linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Weiner <hannes@cmpxchg.org>
To: Shaohua Li <shli@fb.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Kernel-team@fb.com, mhocko@suse.com, minchan@kernel.org,
	hughd@google.com, riel@redhat.com, mgorman@techsingularity.net,
	akpm@linux-foundation.org
Subject: Re: [PATCH V3 3/7] mm: reclaim MADV_FREE pages
Date: Thu, 16 Feb 2017 13:40:18 -0500	[thread overview]
Message-ID: <20170216184018.GC20791@cmpxchg.org> (raw)
In-Reply-To: <cd6a477063c40ad899ad8f4e964c347525ea23a3.1487100204.git.shli@fb.com>

On Tue, Feb 14, 2017 at 11:36:09AM -0800, Shaohua Li wrote:
> @@ -1419,11 +1419,18 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
>  			VM_BUG_ON_PAGE(!PageSwapCache(page) && PageSwapBacked(page),
>  				page);
>  
> -			if (!PageDirty(page) && (flags & TTU_LZFREE)) {
> -				/* It's a freeable page by MADV_FREE */
> -				dec_mm_counter(mm, MM_ANONPAGES);
> -				rp->lazyfreed++;
> -				goto discard;
> +			if (flags & TTU_LZFREE) {
> +				if (!PageDirty(page)) {
> +					/* It's a freeable page by MADV_FREE */
> +					dec_mm_counter(mm, MM_ANONPAGES);
> +					rp->lazyfreed++;
> +					goto discard;
> +				} else {
> +					set_pte_at(mm, address, pvmw.pte, pteval);
> +					ret = SWAP_FAIL;
> +					page_vma_mapped_walk_done(&pvmw);
> +					break;
> +				}

I don't understand why we need the TTU_LZFREE bit in general. More on
that below at the callsite.

> @@ -911,7 +911,7 @@ static void page_check_dirty_writeback(struct page *page,
>  	 * Anonymous pages are not handled by flushers and must be written
>  	 * from reclaim context. Do not stall reclaim based on them
>  	 */
> -	if (!page_is_file_cache(page)) {
> +	if (!page_is_file_cache(page) || page_is_lazyfree(page)) {

Do we need this? MADV_FREE clears the dirty bit off the page; we could
just let them go through with the function without any special-casing.

> @@ -986,6 +986,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  
>  		sc->nr_scanned++;
>  
> +		lazyfree = page_is_lazyfree(page);
> +
>  		if (unlikely(!page_evictable(page)))
>  			goto cull_mlocked;
>  
> @@ -993,7 +995,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  			goto keep_locked;
>  
>  		/* Double the slab pressure for mapped and swapcache pages */
> -		if (page_mapped(page) || PageSwapCache(page))
> +		if ((page_mapped(page) || PageSwapCache(page)) && !lazyfree)
>  			sc->nr_scanned++;
>  
>  		may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
> @@ -1119,13 +1121,13 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  		/*
>  		 * Anonymous process memory has backing store?
>  		 * Try to allocate it some swap space here.
> +		 * Lazyfree page could be freed directly
>  		 */
> -		if (PageAnon(page) && !PageSwapCache(page)) {
> +		if (PageAnon(page) && !PageSwapCache(page) && !lazyfree) {

lazyfree duplicates the anon check. As per the previous email, IMO it
would be much preferable to get rid of that "lazyfree" obscuring here.

This would simply be:

		if (PageAnon(page) && PageSwapBacked && !PageSwapCache)

> @@ -1142,7 +1144,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  		 * The page is mapped into the page tables of one or more
>  		 * processes. Try to unmap it here.
>  		 */
> -		if (page_mapped(page) && mapping) {
> +		if (page_mapped(page) && (mapping || lazyfree)) {

Do we actually need to filter for mapping || lazyfree? If we fail to
allocate swap, we don't reach here. If the page is a truncated file
page, ttu returns pretty much instantly with SWAP_AGAIN. We should be
able to just check for page_mapped() alone, no?

>  			switch (ret = try_to_unmap(page, lazyfree ?
>  				(ttu_flags | TTU_BATCH_FLUSH | TTU_LZFREE) :
>  				(ttu_flags | TTU_BATCH_FLUSH))) {

That bit I don't understand. Why do we need to pass TTU_LZFREE? What
information does that carry that cannot be gathered from inside ttu?

