linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 12/13] MIPS: defconfigs: add a defconfig for Microsemi SoCs
Date: Tue, 28 Nov 2017 16:26:42 +0100	[thread overview]
Message-ID: <20171128152643.20463-13-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20171128152643.20463-1-alexandre.belloni@free-electrons.com>

Add a defconfg that reaches userspace for Microsemi Ocelot.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/mips/configs/mscc_defconfig | 84 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 arch/mips/configs/mscc_defconfig

diff --git a/arch/mips/configs/mscc_defconfig b/arch/mips/configs/mscc_defconfig
new file mode 100644
index 000000000000..58cf09b1ae82
--- /dev/null
+++ b/arch/mips/configs/mscc_defconfig
@@ -0,0 +1,84 @@
+CONFIG_MSCC_OCELOT=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_ELF_APPENDED_DTB=y
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_SWAP is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SHMEM is not set
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SWITCHDEV=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_MICROSEMI_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_N_GSM=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_OCELOT_RESET=y
+CONFIG_SENSORS_TMP401=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_OVERLAY_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_HW is not set
-- 
2.15.0

  parent reply	other threads:[~2017-11-28 15:29 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-28 15:26 [PATCH 00/13] MIPS: add support for the Microsemi MIPS SoCs Alexandre Belloni
2017-11-28 15:26 ` [PATCH 01/13] dt-bindings: Add vendor prefix for Microsemi Corporation Alexandre Belloni
2017-11-28 16:10   ` James Hogan
2017-11-28 16:22     ` Alexandre Belloni
2017-12-01  1:14       ` Rob Herring
2017-11-28 15:26 ` [PATCH 02/13] dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller Alexandre Belloni
2017-12-01  1:15   ` Rob Herring
2017-11-28 15:26 ` [PATCH 03/13] irqchip: Add a driver for the Microsemi Ocelot controller Alexandre Belloni
2017-11-28 15:26 ` [PATCH 04/13] dt-bindings: pinctrl: Add bindings for Microsemi Ocelot Alexandre Belloni
2017-12-01  1:16   ` Rob Herring
2017-11-28 15:26 ` [PATCH 05/13] pinctrl: Add Microsemi Ocelot SoC driver Alexandre Belloni
2017-11-28 15:26 ` [PATCH 06/13] dt-bindings: power: reset: Document ocelot-reset binding Alexandre Belloni
2017-12-01  1:54   ` Rob Herring
2017-11-28 15:26 ` [PATCH 07/13] power: reset: Add a driver for the Microsemi Ocelot reset Alexandre Belloni
2017-11-28 15:26 ` [PATCH 08/13] dt-bindings: mips: Add bindings for Microsemi SoCs Alexandre Belloni
2017-11-28 19:14   ` Florian Fainelli
2017-11-28 15:26 ` [PATCH 09/13] MIPS: mscc: Add initial support for Microsemi MIPS SoCs Alexandre Belloni
2017-11-28 16:01   ` James Hogan
2017-11-28 16:53     ` Alexandre Belloni
2017-11-28 17:31       ` James Hogan
2017-11-28 19:50         ` Paul Burton
2017-11-29 16:38           ` Alexandre Belloni
2018-01-17 23:58             ` James Hogan
2018-03-02 15:22               ` Alexandre Belloni
2017-11-28 15:26 ` [PATCH 10/13] MIPS: mscc: add ocelot dtsi Alexandre Belloni
2017-11-28 18:40   ` Florian Fainelli
2017-11-28 15:26 ` [PATCH 11/13] MIPS: mscc: add ocelot PCB123 device tree Alexandre Belloni
2017-11-28 15:26 ` Alexandre Belloni [this message]
2017-11-28 15:26 ` [PATCH 13/13] MAINTAINERS: Add entry for Microsemi MIPS SoCs Alexandre Belloni
2017-11-28 15:34   ` Joe Perches
2017-11-28 15:44     ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171128152643.20463-13-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).