From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: sean.wang@mediatek.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com, sre@kernel.org,
lee.jones@linaro.org, a.zummo@towertech.it,
eddie.huang@mediatek.com, devicetree@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-pm@vger.kernel.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 11/16] rtc: mediatek: move the declaration into a globally visible header file
Date: Fri, 23 Mar 2018 10:57:40 +0100 [thread overview]
Message-ID: <20180323095740.GD3417@piout.net> (raw)
In-Reply-To: <53afbe8172fb1afd809ce9ba1afeda924b9ea705.1521794177.git.sean.wang@mediatek.com>
On 23/03/2018 at 17:15:08 +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> This is in preparation for allowing other drivers can share the
> declaration, so move the declaration into a globally visible header file.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> drivers/rtc/rtc-mt6397.c | 53 +---------------------------------
> include/linux/rtc/mt6397.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++
This should go in include/linux/mfd/
> 2 files changed, 73 insertions(+), 52 deletions(-)
> create mode 100644 include/linux/rtc/mt6397.h
>
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index d133d1f..015609d 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -19,63 +19,12 @@
> #include <linux/of_platform.h>
> #include <linux/regmap.h>
> #include <linux/rtc.h>
> -#include <linux/jiffies.h>
> #include <linux/platform_device.h>
> #include <linux/of_address.h>
> #include <linux/of_irq.h>
> #include <linux/io.h>
> #include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU 0x0000
> -#define RTC_BBPU_CBUSY BIT(6)
> -
> -#define RTC_WRTGR 0x003c
> -
> -#define RTC_IRQ_STA 0x0002
> -#define RTC_IRQ_STA_AL BIT(0)
> -#define RTC_IRQ_STA_LP BIT(3)
> -
> -#define RTC_IRQ_EN 0x0004
> -#define RTC_IRQ_EN_AL BIT(0)
> -#define RTC_IRQ_EN_ONESHOT BIT(2)
> -#define RTC_IRQ_EN_LP BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK 0x0008
> -#define RTC_AL_MASK_DOW BIT(4)
> -
> -#define RTC_TC_SEC 0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC 0
> -#define RTC_OFFSET_MIN 1
> -#define RTC_OFFSET_HOUR 2
> -#define RTC_OFFSET_DOM 3
> -#define RTC_OFFSET_DOW 4
> -#define RTC_OFFSET_MTH 5
> -#define RTC_OFFSET_YEAR 6
> -#define RTC_OFFSET_COUNT 7
> -
> -#define RTC_AL_SEC 0x0018
> -
> -#define RTC_PDN2 0x002e
> -#define RTC_PDN2_PWRON_ALARM BIT(4)
> -
> -#define RTC_MIN_YEAR 1968
> -#define RTC_BASE_YEAR 1900
> -#define RTC_NUM_YEARS 128
> -#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -#define MTK_RTC_POLL_DELAY_US 10
> -#define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
> -
> -struct mt6397_rtc {
> - struct device *dev;
> - struct rtc_device *rtc_dev;
> - struct mutex lock;
> - struct regmap *regmap;
> - int irq;
> - u32 addr_base;
> -};
> +#include <linux/rtc/mt6397.h>
>
> static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
> {
> diff --git a/include/linux/rtc/mt6397.h b/include/linux/rtc/mt6397.h
> new file mode 100644
> index 0000000..4b19f51
> --- /dev/null
> +++ b/include/linux/rtc/mt6397.h
> @@ -0,0 +1,72 @@
> +
Unnecessary empty line
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.