I.e. when ttu runs into PageAnon, can it simply check !PageSwapBacked?
And if it's still clean, it can lazyfreed++; goto discard.

Am I overlooking something?

> @@ -1154,7 +1156,14 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  			case SWAP_MLOCK:
>  				goto cull_mlocked;
>  			case SWAP_LZFREE:
> -				goto lazyfree;
> +				/* follow __remove_mapping for reference */
> +				if (page_ref_freeze(page, 1)) {
> +					if (!PageDirty(page))
> +						goto lazyfree;
> +					else
> +						page_ref_unfreeze(page, 1);
> +				}
> +				goto keep_locked;
>  			case SWAP_SUCCESS:
>  				; /* try to free the page below */

This is a similar situation.

Can we let the page go through the regular __remove_mapping() process
and simply have that function check for PageAnon && !PageSwapBacked?

> @@ -1266,10 +1275,9 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  			}
>  		}
>  
> -lazyfree:
>  		if (!mapping || !__remove_mapping(mapping, page, true))
>  			goto keep_locked;
> -
> +lazyfree:

... eliminating this special casing.

> @@ -1294,6 +1302,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  cull_mlocked:
>  		if (PageSwapCache(page))
>  			try_to_free_swap(page);
> +		if (lazyfree)
> +			clear_page_lazyfree(page);

Why cancel the MADV_FREE state? The combination seems non-sensical,
but we can simply retain the invalidated state while the page goes to
the unevictable list; munlock should move it back to inactive_file.

>  		unlock_page(page);
>  		list_add(&page->lru, &ret_pages);
>  		continue;
> @@ -1303,6 +1313,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  		if (PageSwapCache(page) && mem_cgroup_swap_full(page))
>  			try_to_free_swap(page);
>  		VM_BUG_ON_PAGE(PageActive(page), page);
> +		if (lazyfree)
> +			clear_page_lazyfree(page);

This is similar too.

Can we leave simply leave the page alone here? The only way we get to
this point is if somebody is reading the invalidated page. It's weird
for a lazyfreed page to become active, but it doesn't seem to warrant
active intervention here.

  reply	other threads:[~2017-02-16 18:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-14 19:36 [PATCH V3 0/7] mm: fix some MADV_FREE issues Shaohua Li
2017-02-14 19:36 ` [PATCH V3 1/7] mm: don't assume anonymous pages have SwapBacked flag Shaohua Li
2017-02-16 17:39   ` Johannes Weiner
2017-02-14 19:36 ` [PATCH V3 2/7] mm: move MADV_FREE pages into LRU_INACTIVE_FILE list Shaohua Li
2017-02-16 17:52   ` Johannes Weiner
2017-02-17  0:35     ` Shaohua Li
2017-02-17 16:22       ` Johannes Weiner
2017-02-14 19:36 ` [PATCH V3 3/7] mm: reclaim MADV_FREE pages Shaohua Li
2017-02-16 18:40   ` Johannes Weiner [this message]
2017-02-17  0:27     ` Shaohua Li
2017-02-17  5:45       ` Minchan Kim
2017-02-17 16:11         ` Johannes Weiner
2017-02-17 16:01       ` Johannes Weiner
2017-02-17 18:43         ` Shaohua Li
2017-02-17 20:03           ` Johannes Weiner
2017-02-17  5:41     ` Minchan Kim
2017-02-17  9:27       ` Minchan Kim
2017-02-17 16:15       ` Johannes Weiner
2017-02-14 19:36 ` [PATCH V3 4/7] mm: enable MADV_FREE for swapless system Shaohua Li
2017-02-17 16:16   ` Johannes Weiner
2017-02-14 19:36 ` [PATCH V3 5/7] mm: add vmstat account for MADV_FREE pages Shaohua Li
2017-02-14 19:36 ` [PATCH V3 6/7] proc: show MADV_FREE pages info in smaps Shaohua Li
2017-02-14 19:36 ` [PATCH V3 7/7] mm: add a separate RSS for MADV_FREE pages Shaohua Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170216184018.GC20791@cmpxchg.org \
    --to=hannes@cmpxchg.org \
    --cc=Kernel-team@fb.com \
    --cc=akpm@linux-foundation.org \
    --cc=hughd@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=riel@redhat.com \
    --cc=shli@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).