linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
	Kieran Bingham <kieran.bingham@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 3/3] media: i2c: adv748x: Add support for i2c_new_secondary_device
Date: Thu, 1 Mar 2018 16:56:03 +0100	[thread overview]
Message-ID: <20180301155603.GE19122@bigcity.dyn.berto.se> (raw)
In-Reply-To: <1519743950-28346-4-git-send-email-kieran.bingham+renesas@ideasonboard.com>

Hi Kieran,

I like this change :-)

On 2018-02-27 15:05:50 +0000, Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham@ideasonboard.com>
> 
> The ADV748x has twelve 256-byte maps that can be accessed via the main
> I2C ports. Each map has it own I2C address and acts as a standard slave
> device on the I2C bus.
> 
> Allow a device tree node to override the default addresses so that
> address conflicts with other devices on the same bus may be resolved at
> the board description level.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 77 +++++++++++++++-----------------
>  drivers/media/i2c/adv748x/adv748x.h      | 14 ------
>  2 files changed, 36 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 9dcaadaca217..911ccf6eb68c 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -80,21 +80,24 @@ static int adv748x_configure_regmap(struct adv748x_state *state, int region)
>  
>  	return 0;
>  }
> +struct adv748x_register_map {
> +	const char *name;
> +	u8 default_addr;
> +};
>  
> -/* Default addresses for the I2C pages */
> -static int adv748x_i2c_addresses[ADV748X_PAGE_MAX] = {
> -	ADV748X_I2C_IO,
> -	ADV748X_I2C_DPLL,
> -	ADV748X_I2C_CP,
> -	ADV748X_I2C_HDMI,
> -	ADV748X_I2C_EDID,
> -	ADV748X_I2C_REPEATER,
> -	ADV748X_I2C_INFOFRAME,
> -	ADV748X_I2C_CBUS,
> -	ADV748X_I2C_CEC,
> -	ADV748X_I2C_SDP,
> -	ADV748X_I2C_TXB,
> -	ADV748X_I2C_TXA,
> +static const struct adv748x_register_map adv748x_default_addresses[] = {
> +	[ADV748X_PAGE_IO] = { "main", 0x70 },
> +	[ADV748X_PAGE_DPLL] = { "dpll", 0x26 },
> +	[ADV748X_PAGE_CP] = { "cp", 0x22 },
> +	[ADV748X_PAGE_HDMI] = { "hdmi", 0x34 },
> +	[ADV748X_PAGE_EDID] = { "edid", 0x36 },
> +	[ADV748X_PAGE_REPEATER] = { "repeater", 0x32 },
> +	[ADV748X_PAGE_INFOFRAME] = { "infoframe", 0x31 },
> +	[ADV748X_PAGE_CBUS] = { "cbus", 0x30 },
> +	[ADV748X_PAGE_CEC] = { "cec", 0x41 },
> +	[ADV748X_PAGE_SDP] = { "sdp", 0x79 },
> +	[ADV748X_PAGE_TXB] = { "txb", 0x48 },
> +	[ADV748X_PAGE_TXA] = { "txa", 0x4a },
>  };
>  
>  static int adv748x_read_check(struct adv748x_state *state,
> @@ -143,15 +146,20 @@ int adv748x_write_block(struct adv748x_state *state, int client_page,
>  	return regmap_raw_write(regmap, init_reg, val, val_len);
>  }
>  
> -static struct i2c_client *adv748x_dummy_client(struct adv748x_state *state,
> -					       u8 addr, u8 io_reg)
> +static int adv748x_set_slave_addresses(struct adv748x_state *state)
>  {
> -	struct i2c_client *client = state->client;
> +	struct i2c_client *client;
> +	unsigned int i;
> +	u8 io_reg;
> +
> +	for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
> +		io_reg = ADV748X_IO_SLAVE_ADDR_BASE + i;
> +		client = state->i2c_clients[i];
>  
> -	if (addr)
> -		io_write(state, io_reg, addr << 1);
> +		io_write(state, io_reg, client->addr << 1);
> +	}
>  
> -	return i2c_new_dummy(client->adapter, io_read(state, io_reg) >> 1);
> +	return 0;
>  }
>  
>  static void adv748x_unregister_clients(struct adv748x_state *state)
> @@ -164,13 +172,15 @@ static void adv748x_unregister_clients(struct adv748x_state *state)
>  
>  static int adv748x_initialise_clients(struct adv748x_state *state)
>  {
> -	int i;
> +	unsigned int i;
>  	int ret;
>  
>  	for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
