On Sat, Oct 27, 2012 at 01:39:00PM +0000, Michal Simek wrote:
> Hi Josh,
> 
> > -----Original Message-----
> > From: Josh Cartwright [mailto:josh.cartwright@ni.com]
> > Sent: Wednesday, October 24, 2012 10:03 PM
> > To: arm@kernel.org; Arnd Bergmann
> > Cc: linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; John
> > Linn; Nick Bowler; Michal Simek
> > Subject: [PATCH v4 1/5] zynq: use GIC device tree bindings
> >
> > The Zynq uses the cortex-a9-gic.  This eliminates the need to hardcode register
> > addresses.
> >
> > Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
> > Cc: John Linn <john.linn@xilinx.com>
> > Acked-by: Arnd Bergmann <arnd@arndb.de>
> > ---
> >  arch/arm/boot/dts/zynq-ep107.dts           | 8 +++++---
> >  arch/arm/mach-zynq/common.c                | 7 ++++++-
> >  arch/arm/mach-zynq/include/mach/zynq_soc.h | 2 --
> >  3 files changed, 11 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-
> > ep107.dts
> > index 37ca192..7bfff4a 100644
> > --- a/arch/arm/boot/dts/zynq-ep107.dts
> > +++ b/arch/arm/boot/dts/zynq-ep107.dts
> > @@ -36,10 +36,12 @@
> >               ranges;
> >
> >               intc: interrupt-controller@f8f01000 {
> > +                     compatible = "arm,cortex-a9-gic";
> > +                     #interrupt-cells = <3>;
> 
> If you change git to 3 cells format you should also change it for uart below.
>
> Also will be the best to remove this dts entirely and replace it by existing
> Platform.

Do you mean to say get rid of the ep107 entirely and replace it with,
for example, a zc702 dts?

I have a follow up patchset which splits off a zynq-7000.dtsi and a
zynq-zc702.dts, and which also fixes the 3 interrupt cell problem.
Would you like for me to pull this into v5, or spin up a separate patch
series?

Thanks,

  Josh