From: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Hugh Dickins <hughd@google.com>,
linux-kernel@vger.kernel.org
Subject: Re: "BUG: using smp_processor_id() in preemptible" with KPTI on 4.14.11
Date: Thu, 4 Jan 2018 16:25:16 +0100 [thread overview]
Message-ID: <20180104152516.3sql2ayoemlephig@toau> (raw)
In-Reply-To: <20180104125528.GA15548@kroah.com>
On Thu, Jan 04, 2018 at 01:55:28PM +0100, Greg Kroah-Hartman wrote:
> On Thu, Jan 04, 2018 at 01:43:20PM +0100, Thomas Zeitlhofer wrote:
> > On Thu, Jan 04, 2018 at 11:51:11AM +0100, Greg Kroah-Hartman wrote:
> > > On Thu, Jan 04, 2018 at 11:20:29AM +0100, Thomas Zeitlhofer wrote:
> > > > On Thu, Jan 04, 2018 at 02:59:06AM +0100, Thomas Zeitlhofer wrote:
> > > > > Hello,
> > > > >
> > > > > on an Ivybridge CPU, I get with 4.14.11:
> > > > >
> > > > > BUG: using smp_processor_id() in preemptible [00000000] code: ovsdb-server/4510
> > > > > caller is native_flush_tlb_single+0x57/0xc0
> > > > > CPU: 3 PID: 4510 Comm: ovsdb-server Not tainted 4.14.11-kvm-00434-gcd0b8eb84f5c #3
> > > > > Hardware name: MSI MS-7798/B75MA-P45 (MS-7798), BIOS V1.9 09/30/2013
> > > > > Call Trace:
> > > > > dump_stack+0x5c/0x86
> > > > > check_preemption_disabled+0xdd/0xe0
> > > > > native_flush_tlb_single+0x57/0xc0
> > > > > ? __set_pte_vaddr+0x2d/0x40
> > > > > __set_pte_vaddr+0x2d/0x40
> > > > > set_pte_vaddr+0x2f/0x40
> > > > > cea_set_pte+0x30/0x40
> > > > > ds_update_cea.constprop.4+0x4d/0x70
> > > > > reserve_ds_buffers+0x159/0x410
> > > > > ? wp_page_copy+0x36d/0x6a0
> > > > > x86_reserve_hardware+0x150/0x160
> > > > > x86_pmu_event_init+0x3e/0x1f0
> > > > > perf_try_init_event+0x69/0x80
> > > > > perf_event_alloc+0x652/0x740
> > > > > SyS_perf_event_open+0x3f6/0xd60
> > > > > do_syscall_64+0x5c/0x190
> > > > > entry_SYSCALL64_slow_path+0x25/0x25
> > > > > RIP: 0033:0x74a1d94580b9
> > > > > RSP: 002b:00007fff0c01d5d8 EFLAGS: 00000206 ORIG_RAX: 000000000000012a
> > > > > RAX: ffffffffffffffda RBX: 00007fff0c01d7b0 RCX: 000074a1d94580b9
> > > > > RDX: 00000000ffffffff RSI: 0000000000000000 RDI: 00007fff0c01d5e0
> > > > > RBP: 0000000000000000 R08: 0000000000000000 R09: 0000007000000000
> > > > > R10: 00000000ffffffff R11: 0000000000000206 R12: 0000000000000008
> > > > > R13: 0000000000000000 R14: 00007fff0c01d790 R15: 00005df43a799600
> > > > >
> > > > > This does not show up when booting with pti=off.
> > > > >
> > > > > Maybe it is related to the issue that is fixed for the upcoming 4.4.110
> > > > > release by https://lkml.org/lkml/2018/1/3/692
> > >
> > > I don't understand this link.
> >
> > I found that link when trying to search for the error message. That
> > patch touches __native_flush_tlb_single() and mentions hardware
> > differences in Ivybridge and below:
> >
> > "We have many machines (Westmere, Sandybridge, Ivybridge)
> > supporting PCID but not INVPCID..."
> >
> > As I see the error message only on Ivybridge and not on Haswell, I came
> > up with the vague guess that this could be related.
> >
> > > The 4.4 and 4.9 backports are much different than the 4.14 tree.
> >
> > Yes, I have seen that.
> >
> > > > JFYI, the very same kernel does not show this issue on a Haswell CPU.
