24 20:04 ` [PATCH v4 3/5] zynq: remove use of CLKDEV_LOOKUP Josh Cartwright
2012-10-27 16:47 ` Michal Simek
2012-10-24 20:04 ` [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC Josh Cartwright
2012-10-27 13:59 ` Michal Simek
2012-10-30 22:22 ` Arnd Bergmann
2012-10-31 8:43 ` Michal Simek
2012-10-31 11:36 ` Josh Cartwright
2012-10-24 20:04 ` [PATCH v4 5/5] zynq: move static peripheral mappings Josh Cartwright
2012-10-25 20:17 ` Nick Bowler
2012-10-25 21:29 ` Josh Cartwright
2012-10-25 22:41 ` Nick Bowler
2012-10-25 22:47 ` [PATCH] ARM: zynq: Allow UART1 to be used as DEBUG_LL console Nick Bowler
2012-10-29 16:56 ` Josh Cartwright
2012-10-29 18:13 ` Nick Bowler
2012-10-26 1:03 ` [PATCH v4 5/5] zynq: move static peripheral mappings Josh Cartwright
2012-10-27 16:52 ` Michal Simek
2012-10-28 23:26 [PATCH v4 0/5] zynq subarch cleanups Josh Cartwright
2012-10-18 0:46 ` [PATCH v4 1/5] zynq: use GIC device tree bindings Josh Cartwright
2012-10-29 7:59 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121024200310.GB6713@beefymiracle.amer.corp.natinst.com \
--to=josh.cartwright@ni.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=john.linn@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=nbowler@elliptictech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).