From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: p.zabel@pengutronix.de
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
cphealy@gmail.com, l.stach@pengutronix.de,
Leonard Crestez <leonard.crestez@nxp.com>,
"A.s. Dong" <aisheng.dong@nxp.com>,
Richard Zhu <hongxing.zhu@nxp.com>, Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/3] reset: imx7: Add plubming to support multiple IP variants
Date: Wed, 19 Dec 2018 17:06:58 -0800 [thread overview]
Message-ID: <20181220010700.8598-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181220010700.8598-1-andrew.smirnov@gmail.com>
In order to enable supporting i.MX8MQ with this driver, convert it to
expect variant specific bits to be passed via driver data.
Cc: p.zabel@pengutronix.de
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: l.stach@pengutronix.de
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/reset/reset-imx7.c | 62 +++++++++++++++++++++++++++-----------
1 file changed, 45 insertions(+), 17 deletions(-)
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 77911fa8f31d..3a36d5863891 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -17,14 +17,29 @@
#include <linux/mfd/syscon.h>
#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/regmap.h>
#include <dt-bindings/reset/imx7-reset.h>
+struct imx7_src_signal {
+ unsigned int offset, bit;
+};
+
+struct imx7_src;
+
+struct imx7_src_variant {
+ const struct imx7_src_signal *signals;
+ unsigned int signals_num;
+ unsigned int (*prepare)(struct imx7_src *imx7src, unsigned long id,
+ bool assert);
+};
+
struct imx7_src {
struct reset_controller_dev rcdev;
struct regmap *regmap;
+ const struct imx7_src_variant *variant;
};
enum imx7_src_registers {
@@ -39,10 +54,6 @@ enum imx7_src_registers {
SRC_DDRC_RCR = 0x1000,
};
-struct imx7_src_signal {
- unsigned int offset, bit;
-};
-
static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
[IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
[IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
@@ -72,17 +83,11 @@ static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
[IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
};
-static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
+static unsigned int
+imx7_src_prepare(struct imx7_src *imx7src, unsigned long id, bool assert)
{
- return container_of(rcdev, struct imx7_src, rcdev);
-}
-
-static int imx7_reset_set(struct reset_controller_dev *rcdev,
- unsigned long id, bool assert)
-{
- struct imx7_src *imx7src = to_imx7_src(rcdev);
- const struct imx7_src_signal *signal = &imx7_src_signals[id];
- unsigned int value = assert ? signal->bit : 0;
+ const unsigned int bit = imx7src->variant->signals[id].bit;
+ unsigned int value = assert ? bit : 0;
switch (id) {
case IMX7_RESET_PCIEPHY:
@@ -95,10 +100,32 @@ static int imx7_reset_set(struct reset_controller_dev *rcdev,
break;
case IMX7_RESET_PCIE_CTRL_APPS_EN:
- value = (assert) ? 0 : signal->bit;
+ value = assert ? 0 : bit;
break;
}
+ return value;
+}
+
+static const struct imx7_src_variant variant_imx7 = {
+ .signals = imx7_src_signals,
+ .signals_num = ARRAY_SIZE(imx7_src_signals),
+ .prepare = imx7_src_prepare,
+};
+
+static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct imx7_src, rcdev);
+}
+
+static int imx7_reset_set(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct imx7_src *imx7src = to_imx7_src(rcdev);
+ const struct imx7_src_variant *variant = imx7src->variant;
+ const struct imx7_src_signal *signal = &variant->signals[id];
+ const unsigned int value = variant->prepare(imx7src, id, assert);
+
return regmap_update_bits(imx7src->regmap,
signal->offset, signal->bit, value);
}
@@ -130,6 +157,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
if (!imx7src)
return -ENOMEM;
+ imx7src->variant = of_device_get_match_data(dev);
imx7src->regmap = syscon_node_to_regmap(dev->of_node);
if (IS_ERR(imx7src->regmap)) {
dev_err(dev, "Unable to get imx7-src regmap");
@@ -138,7 +166,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
regmap_attach_dev(dev, imx7src->regmap, &config);
imx7src->rcdev.owner = THIS_MODULE;
- imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
+ imx7src->rcdev.nr_resets = imx7src->variant->signals_num;
imx7src->rcdev.ops = &imx7_reset_ops;
imx7src->rcdev.of_node = dev->of_node;
@@ -146,7 +174,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
}
static const struct of_device_id imx7_reset_dt_ids[] = {
- { .compatible = "fsl,imx7d-src", },
+ { .compatible = "fsl,imx7d-src", .data = &variant_imx7 },
{ /* sentinel */ },
};
--
2.19.1
next prev parent reply other threads:[~2018-12-20 1:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-20 1:06 [PATCH v4 0/3] Reset controller support for i.MX8MQ Andrey Smirnov
2018-12-20 1:06 ` Andrey Smirnov [this message]
2019-01-17 17:16 ` [PATCH v4 1/3] reset: imx7: Add plubming to support multiple IP variants Philipp Zabel
2019-01-17 22:20 ` Andrey Smirnov
2018-12-20 1:06 ` [PATCH v4 2/3] dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Andrey Smirnov
2019-01-17 16:45 ` Philipp Zabel
2019-01-17 22:38 ` Andrey Smirnov
2019-01-23 10:52 ` Philipp Zabel
2019-01-24 5:33 ` Andrey Smirnov
2019-01-24 9:11 ` Philipp Zabel
2018-12-20 1:07 ` [PATCH v4 3/3] reset: imx7: Add support for i.MX8MQ IP block variant Andrey Smirnov
2019-01-15 4:41 ` [PATCH v4 0/3] Reset controller support for i.MX8MQ Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181220010700.8598-2-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=cphealy@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).