linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>,
	LKML <linux-kernel@vger.kernel.org>,
	dma <dmaengine@vger.kernel.org>
Subject: [GIT PULL] slave-dmaengine updates
Date: Wed, 9 Apr 2014 21:42:02 +0530	[thread overview]
Message-ID: <20140409161202.GB9846@intel.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 5578 bytes --]

Hey Linus,

Here is the pull request for this merge window. Please pull to receive:
- New driver for Qcom bam dma
- New driver for RCAR peri-peri
- New driver for FSL eDMA
- Various odd fixes and updates thru the subsystem


The following changes since commit b28a960c42fcd9cfc987441fa6d1c1a471f0f9ed:
  Linus Torvalds (1):
        Linux 3.14-rc2

are available in the git repository at:

  git://git.infradead.org/users/vkoul/slave-dma.git for-linus

Alexander Shiyan (2):
      dma: imx-dma: Replace printk with dev_*
      dma: imx-dma: Add missing module owner field

Andy Gross (2):
      dmaengine: qcom_bam_dma: Add device tree binding
      dmaengine: add Qualcomm BAM dma driver

Andy Shevchenko (5):
      acpi-dma: use devm_release() instead of devm_destroy()
      acpi-dma: convert to return error code when asked for channel
      dma: dw: add a PCI ID for Intel Haswell SoC
      dma: dw: remove leftovers in the comment blocks
      dma: dw: allocate memory in two stages in probe

Barry Song (1):
      dmaengine: sirf: enable generic dt binding for dma channels

Chao Xie (1):
      dma: mmp_pdma: add IRQF_SHARED when request irq

Chew, Chiau Ee (1):
      dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.

Christian Engelmayer (1):
      dma: edma: Fix memory leak in edma_prep_dma_cyclic()

Dan Carpenter (1):
      dmaengine: s3c24xx-dma: make phy->irq signed for error handling

George Cherian (2):
      usb: musb: musb_cppi41: Dont reprogram DMA if tear down is initiated
      dma: cppi41: start tear down only if channel is busy

Jerome Blin (1):
      Add new line to test result strings produced in verbose mode

Jingchang Lu (2):
      dma: Add Freescale eDMA engine driver support
      dma: fsl-edma: fix static checker warning of NULL dereference

Kuninori Morimoto (1):
      shdma: add R-Car Audio DMAC peri peri driver

Lars-Peter Clausen (1):
      dma: Remove comment about embedding dma_slave_config into custom structs

Laurent Pinchart (3):
      DMA: shdma: Fix warnings due to improper casts and printk formats
      DMA: shdma: Fix warnings due to declared but unused symbols
      DMA: shdma: Make sh_dmae_pm static

Nenghua Cao (1):
      dma: mmp_tdma: move to generic device tree binding

Paul Bolle (1):
      dmaengine: Remove dependency on MACH_BCM2708

Peter Ujfalusi (1):
      dma: omap-dma: Implement device_slave_caps callback

Vinod Koul (4):
      dmaengine: at_hdmac: use tasklet_kill in teardown
      dmaengine: pch_dma: use tasklet_kill in teardown
      Merge branch 'topic/tasklet_fix' into for-linus
      Merge branch 'topic/bam' into for-linus

 Documentation/devicetree/bindings/dma/fsl-edma.txt |   76 ++
 .../devicetree/bindings/dma/qcom_bam_dma.txt       |   41 +
 .../devicetree/bindings/dma/sirfsoc-dma.txt        |   43 +
 arch/arm/boot/dts/atlas6.dtsi                      |    2 +
 arch/arm/boot/dts/prima2.dtsi                      |    2 +
 drivers/dma/Kconfig                                |   21 +-
 drivers/dma/Makefile                               |    2 +
 drivers/dma/acpi-dma.c                             |   17 +-
 drivers/dma/at_hdmac.c                             |    1 -
 drivers/dma/cppi41.c                               |    7 +-
 drivers/dma/dmaengine.c                            |    9 +-
 drivers/dma/dmatest.c                              |    4 +-
 drivers/dma/dw/core.c                              |   21 +-
 drivers/dma/dw/pci.c                               |   36 +
 drivers/dma/dw/regs.h                              |    4 +-
 drivers/dma/edma.c                                 |    5 +-
 drivers/dma/fsl-edma.c                             |  975 +++++++++++++++++
 drivers/dma/imx-dma.c                              |   13 +-
 drivers/dma/mmp_pdma.c                             |    8 +-
 drivers/dma/mmp_tdma.c                             |   50 +
 drivers/dma/omap-dma.c                             |   18 +
 drivers/dma/pch_dma.c                              |    4 +-
 drivers/dma/qcom_bam_dma.c                         | 1111 ++++++++++++++++++++
 drivers/dma/s3c24xx-dma.c                          |    2 +-
 drivers/dma/sh/Kconfig                             |    6 +
 drivers/dma/sh/Makefile                            |    1 +
 drivers/dma/sh/rcar-audmapp.c                      |  320 ++++++
 drivers/dma/sh/shdma-base.c                        |   10 +-
 drivers/dma/sh/shdma-of.c                          |    3 +-
 drivers/dma/sh/shdmac.c                            |   13 +-
 drivers/dma/sh/sudmac.c                            |    4 +-
 drivers/dma/sirf-dma.c                             |   23 +
 drivers/usb/musb/musb_cppi41.c                     |    3 +-
 include/linux/acpi_dma.h                           |    5 +-
 include/linux/dmaengine.h                          |   14 +-
 include/linux/dw_dmac.h                            |    5 +-
 include/linux/platform_data/dma-rcar-audmapp.h     |   34 +
 37 files changed, 2839 insertions(+), 74 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/fsl-edma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/sirfsoc-dma.txt
 create mode 100644 drivers/dma/fsl-edma.c
 create mode 100644 drivers/dma/qcom_bam_dma.c
 create mode 100644 drivers/dma/sh/rcar-audmapp.c
 create mode 100644 include/linux/platform_data/dma-rcar-audmapp.h

Thanks
-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

             reply	other threads:[~2014-04-09 16:21 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-09 16:12 Vinod Koul [this message]
  -- strict thread matches above, loose matches on Subject: below --
2013-11-20  3:46 [GIT PULL] slave-dmaengine updates Vinod Koul
2013-07-07  4:17 Vinod Koul
2013-07-07 21:39 ` Linus Torvalds
2013-07-08  2:02   ` Vinod Koul
2013-05-08  2:47 Vinod Koul
2013-02-22  4:32 Vinod Koul
2012-01-16 15:06 Vinod Koul
2012-01-18  2:41 ` Linus Torvalds
2012-01-18 20:03   ` Vinod Koul
2011-10-31  4:40 Vinod Koul
2011-08-01 10:43 Koul, Vinod

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140409161202.GB9846@intel.com \
    --to=vinod.koul@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).