> > >
> > > I have now queued up a bunch of patches that are in Linus's tree, can
> > > you test these out as well:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tree/queue-4.14
> >
> > Does not seem to make any difference - with those patches applied I
> > still get:
> >
> > BUG: using smp_processor_id() in preemptible [00000000] code: ovsdb-server/4383
> > caller is native_flush_tlb_single+0x57/0xc0
> > CPU: 3 PID: 4383 Comm: ovsdb-server Not tainted 4.14.11-kvm-00435-g3138001170c9 #3
> > Hardware name: MSI MS-7798/B75MA-P45 (MS-7798), BIOS V1.9 09/30/2013
> > Call Trace:
> > dump_stack+0x5c/0x86
> > check_preemption_disabled+0xdd/0xe0
> > native_flush_tlb_single+0x57/0xc0
> > ? __set_pte_vaddr+0x2d/0x40
> > __set_pte_vaddr+0x2d/0x40
> > set_pte_vaddr+0x2f/0x40
> > cea_set_pte+0x30/0x40
> > ds_update_cea.constprop.4+0x4d/0x70
> > reserve_ds_buffers+0x159/0x410
> > ? wp_page_copy+0x36d/0x6a0
> > x86_reserve_hardware+0x150/0x160
> > x86_pmu_event_init+0x3e/0x1f0
> > perf_try_init_event+0x69/0x80
> > perf_event_alloc+0x652/0x740
> > SyS_perf_event_open+0x3f6/0xd60
> > do_syscall_64+0x5c/0x190
> > entry_SYSCALL64_slow_path+0x25/0x25
> > RIP: 0033:0x755c0b8580b9
> > RSP: 002b:00007fffc87cf9e8 EFLAGS: 00000206 ORIG_RAX: 000000000000012a
> > RAX: ffffffffffffffda RBX: 00007fffc87cfbc0 RCX: 0000755c0b8580b9
> > RDX: 00000000ffffffff RSI: 0000000000000000 RDI: 00007fffc87cf9f0
> > RBP: 0000000000000000 R08: 0000000000000000 R09: 0000007000000000
> > R10: 00000000ffffffff R11: 0000000000000206 R12: 0000000000000008
> > R13: 0000000000000000 R14: 00007fffc87cfba0 R15: 000062ea2cbff600
> >
>
> Odd, does 4.15-rc6 also trigger the same error?
Yes:
BUG: using smp_processor_id() in preemptible [00000000] code: ovsdb-server/4498
caller is native_flush_tlb_single+0x57/0xc0
CPU: 2 PID: 4498 Comm: ovsdb-server Not tainted 4.15.0-rc6-kvm-00423-gea1908c252eb #3
Hardware name: MSI MS-7798/B75MA-P45 (MS-7798), BIOS V1.9 09/30/2013
Call Trace:
dump_stack+0x5c/0x86
check_preemption_disabled+0xdd/0xe0
native_flush_tlb_single+0x57/0xc0
? __set_pte_vaddr+0x2d/0x40
__set_pte_vaddr+0x2d/0x40
set_pte_vaddr+0x2f/0x40
cea_set_pte+0x30/0x40
ds_update_cea.constprop.4+0x4d/0x70
reserve_ds_buffers+0x159/0x410
? wp_page_copy+0x370/0x6c0
x86_reserve_hardware+0x150/0x160
x86_pmu_event_init+0x3e/0x1f0
perf_try_init_event+0x69/0x80
perf_event_alloc+0x652/0x740
SyS_perf_event_open+0x3f6/0xd60
do_syscall_64+0x5c/0x190
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x72bff0a3c0b9
RSP: 002b:00007ffed11c2f18 EFLAGS: 00000206 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 00007ffed11c30f0 RCX: 000072bff0a3c0b9
RDX: 00000000ffffffff RSI: 0000000000000000 RDI: 00007ffed11c2f20
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000007000000000
R10: 00000000ffffffff R11: 0000000000000206 R12: 0000000000000008
R13: 0000000000000000 R14: 00007ffed11c30d0 R15: 000060986ecfb600
device ovs-system entered promiscuous mode
netlink: 'ovs-vswitchd': attribute type 5 has an invalid length.
In addition, with v4.15-rc6, netlink messages like in the last line show
up, but I guess this is a different openvswitch related issue.
> Thomas is working on an
> issue with KALSR (see lkml with:
> Subject: Re: "bad pmd" errors + oops with KPTI on 4.14.11 after loading X.509 certs
> )
Yes, I have also seen that thread, but I did not see any similarities to
my issue. Anyway, I also tried out the patch proposed in
https://lkml.org/lkml/2018/1/4/313 but it does not change anything here.
Thanks,
Thomas
next prev parent reply other threads:[~2018-01-04 15:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-04 1:59 "BUG: using smp_processor_id() in preemptible" with KPTI on 4.14.11 Thomas Zeitlhofer
2018-01-04 10:20 ` Thomas Zeitlhofer
2018-01-04 10:51 ` Greg Kroah-Hartman
2018-01-04 12:43 ` Thomas Zeitlhofer
2018-01-04 12:55 ` Greg Kroah-Hartman
2018-01-04 15:25 ` Thomas Zeitlhofer [this message]
2018-01-04 15:37 ` Thomas Gleixner
2018-01-04 17:07 ` Peter Zijlstra
2018-01-04 18:38 ` Thomas Zeitlhofer
2018-01-06 21:38 ` Thomas Zeitlhofer
2018-01-07 8:17 ` Greg Kroah-Hartman
2018-01-07 8:53 ` Thomas Zeitlhofer
2018-01-08 0:37 ` Thomas Zeitlhofer
2018-01-04 22:11 ` [tip:x86/pti] x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers tip-bot for Peter Zijlstra
2018-01-04 23:49 ` tip-bot for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180104152516.3sql2ayoemlephig@toau \
--to=thomas.zeitlhofer+lkml@ze-it.at \
--cc=gregkh@linuxfoundation.org \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).