From: Andrew Jeffery <andrew@aj.id.au>
To: Linus Walleij <linus.walleij@linaro.org>, Joel Stanley <joel@jms.id.au>
Cc: Alexandre Courbot <gnurou@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Jeremy Kerr <jk@ozlabs.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Andrew Jeffery <andrew@aj.id.au>
Subject: [PATCH v3 0/8] aspeed: Add pinctrl and gpio drivers
Date: Tue, 30 Aug 2016 17:24:19 +0930 [thread overview]
Message-ID: <20160830075427.11493-1-andrew@aj.id.au> (raw)
Hi all,
Here's v3 of the Aspeed pinctrl and gpio driver patches, which aims to address
the review comments on v2:
https://lkml.org/lkml/2016/8/19/394
The combined series has been tested with both the AST2400 (g4) and AST2500 (g5)
SoCs on OpenPOWER Palmetto and Aspeed AST2500 EVB machines respectively, and
similarly in QEMU with the palmetto-bmc and ast2500-evb machines[1].
Since v2:
* Add interrupt-controller as a required property to gpio devicetree node
* Drop unit address in pinctrl devicetree example
* PINCTRL_ASPEED depends on MFD_SYSCON rather than selecting it
* Use regmap_update_bits() where possible
Since v1:
* Split the series in two: driver and SoC patches.
* Update devicetree bindings documentation
* Add documentation for aspeed pinctrl core functions
* Fix bugs in existing signal descriptors
* Add a number of pin and mux function declarations
* Provide debug information on unexpected conditions
Cheers,
Andrew
[1] https://lists.gnu.org/archive/html/qemu-arm/2016-08/msg00019.html
---
Andrew Jeffery (7):
MAINTAINERS: Add glob for Aspeed devicetree bindings
syscon: dt-bindings: Add documentation for Aspeed system control units
pinctrl: dt-bindings: Add documentation for Aspeed pin controllers
gpio: dt-bindings: Add documentation for Aspeed GPIO controllers
pinctrl: Add core support for Aspeed SoCs
pinctrl: Add pinctrl-aspeed-g4 driver
pinctrl: Add pinctrl-aspeed-g5 driver
Joel Stanley (1):
gpio: Add Aspeed driver
.../devicetree/bindings/gpio/gpio-aspeed.txt | 36 +
.../devicetree/bindings/mfd/aspeed-scu.txt | 18 +
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 65 ++
MAINTAINERS | 2 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-aspeed.c | 457 ++++++++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/aspeed/Kconfig | 24 +
drivers/pinctrl/aspeed/Makefile | 6 +
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1231 ++++++++++++++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 808 +++++++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 498 ++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 569 +++++++++
15 files changed, 3724 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-scu.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
create mode 100644 drivers/gpio/gpio-aspeed.c
create mode 100644 drivers/pinctrl/aspeed/Kconfig
create mode 100644 drivers/pinctrl/aspeed/Makefile
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed.c
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed.h
--
2.9.3.1.g0db844e
next reply other threads:[~2016-08-30 7:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 7:54 Andrew Jeffery [this message]
2016-08-30 7:54 ` [PATCH v3 1/8] MAINTAINERS: Add glob for Aspeed devicetree bindings Andrew Jeffery
2016-09-07 14:37 ` Linus Walleij
2016-09-07 14:42 ` Arnd Bergmann
2016-08-30 7:54 ` [PATCH v3 2/8] syscon: dt-bindings: Add documentation for Aspeed system control units Andrew Jeffery
2016-09-07 14:38 ` Linus Walleij
2016-09-07 16:30 ` Lee Jones
2016-09-08 1:03 ` Andrew Jeffery
2016-09-08 1:01 ` Andrew Jeffery
2016-09-08 7:01 ` Lee Jones
2016-08-30 7:54 ` [PATCH v3 3/8] pinctrl: dt-bindings: Add documentation for Aspeed pin controllers Andrew Jeffery
2016-09-07 14:40 ` Linus Walleij
2016-08-30 7:54 ` [PATCH v3 4/8] gpio: dt-bindings: Add documentation for Aspeed GPIO controllers Andrew Jeffery
2016-09-02 15:00 ` Rob Herring
2016-09-07 14:43 ` Linus Walleij
2016-09-08 1:19 ` Andrew Jeffery
2016-08-30 7:54 ` [PATCH v3 5/8] pinctrl: Add core support for Aspeed SoCs Andrew Jeffery
2016-09-07 14:50 ` Linus Walleij
2016-09-08 3:58 ` Andrew Jeffery
2016-08-30 7:54 ` [PATCH v3 6/8] pinctrl: Add pinctrl-aspeed-g4 driver Andrew Jeffery
2016-09-07 14:53 ` Linus Walleij
2016-08-30 7:54 ` [PATCH v3 7/8] pinctrl: Add pinctrl-aspeed-g5 driver Andrew Jeffery
2016-09-07 14:54 ` Linus Walleij
2016-08-30 7:54 ` [PATCH v3 8/8] gpio: Add Aspeed driver Andrew Jeffery
2016-09-07 14:59 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160830075427.11493-1-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).