From: Andy Lutomirski Historically, IDT entries from usermode have always gone directly to the running task's kernel stack. Rearrange it so that we enter on a per-CPU trampoline stack and then manually switch to the task's stack. This touches a couple of extra cachelines, but it gives us a chance to run some code before we touch the kernel stack. The asm isn't exactly beautiful, but I think that fully refactoring it can wait. Signed-off-by: Andy Lutomirski Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Reviewed-by: Borislav Petkov Reviewed-by: Thomas Gleixner Cc: Rik van Riel Cc: Denys Vlasenko Cc: Peter Zijlstra Cc: Brian Gerst Cc: Dave Hansen Cc: Josh Poimboeuf Cc: Linus Torvalds Link: https://lkml.kernel.org/r/fa3958723a1a85baeaf309c735b775841205800e.1511497875.git.luto@kernel.org --- arch/x86/entry/entry_64.S | 67 +++++++++++++++++++++++++++++---------- arch/x86/entry/entry_64_compat.S | 5 ++ arch/x86/include/asm/switch_to.h | 3 - arch/x86/include/asm/traps.h | 1 arch/x86/kernel/cpu/common.c | 6 ++- arch/x86/kernel/traps.c | 12 +++--- 6 files changed, 65 insertions(+), 29 deletions(-) --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -564,6 +564,13 @@ END(irq_entries_start) /* 0(%rsp): ~(interrupt number) */ .macro interrupt func cld + + testb $3, CS-ORIG_RAX(%rsp) + jz 1f + SWAPGS + call switch_to_thread_stack +1: + ALLOC_PT_GPREGS_ON_STACK SAVE_C_REGS SAVE_EXTRA_REGS @@ -573,12 +580,8 @@ END(irq_entries_start) jz 1f /* - * IRQ from user mode. Switch to kernel gsbase and inform context - * tracking that we're in kernel mode. - */ - SWAPGS - - /* + * IRQ from user mode. + * * We need to tell lockdep that IRQs are off. We can't do this until * we fix gsbase, and we should do it before enter_from_user_mode * (which can take locks). Since TRACE_IRQS_OFF idempotent, @@ -832,6 +835,32 @@ apicinterrupt IRQ_WORK_VECTOR irq_work */ #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8) +/* + * Switch to the thread stack. This is called with the IRET frame and + * orig_ax on the stack. (That is, RDI..R12 are not on the stack and + * space has not been allocated for them.) + */ +ENTRY(switch_to_thread_stack) + UNWIND_HINT_FUNC + + pushq %rdi + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI + + pushq 7*8(%rdi) /* regs->ss */ + pushq 6*8(%rdi) /* regs->rsp */ + pushq 5*8(%rdi) /* regs->eflags */ + pushq 4*8(%rdi) /* regs->cs */ + pushq 3*8(%rdi) /* regs->ip */ + pushq 2*8(%rdi) /* regs->orig_ax */ + pushq 8(%rdi) /* return address */ + UNWIND_HINT_FUNC + + movq (%rdi), %rdi + ret +END(switch_to_thread_stack) + .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ENTRY(\sym) UNWIND_HINT_IRET_REGS offset=\has_error_code*8 @@ -849,11 +878,12 @@ ENTRY(\sym) ALLOC_PT_GPREGS_ON_STACK - .if \paranoid - .if \paranoid == 1 + .if \paranoid < 2 testb $3, CS(%rsp) /* If coming from userspace, switch stacks */ - jnz 1f + jnz .Lfrom_usermode_switch_stack_\@ .endif + + .if \paranoid call paranoid_entry .else call error_entry @@ -895,20 +925,15 @@ ENTRY(\sym) jmp error_exit .endif - .if \paranoid == 1 + .if \paranoid < 2 /* - * Paranoid entry from userspace. Switch stacks and treat it + * Entry from userspace. Switch stacks and treat it * as a normal entry. This means that paranoid handlers * run in real process context if user_mode(regs). */ -1: +.Lfrom_usermode_switch_stack_\@: call error_entry - - movq %rsp, %rdi /* pt_regs pointer */ - call sync_regs - movq %rax, %rsp /* switch stack */ - movq %rsp, %rdi /* pt_regs pointer */ .if \has_error_code @@ -1171,6 +1196,14 @@ ENTRY(error_entry) SWAPGS .Lerror_entry_from_usermode_after_swapgs: + /* Put us onto the real thread stack. */ + popq %r12 /* save return addr in %12 */ + movq %rsp, %rdi /* arg0 = pt_regs pointer */ + call sync_regs + movq %rax, %rsp /* switch stack */ + ENCODE_FRAME_POINTER + pushq %r12 + /* * We need to tell lockdep that IRQs are off. We can't do this until * we fix gsbase, and we should do it before enter_from_user_mode --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -306,8 +306,11 @@ ENTRY(entry_INT80_compat) */ movl %eax, %eax - /* Construct struct pt_regs on stack (iret frame is already on stack) */ pushq %rax /* pt_regs->orig_ax */ + + /* switch to thread stack expects orig_ax to be pushed */ + call switch_to_thread_stack + pushq %rdi /* pt_regs->di */ pushq %rsi /* pt_regs->si */ pushq %rdx /* pt_regs->dx */ --- a/arch/x86/include/asm/switch_to.h +++ b/arch/x86/include/asm/switch_to.h @@ -90,10 +90,9 @@ static inline void refresh_sysenter_cs(s /* This is used when switching tasks or entering/exiting vm86 mode. */ static inline void update_sp0(struct task_struct *task) { + /* On x86_64, sp0 always points to the entry trampoline stack, which is constant: */ #ifdef CONFIG_X86_32 load_sp0(task->thread.sp0); -#else - load_sp0(task_top_of_stack(task)); #endif } --- a/arch/x86/include/asm/traps.h +++ b/arch/x86/include/asm/traps.h @@ -75,7 +75,6 @@ dotraplinkage void do_segment_not_presen dotraplinkage void do_stack_segment(struct pt_regs *, long); #ifdef CONFIG_X86_64 dotraplinkage void do_double_fault(struct pt_regs *, long); -asmlinkage struct pt_regs *sync_regs(struct pt_regs *); #endif dotraplinkage void do_general_protection(struct pt_regs *, long); dotraplinkage void do_page_fault(struct pt_regs *, unsigned long); --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1648,11 +1648,13 @@ void cpu_init(void) setup_cpu_entry_area(cpu); /* - * Initialize the TSS. Don't bother initializing sp0, as the initial - * task never enters user mode. + * Initialize the TSS. sp0 points to the entry trampoline stack + * regardless of what task is running. */ set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss); load_TR_desc(); + load_sp0((unsigned long)&get_cpu_entry_area(cpu)->tss + + offsetofend(struct tss_struct, SYSENTER_stack)); load_mm_ldt(&init_mm); --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -631,7 +631,7 @@ NOKPROBE_SYMBOL(do_int3); */ asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs) { - struct pt_regs *regs = task_pt_regs(current); + struct pt_regs *regs = (struct pt_regs *)this_cpu_read(cpu_current_top_of_stack) - 1; *regs = *eregs; return regs; } @@ -648,13 +648,13 @@ struct bad_iret_stack *fixup_bad_iret(st /* * This is called from entry_64.S early in handling a fault * caused by a bad iret to user mode. To handle the fault - * correctly, we want move our stack frame to task_pt_regs - * and we want to pretend that the exception came from the - * iret target. + * correctly, we want to move our stack frame to where it would + * be had we entered directly on the entry stack (rather than + * just below the IRET frame) and we want to pretend that the + * exception came from the IRET target. */ struct bad_iret_stack *new_stack = - container_of(task_pt_regs(current), - struct bad_iret_stack, regs); + (struct bad_iret_stack *)this_cpu_read(cpu_tss.x86_tss.sp0) - 1; /* Copy the IRET target to the new stack. */ memmove(&new_stack->regs.ip, (void *)s->regs.sp, 5*8);