From: "Chang S. Bae" <chang.seok.bae@intel.com>
To: Ingo Molnar <mingo@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Andy Lutomirski <luto@kernel.org>,
"H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Markus T Metzger <markus.t.metzger@intel.com>,
Ravi Shankar <ravi.v.shankar@intel.com>,
"Chang S . Bae" <chang.seok.bae@intel.com>,
LKML <linux-kernel@vger.kernel.org>
Subject: [v3 02/12] x86/fsgsbase/64: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
Date: Tue, 23 Oct 2018 11:42:24 -0700 [thread overview]
Message-ID: <20181023184234.14025-3-chang.seok.bae@intel.com> (raw)
In-Reply-To: <20181023184234.14025-1-chang.seok.bae@intel.com>
From: Andy Lutomirski <luto@kernel.org>
This is temporary. It will allow the next few patches to be tested
incrementally.
Setting unsafe_fsgsbase is a root hole. Don't do it.
[ chang: Minor fix. Add the TAINT_INSECURE flag. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
---
.../admin-guide/kernel-parameters.txt | 3 +++
arch/x86/kernel/cpu/common.c | 27 +++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index ea8095521085..dfc2023b796b 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2729,6 +2729,9 @@
no5lvl [X86-64] Disable 5-level paging mode. Forces
kernel to use 4-level paging instead.
+ unsafe_fsgsbase [X86] Allow FSGSBASE instructions. This will be
+ replaced with a nofsgsbase flag.
+
no_console_suspend
[HW] Never suspend the console
Disable suspending of consoles during suspend and
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 660d0b22e962..6c54e6d2fdfb 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -365,6 +365,25 @@ static __always_inline void setup_umip(struct cpuinfo_x86 *c)
cr4_clear_bits(X86_CR4_UMIP);
}
+/*
+ * Temporary hack: FSGSBASE is unsafe until a few kernel code paths are
+ * updated. This allows us to get the kernel ready incrementally. Setting
+ * unsafe_fsgsbase and TAINT_INSECURE flags will allow the series to be
+ * bisected if necessary.
+ *
+ * Once all the pieces are in place, these will go away and be replaced with
+ * a nofsgsbase chicken flag.
+ */
+static bool unsafe_fsgsbase;
+
+static __init int setup_unsafe_fsgsbase(char *arg)
+{
+ unsafe_fsgsbase = true;
+ add_taint(TAINT_INSECURE, LOCKDEP_STILL_OK);
+ return 1;
+}
+__setup("unsafe_fsgsbase", setup_unsafe_fsgsbase);
+
/*
* Protection Keys are not available in 32-bit mode.
*/
@@ -1352,6 +1371,14 @@ static void identify_cpu(struct cpuinfo_x86 *c)
setup_smap(c);
setup_umip(c);
+ /* Enable FSGSBASE instructions if available. */
+ if (cpu_has(c, X86_FEATURE_FSGSBASE)) {
+ if (unsafe_fsgsbase)
+ cr4_set_bits(X86_CR4_FSGSBASE);
+ else
+ clear_cpu_cap(c, X86_FEATURE_FSGSBASE);
+ }
+
/*
* The vendor-specific functions might have changed features.
* Now we do "generic changes."
--
2.19.1
next prev parent reply other threads:[~2018-10-23 18:44 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-23 18:42 [v3 00/12] x86: Enable FSGSBASE instructions Chang S. Bae
2018-10-23 18:42 ` [v3 01/12] taint: Introduce a new taint flag (insecure) Chang S. Bae
2018-10-24 18:50 ` Andy Lutomirski
2018-10-23 18:42 ` Chang S. Bae [this message]
2018-10-24 18:51 ` [v3 02/12] x86/fsgsbase/64: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE Andy Lutomirski
2018-10-23 18:42 ` [v3 03/12] x86/fsgsbase/64: Add intrinsics/macros for FSGSBASE instructions Chang S. Bae
2018-10-24 18:53 ` Andy Lutomirski
2018-10-24 19:21 ` Andi Kleen
2018-10-25 23:14 ` Andy Lutomirski
2018-10-25 23:31 ` Linus Torvalds
2018-10-26 0:09 ` Andy Lutomirski
2018-10-23 18:42 ` [v3 04/12] x86/fsgsbase/64: Enable FSGSBASE instructions in the helper functions Chang S. Bae
2018-10-24 19:16 ` Andy Lutomirski
2018-10-24 19:41 ` [Xen-devel] " Andrew Cooper
2018-10-25 6:09 ` Juergen Gross
2018-10-25 23:08 ` Andrew Cooper
2018-10-25 23:11 ` Andy Lutomirski
2018-10-25 23:14 ` Andrew Cooper
2018-10-25 7:32 ` Bae, Chang Seok
2018-10-25 23:00 ` Andy Lutomirski
2018-10-25 23:03 ` Bae, Chang Seok
2018-10-25 23:16 ` Andy Lutomirski
2018-10-23 18:42 ` [v3 05/12] x86/fsgsbase/64: Preserve FS/GS state in __switch_to() if FSGSBASE is on Chang S. Bae
2018-10-24 19:21 ` Andy Lutomirski
2018-10-24 19:36 ` Bae, Chang Seok
2018-10-23 18:42 ` [v3 06/12] x86/fsgsbase/64: When copying a thread, use the FSGSBASE instructions if available Chang S. Bae
2018-10-23 18:42 ` [v3 07/12] x86/fsgsbase/64: Introduce the new FIND_PERCPU_BASE macro Chang S. Bae
2018-10-26 0:25 ` Andy Lutomirski
2018-10-26 0:59 ` Nadav Amit
2018-10-23 18:42 ` [v3 08/12] x86/fsgsbase/64: Use the per-CPU base as GSBASE at the paranoid_entry Chang S. Bae
2018-10-23 18:42 ` [v3 09/12] selftests/x86/fsgsbase: Test WRGSBASE Chang S. Bae
2018-10-23 18:42 ` [v3 10/12] x86/fsgsbase/64: Enable FSGSBASE by default and add a chicken bit Chang S. Bae
2018-10-23 18:42 ` [v3 11/12] x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 Chang S. Bae
2018-10-23 18:42 ` [v3 12/12] x86/fsgsbase/64: Add documentation for FSGSBASE Chang S. Bae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181023184234.14025-3-chang.seok.bae@intel.com \
--to=chang.seok.bae@intel.com \
--cc=ak@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=markus.t.metzger@intel.com \
--cc=mingo@kernel.org \
--cc=ravi.v.shankar@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).