From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: "Jonathan Corbet" <corbet@lwn.net>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
kishon@ti.com
Subject: [PATCH v4 07/14] ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names
Date: Fri, 27 Apr 2018 17:38:58 +0530 [thread overview]
Message-ID: <20180427120905.3665-8-kishon@ti.com> (raw)
In-Reply-To: <20180427120905.3665-1-kishon@ti.com>
The IO lines of MMC2 in am57xx-beagle-x15/am57xx-idk is connected to
3.3v. Use "ddr_3_3v" instead of "ddr_1_8v" to indicate DDR mode
works in 3.3v on these boards.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am571x-idk.dts | 2 +-
arch/arm/boot/dts/am572x-idk.dts | 2 +-
arch/arm/boot/dts/am574x-idk.dts | 2 +-
arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index f7de03eb4377..5bb9d68d6e90 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -113,7 +113,7 @@
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 98b42ef33c46..3ef9111d0e8b 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -31,7 +31,7 @@
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index c7718b2d9fdf..378dfa780ac1 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -35,7 +35,7 @@
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_default>;
pinctrl-2 = <&mmc2_pins_default>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index d6689106d2a8..c76ea6579a81 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -28,7 +28,7 @@
};
&mmc2 {
- pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
--
2.17.0
next prev parent reply other threads:[~2018-04-27 12:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-27 12:08 [PATCH v4 00/14] dra7: mmc: Update mmc dt node to use sdhci-omap Kishon Vijay Abraham I
2018-04-27 12:08 ` [PATCH v4 01/14] ARM: dts: dra72-evm-common: Remove mmc specific pinmux Kishon Vijay Abraham I
2018-04-27 12:08 ` [PATCH v4 02/14] ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2 Kishon Vijay Abraham I
2018-04-27 12:08 ` [PATCH v4 03/14] ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup Kishon Vijay Abraham I
2018-04-27 12:08 ` [PATCH v4 04/14] ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown Kishon Vijay Abraham I
2018-04-27 12:08 ` [PATCH v4 05/14] ARM: dts: dra71-evm: " Kishon Vijay Abraham I
2018-04-27 12:08 ` [PATCH v4 06/14] ARM: dts: am574x-idk: Add pinmux configuration for MMC Kishon Vijay Abraham I
2018-04-27 12:08 ` Kishon Vijay Abraham I [this message]
2018-04-27 12:08 ` [PATCH v4 08/14] ARM: dts: dra72-evm-common: Add wilink8 wlan support Kishon Vijay Abraham I
2018-04-27 12:09 ` [PATCH v4 09/14] ARM: dts: dra7-evm: Model EVM_3V6 regulator Kishon Vijay Abraham I
2018-04-27 12:09 ` [PATCH v4 10/14] ARM: dts: dra7-evm: Add wilink8 wlan support Kishon Vijay Abraham I
2018-04-27 12:09 ` [PATCH v4 11/14] ARM: dts: dra76-evm: " Kishon Vijay Abraham I
2018-04-27 12:09 ` [PATCH v4 12/14] ARM: dts: dra7: Use sdhci-omap programming model Kishon Vijay Abraham I
2018-04-27 12:09 ` [PATCH v4 13/14] ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node Kishon Vijay Abraham I
2018-04-27 12:09 ` [PATCH v4 14/14] Documentation: ARM: Add new MMC requirements for DRA7/K2G Kishon Vijay Abraham I
2018-05-03 17:40 ` [PATCH v4 00/14] dra7: mmc: Update mmc dt node to use sdhci-omap Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180427120905.3665-8-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).