> + *
> + * Author: Tianping.Fang <tianping.fang@mediatek.com>
> + * Sean Wang <sean.wang@mediatek.com>
> + */
> +
> +#ifndef _LINUX_RTC_MT6397_H_
> +#define _LINUX_RTC_MT6397_H_
> +
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +
> +#define RTC_BBPU 0x0000
> +#define RTC_BBPU_CBUSY BIT(6)
> +
> +#define RTC_WRTGR 0x003c
> +
> +#define RTC_IRQ_STA 0x0002
> +#define RTC_IRQ_STA_AL BIT(0)
> +#define RTC_IRQ_STA_LP BIT(3)
> +
> +#define RTC_IRQ_EN 0x0004
> +#define RTC_IRQ_EN_AL BIT(0)
> +#define RTC_IRQ_EN_ONESHOT BIT(2)
> +#define RTC_IRQ_EN_LP BIT(3)
> +#define RTC_IRQ_EN_ONESHOT_AL (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> +
> +#define RTC_AL_MASK 0x0008
> +#define RTC_AL_MASK_DOW BIT(4)
> +
> +#define RTC_TC_SEC 0x000a
> +/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> +#define RTC_OFFSET_SEC 0
> +#define RTC_OFFSET_MIN 1
> +#define RTC_OFFSET_HOUR 2
> +#define RTC_OFFSET_DOM 3
> +#define RTC_OFFSET_DOW 4
> +#define RTC_OFFSET_MTH 5
> +#define RTC_OFFSET_YEAR 6
> +#define RTC_OFFSET_COUNT 7
> +
> +#define RTC_AL_SEC 0x0018
> +
> +#define RTC_PDN2 0x002e
> +#define RTC_PDN2_PWRON_ALARM BIT(4)
> +
> +#define RTC_MIN_YEAR 1968
> +#define RTC_BASE_YEAR 1900
> +#define RTC_NUM_YEARS 128
> +#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR)
> +
> +#define MTK_RTC_POLL_DELAY_US 10
> +#define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
> +
> +struct mt6397_rtc {
> + struct device *dev;
> + struct rtc_device *rtc_dev;
> +
> + /* protect registers accessing */
> + struct mutex lock;
> + struct regmap *regmap;
> + int irq;
> + u32 addr_base;
> +};
> +
> +#endif /* _LINUX_RTC_MT6397_H_ */
> +
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2018-03-23 9:57 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 9:14 [PATCH v1 00/16] Add support to MT6323 RTC and its power device sean.wang
2018-03-23 9:14 ` [PATCH v1 01/16] dt-bindings: power: reset: mediatek: add bindings for " sean.wang
2018-03-26 22:24 ` Rob Herring
2018-03-27 3:21 ` Sean Wang
2018-03-23 9:14 ` [PATCH v1 02/16] dt-bindings: rtc: mediatek: add bindings for PMIC RTC sean.wang
2018-03-23 9:41 ` Alexandre Belloni
2018-03-23 10:15 ` Alexandre Belloni
2018-03-24 19:36 ` Sean Wang
2018-03-27 15:18 ` Alexandre Belloni
2018-03-28 3:53 ` Sean Wang
2018-03-28 9:19 ` Alexandre Belloni
2018-03-23 9:15 ` [PATCH v1 03/16] dt-bindings: mfd: mediatek: add a description for MT6323 RTC sean.wang
2018-03-26 22:24 ` Rob Herring
2018-03-28 11:13 ` Lee Jones
2018-03-23 9:15 ` [PATCH v1 04/16] mfd: mt6397: add MT6323 RTC support into MT6397 driver sean.wang
2018-03-28 11:15 ` Lee Jones
2018-03-23 9:15 ` [PATCH v1 05/16] rtc: mediatek: add MT6323 support to RTC driver sean.wang
2018-03-23 10:01 ` Alexandre Belloni
2018-03-24 7:06 ` Sean Wang
2018-03-23 9:15 ` [PATCH v1 06/16] rtc: mediatek: remove unnecessary parentheses sean.wang
2018-03-23 10:21 ` Alexandre Belloni
2018-03-24 7:14 ` Sean Wang
2018-03-24 18:53 ` Alexandre Belloni
2018-03-24 19:21 ` Sean Wang
2018-03-23 9:15 ` [PATCH v1 07/16] rtc: mediatek: replace a poll with regmap_read_poll_timeout sean.wang
2018-03-23 9:15 ` [PATCH v1 08/16] rtc: mediatek: remove unnecessary irq_dispose_mapping sean.wang
2018-03-23 10:38 ` Alexandre Belloni
2018-03-26 2:22 ` Sean Wang
2018-03-23 9:15 ` [PATCH v1 09/16] rtc: mediatek: convert to use device managed functions sean.wang
2018-03-23 10:50 ` Alexandre Belloni
2018-03-26 4:07 ` Sean Wang
2018-03-27 15:07 ` Alexandre Belloni
2018-03-23 9:15 ` [PATCH v1 10/16] rtc: mediatek: add devm_of_platform_populate sean.wang
2018-03-23 9:15 ` [PATCH v1 11/16] rtc: mediatek: move the declaration into a globally visible header file sean.wang
2018-03-23 9:57 ` Alexandre Belloni [this message]
2018-03-24 7:31 ` Sean Wang
2018-03-24 18:54 ` Alexandre Belloni
2018-03-24 20:00 ` Fabio Estevam
2018-03-25 3:13 ` Sean Wang
2018-03-23 9:15 ` [PATCH v1 12/16] rtc: mediatek: cleanup header files to include sean.wang
2018-03-25 4:17 ` kbuild test robot
2018-03-25 5:21 ` kbuild test robot
2018-03-23 9:15 ` [PATCH v1 13/16] rtc: mediatek: update license converting to using SPDX identifiers sean.wang
2018-03-23 9:15 ` [PATCH v1 14/16] power: reset: mediatek: add a power-off driver using PMIC RTC device sean.wang
2018-03-23 9:15 ` [PATCH v1 15/16] MAINTAINERS: update entry for ARM/Mediatek RTC DRIVER sean.wang
2018-03-23 9:15 ` [PATCH v1 16/16] MAINTAINERS: add an entry for MediaTek board level shutdown driver sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180323095740.GD3417@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).