linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Petr Mladek <pmladek@suse.com>
To: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>,
	Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
	linux-kernel@vger.kernel.org, Tejun Heo <tj@kernel.org>,
	Petr Mladek <pmladek@suse.com>
Subject: [PATCH v2] printk: Relocate wake_klogd check close to the end of console_unlock()
Date: Thu,  8 Feb 2018 14:04:02 +0100	[thread overview]
Message-ID: <20180208130402.15157-1-pmladek@suse.com> (raw)

From: Tejun Heo <tj@kernel.org>

We mark for waking up klogd whenever we see a new message sequence in
the main loop.  However, the actual wakeup is always at the end of the
function and we can easily test for the wakeup condition when we do
the final should-we-repeat check.

Move the wake_klogd condition check out of the main loop.  This avoids
doing the same thing repeatedly and groups similar checks into a
common place.

This fixes a race introduced by the commit dbdda842fe96f8932 ("printk: Add
console owner and waiter logic to load balance console writes").
The current console owner might process the newly added message before
the related printk() start waiting for the console lock. Then the lock
is passed without waking klogd. The new owner sees the already updated
seen_seq and does not know that the wakeup is needed.

Fixes: dbdda842fe96f8932 ("printk: Add console owner and waiter logic to load balance console writes")
Signed-off-by: Tejun Heo <tj@kernel.org>
[pmladek@suse.com: Describe the new race with console waiter]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
---
The patch [1] was lost in the discussions about the solution
of printk softlockups. I make sense on its own.

Important: It actually fixes a race caused by the new console waiter
logic. This is why I resend it with an updated commit message.

[1] https://lkml.kernel.org/r/20171102135146.GN3252168@devbig577.frc2.facebook.com


 kernel/printk/printk.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index db4b9b8929eb..2682209b1c90 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2335,10 +2335,6 @@ void console_unlock(void)
 
 		printk_safe_enter_irqsave(flags);
 		raw_spin_lock(&logbuf_lock);
-		if (seen_seq != log_next_seq) {
-			wake_klogd = true;
-			seen_seq = log_next_seq;
-		}
 
 		if (console_seq < log_first_seq) {
 			len = sprintf(text, "** %u printk messages dropped **\n",
@@ -2417,12 +2413,17 @@ void console_unlock(void)
 	up_console_sem();
 
 	/*
-	 * Someone could have filled up the buffer again, so re-check if there's
-	 * something to flush. In case we cannot trylock the console_sem again,
-	 * there's a new owner and the console_unlock() from them will do the
-	 * flush, no worries.
+	 * Check whether userland needs notification.  Also, someone could
+	 * have filled up the buffer again, so re-check if there's
+	 * something to flush. In case we cannot trylock the console_sem
+	 * again, there's a new owner and the console_unlock() from them
+	 * will do the flush, no worries.
 	 */
 	raw_spin_lock(&logbuf_lock);
+	if (seen_seq != log_next_seq) {
+		wake_klogd = true;
+		seen_seq = log_next_seq;
+	}
 	retry = console_seq != log_next_seq;
 	raw_spin_unlock(&logbuf_lock);
 	printk_safe_exit_irqrestore(flags);
-- 
2.13.6

             reply	other threads:[~2018-02-08 13:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-08 13:04 Petr Mladek [this message]
2018-02-08 14:53 ` [PATCH v2] printk: Relocate wake_klogd check close to the end of console_unlock() Sergey Senozhatsky
2018-02-08 16:48   ` Petr Mladek
2018-02-09  3:28     ` Sergey Senozhatsky
2018-02-09 10:39       ` Petr Mladek
2018-02-10  7:33         ` Sergey Senozhatsky
2018-02-09 10:47       ` Petr Mladek
2018-02-19 15:58 ` Petr Mladek
2018-02-19 16:01   ` [PATCH v3] " Petr Mladek
2018-02-26  6:37     ` Sergey Senozhatsky
2018-02-26 15:57       ` Petr Mladek
2018-02-26 16:01         ` Sergey Senozhatsky
2018-02-26  6:27   ` [PATCH v2] " Sergey Senozhatsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180208130402.15157-1-pmladek@suse.com \
    --to=pmladek@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=sergey.senozhatsky.work@gmail.com \
    --cc=sergey.senozhatsky@gmail.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).