From: Lina Iyer <ilina@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org, rnayak@codeaurora.org,
bjorn.andersson@linaro.org, linux-kernel@vger.kernel.org,
sboyd@kernel.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH v4 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
Date: Fri, 9 Mar 2018 16:25:39 -0700 [thread overview]
Message-ID: <20180309232543.24636-7-ilina@codeaurora.org> (raw)
In-Reply-To: <20180309232543.24636-1-ilina@codeaurora.org>
Allow sleep and wake commands to be cleared from the respective TCSes,
so that they can be re-populated.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
Changes in v4:
- refactored the rphm_rsc_invalidate()
---
drivers/soc/qcom/rpmh-internal.h | 1 +
drivers/soc/qcom/rpmh-rsc.c | 48 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 49 insertions(+)
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index 638662721086..3fab86a01f14 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -92,6 +92,7 @@ struct rsc_drv {
int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
const struct tcs_request *msg);
+int rpmh_rsc_invalidate(struct rsc_drv *drv);
void rpmh_tx_done(const struct tcs_request *msg, int r);
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 58fc7254b6f3..1dbccc4d0605 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -162,6 +162,54 @@ static struct tcs_group *get_tcs_of_type(struct rsc_drv *drv, int type)
return tcs;
}
+static int __tcs_invalidate(struct rsc_drv *drv, int type)
+{
+ int m;
+ struct tcs_group *tcs;
+
+ tcs = get_tcs_of_type(drv, type);
+ if (IS_ERR(tcs))
+ return PTR_ERR(tcs);
+
+ spin_lock(&tcs->lock);
+ if (bitmap_empty(tcs->slots, MAX_TCS_SLOTS)) {
+ spin_unlock(&tcs->lock);
+ return 0;
+ }
+
+ for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
+ if (!tcs_is_free(drv, m)) {
+ spin_unlock(&tcs->lock);
+ return -EAGAIN;
+ }
+ write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0, 0);
+ bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
+ }
+ spin_unlock(&tcs->lock);
+
+ return 0;
+}
+
+/**
+ * rpmh_rsc_invalidate - Invalidate sleep and wake TCSes
+ *
+ * @drv: the mailbox controller
+ */
+int rpmh_rsc_invalidate(struct rsc_drv *drv)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&drv->drv_lock, flags);
+ ret = __tcs_invalidate(drv, SLEEP_TCS);
+ if (!ret)
+ ret = __tcs_invalidate(drv, WAKE_TCS);
+ spin_unlock_irqrestore(&drv->drv_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(rpmh_rsc_invalidate);
+
static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
const struct tcs_request *msg)
{
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-03-09 23:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 23:25 [PATCH v4 00/10] drivers/qcom: add RPMH communication support Lina Iyer
2018-03-09 23:25 ` [PATCH v4 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs Lina Iyer
2018-03-09 23:25 ` [PATCH v4 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs Lina Iyer
2018-03-26 22:22 ` Rob Herring
2018-03-09 23:25 ` [PATCH v4 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE Lina Iyer
2018-03-09 23:52 ` Steven Rostedt
2018-03-10 4:47 ` Lina Iyer
2018-03-09 23:25 ` [PATCH v4 04/10] drivers: qcom: rpmh: add RPMH helper functions Lina Iyer
2018-03-09 23:25 ` [PATCH v4 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS Lina Iyer
2018-03-17 0:35 ` Evan Green
2018-03-09 23:25 ` Lina Iyer [this message]
2018-03-09 23:25 ` [PATCH v4 07/10] drivers: qcom: rpmh: cache sleep/wake state requests Lina Iyer
2018-03-17 0:36 ` Evan Green
2018-03-09 23:25 ` [PATCH v4 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously Lina Iyer
2018-03-09 23:25 ` [PATCH v4 09/10] drivers: qcom: rpmh: add support for batch RPMH request Lina Iyer
2018-03-17 0:36 ` Evan Green
2018-03-09 23:25 ` [PATCH v4 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS Lina Iyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180309232543.24636-7-ilina@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).