From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v4 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes
Date: Fri, 9 Nov 2018 00:10:05 +0530 [thread overview]
Message-ID: <20181108184009.18430-15-vkoul@kernel.org> (raw)
In-Reply-To: <20181108184009.18430-1-vkoul@kernel.org>
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the TrustZone based remoteproc nodes and their glink edges for
adsp, cdsp and wcss. Enable them for EVB common DTS.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 12 +++++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 93 ++++++++++++++++++++++++++++++++
2 files changed, 105 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index cc5dfb319af8..ef37ad8f0d4e 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -21,6 +21,18 @@
};
};
+&remoteproc_adsp {
+ status = "ok";
+};
+
+&remoteproc_cdsp {
+ status = "ok";
+};
+
+&remoteproc_wcss {
+ status = "ok";
+};
+
&rpm_requests {
pms405-regulators {
compatible = "qcom,rpm-pms405-regulators";
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 373d514eb147..4805f66cd2cd 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -80,6 +80,99 @@
method = "smc";
};
+ remoteproc_adsp: remoteproc_adsp {
+ compatible = "qcom,qcs404-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_fw_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 8>;
+
+ label = "adsp";
+ };
+ };
+
+ remoteproc_cdsp: remoteproc_cdsp {
+ compatible = "qcom,qcs404-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <5>;
+ mboxes = <&apcs_glb 12>;
+
+ label = "cdsp";
+ };
+ };
+
+ remoteproc_wcss: remoteproc_wcss {
+ compatible = "qcom,qcs404-wcss-pas";
+
+ interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&wlan_fw_mem>;
+
+ qcom,smem-states = <&wcss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 16>;
+
+ label = "wcss";
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
--
2.14.4
next prev parent reply other threads:[~2018-11-08 18:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-08 18:39 [PATCH v4 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
2018-11-08 18:39 ` [PATCH v4 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul
2018-11-08 21:45 ` Rob Herring
2018-11-09 5:00 ` Vinod Koul
2018-11-09 8:10 ` Vinod Koul
2018-11-08 18:39 ` [PATCH v4 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul
2018-11-08 18:39 ` [PATCH v4 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul
2018-11-08 18:39 ` [PATCH v4 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul
2018-11-08 18:39 ` [PATCH v4 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators Vinod Koul
2018-11-08 18:39 ` [PATCH v4 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul
2018-11-08 18:39 ` [PATCH v4 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul
2018-11-08 18:39 ` [PATCH v4 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul
2018-11-08 18:40 ` [PATCH v4 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul
2018-11-08 18:40 ` [PATCH v4 10/18] arm64: dts: qcom: qcs404: " Vinod Koul
2018-11-08 18:40 ` [PATCH v4 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul
2018-11-08 18:40 ` [PATCH v4 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul
2018-11-08 21:42 ` Rob Herring
2018-11-09 5:02 ` Vinod Koul
2018-11-08 18:40 ` [PATCH v4 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul
2018-11-08 18:40 ` Vinod Koul [this message]
2018-11-08 18:40 ` [PATCH v4 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul
2018-11-08 18:40 ` [PATCH v4 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul
2018-11-08 18:40 ` [PATCH v4 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul
2018-11-08 18:40 ` [PATCH v4 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181108184009.18430-15-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).