> -		state->i2c_clients[i] =
> -			adv748x_dummy_client(state, adv748x_i2c_addresses[i],
> -					     ADV748X_IO_SLAVE_ADDR_BASE + i);
> +		state->i2c_clients[i] = i2c_new_secondary_device(
> +				state->client,
> +				adv748x_default_addresses[i].name,
> +				adv748x_default_addresses[i].default_addr);
> +
>  		if (state->i2c_clients[i] == NULL) {
>  			adv_err(state, "failed to create i2c client %u\n", i);
>  			return -ENOMEM;
> @@ -181,7 +191,7 @@ static int adv748x_initialise_clients(struct adv748x_state *state)
>  			return ret;
>  	}
>  
> -	return 0;
> +	return adv748x_set_slave_addresses(state);
>  }
>  
>  /**
> @@ -347,21 +357,6 @@ static const struct adv748x_reg_value adv748x_sw_reset[] = {
>  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
>  };
>  
> -static const struct adv748x_reg_value adv748x_set_slave_address[] = {
> -	{ADV748X_PAGE_IO, 0xf3, ADV748X_I2C_DPLL << 1},
> -	{ADV748X_PAGE_IO, 0xf4, ADV748X_I2C_CP << 1},
> -	{ADV748X_PAGE_IO, 0xf5, ADV748X_I2C_HDMI << 1},
> -	{ADV748X_PAGE_IO, 0xf6, ADV748X_I2C_EDID << 1},
> -	{ADV748X_PAGE_IO, 0xf7, ADV748X_I2C_REPEATER << 1},
> -	{ADV748X_PAGE_IO, 0xf8, ADV748X_I2C_INFOFRAME << 1},
> -	{ADV748X_PAGE_IO, 0xf9, ADV748X_I2C_CBUS << 1},
> -	{ADV748X_PAGE_IO, 0xfa, ADV748X_I2C_CEC << 1},
> -	{ADV748X_PAGE_IO, 0xfb, ADV748X_I2C_SDP << 1},
> -	{ADV748X_PAGE_IO, 0xfc, ADV748X_I2C_TXB << 1},
> -	{ADV748X_PAGE_IO, 0xfd, ADV748X_I2C_TXA << 1},
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
>  /* Supported Formats For Script Below */
>  /* - 01-29 HDMI to MIPI TxA CSI 4-Lane - RGB888: */
>  static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
> @@ -492,7 +487,7 @@ static int adv748x_reset(struct adv748x_state *state)
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = adv748x_write_regs(state, adv748x_set_slave_address);
> +	ret = adv748x_set_slave_addresses(state);
>  	if (ret < 0)
>  		return ret;
>  
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index 725662edc4b8..65f83741277e 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -27,20 +27,6 @@
>  #ifndef _ADV748X_H_
>  #define _ADV748X_H_
>  
> -/* I2C slave addresses */
> -#define ADV748X_I2C_IO			0x70	/* IO Map */
> -#define ADV748X_I2C_DPLL		0x26	/* DPLL Map */
> -#define ADV748X_I2C_CP			0x22	/* CP Map */
> -#define ADV748X_I2C_HDMI		0x34	/* HDMI Map */
> -#define ADV748X_I2C_EDID		0x36	/* EDID Map */
> -#define ADV748X_I2C_REPEATER		0x32	/* HDMI RX Repeater Map */
> -#define ADV748X_I2C_INFOFRAME		0x31	/* HDMI RX InfoFrame Map */
> -#define ADV748X_I2C_CBUS		0x30	/* CBUS MHL Map */
> -#define ADV748X_I2C_CEC			0x41	/* CEC Map */
> -#define ADV748X_I2C_SDP			0x79	/* SDP Map */
> -#define ADV748X_I2C_TXB			0x48	/* CSI-TXB Map */
> -#define ADV748X_I2C_TXA			0x4a	/* CSI-TXA Map */
> -
>  enum adv748x_page {
>  	ADV748X_PAGE_IO,
>  	ADV748X_PAGE_DPLL,
> -- 
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund

      reply	other threads:[~2018-03-01 15:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1519743950-28346-1-git-send-email-kieran.bingham+renesas@ideasonboard.com>
2018-02-27 15:05 ` [PATCH v2 1/3] media: i2c: adv748x: Simplify regmap configuration Kieran Bingham
2018-03-01 15:47   ` Niklas Söderlund
2018-02-27 15:05 ` [PATCH v2 2/3] media: i2c: adv748x: Add missing CBUS page Kieran Bingham
2018-02-27 15:05 ` [PATCH v2 3/3] media: i2c: adv748x: Add support for i2c_new_secondary_device Kieran Bingham
2018-03-01 15:56   ` Niklas Söderlund [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180301155603.GE19122@bigcity.dyn.berto.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).