On Mon, May 30, 2016 at 10:26:21PM +0200, Bernhard Nortmann wrote: > Am 30.05.2016 um 21:43 schrieb Maxime Ripard: > >Hi, > > > >On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@gmail.com wrote: > >>From: luoyi > >> > >>Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn . > >>This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for > >>OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, > >>3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and sdio wifi. > >What is the difference between the M1+ and the M1? > > The M1+ is an updated version of the original Banana Pi. If you're > interested in the details, have a look at > http://linux-sunxi.org/Banana_Pi#Variants . "BPi-M1+" is SinoVoip's > counterpart of LeMaker's "Banana Pro", for which a .dts already > exists. Judging from .fex files, only a single pin assignment seems > to differ between the two (audio_pa_ctrl, PH26 vs. PH15). Gee, that's confusing :) I guess we should just include the banana pro DTB and change that pin (and the i2s pins Luo was mentionning). Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com