linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Kemnade <andreas@kemnade.info>
To: t-kristo@ti.com, mturquette@baylibre.com, sboyd@kernel.org,
	linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, bcousson@baylibre.com,
	paul@pwsan.com, tony@atomide.com, letux-kernel@openphoenux.org
Cc: Andreas Kemnade <andreas@kemnade.info>
Subject: [PATCH v3 3/3] arm: omap_hwmod disable ick autoidling when a hwmod requires that
Date: Wed, 16 Jan 2019 23:04:29 +0100	[thread overview]
Message-ID: <20190116220429.9136-4-andreas@kemnade.info> (raw)
In-Reply-To: <20190116220429.9136-1-andreas@kemnade.info>

Deny autoidle for hwmods with the OCPIF_SWSUP_IDLE flag,
that makes hwmods working properly which cannot handle
autoidle properly in lower power states.
Affected is e. g. the omap_hdq.
Since an ick might have mulitple users, autoidle is disabled
when an individual user requires that rather than in
_setup_iclk_autoidle. dss_ick is an example for that.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 Comments to v1 to this patch were worked into a new 2/3
---
 arch/arm/mach-omap2/omap_hwmod.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b5531dd3ae9c..3a04c73ac03c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1002,8 +1002,10 @@ static int _enable_clocks(struct omap_hwmod *oh)
 		clk_enable(oh->_clk);
 
 	list_for_each_entry(os, &oh->slave_ports, node) {
-		if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+		if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) {
+			omap2_clk_deny_idle(os->_clk);
 			clk_enable(os->_clk);
+		}
 	}
 
 	/* The opt clocks are controlled by the device driver. */
@@ -1055,8 +1057,10 @@ static int _disable_clocks(struct omap_hwmod *oh)
 		clk_disable(oh->_clk);
 
 	list_for_each_entry(os, &oh->slave_ports, node) {
-		if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+		if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) {
 			clk_disable(os->_clk);
+			omap2_clk_allow_idle(os->_clk);
+		}
 	}
 
 	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
@@ -2436,9 +2440,13 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh)
 			continue;
 
 		if (os->flags & OCPIF_SWSUP_IDLE) {
-			/* XXX omap_iclk_deny_idle(c); */
+			/*
+			 * we might have multiple users of one iclk with
+			 * different requirements, disable autoidle when
+			 * the module is enabled, e.g. dss iclk
+			 */
 		} else {
-			/* XXX omap_iclk_allow_idle(c); */
+			/* we are enabling autoidle afterwards anyways */
 			clk_enable(os->_clk);
 		}
 	}
-- 
2.11.0


  parent reply	other threads:[~2019-01-16 22:04 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-16 22:04 [PATCH v3 0/3] mach-omap2: handle autoidle denial Andreas Kemnade
2019-01-16 22:04 ` [PATCH v3 1/3] clk: ti: add a usecount for autoidle Andreas Kemnade
2019-01-16 22:04 ` [PATCH v3 2/3] clk: ti: check clock type before doing autoidle ops Andreas Kemnade
2019-01-16 22:04 ` Andreas Kemnade [this message]
2019-01-18 15:48   ` [PATCH v3 3/3] arm: omap_hwmod disable ick autoidling when a hwmod requires that Tony Lindgren
2019-01-18 17:18     ` Andreas Kemnade
2019-01-18 18:36       ` Tony Lindgren
2019-01-18 19:38         ` Andreas Kemnade
2019-01-18 19:42           ` [Letux-kernel] " Andreas Kemnade
2019-01-18 19:48             ` Tony Lindgren
2019-01-19  6:39               ` J, KEERTHY
2019-01-19  7:12                 ` Andreas Kemnade
2019-01-19  7:58                   ` J, KEERTHY
2019-01-22  6:26                     ` Keerthy
2019-01-18 19:45           ` Tony Lindgren
2019-01-21  7:12             ` Tero Kristo
2019-01-21 17:07               ` Tony Lindgren
2019-01-21 17:53                 ` Andreas Kemnade
2019-01-21 19:56                   ` Tony Lindgren
2019-01-21 19:58 ` [PATCH v3 0/3] mach-omap2: handle autoidle denial Tony Lindgren
2019-02-09 18:53   ` Andreas Kemnade
2019-02-15 19:19     ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190116220429.9136-4-andreas@kemnade.info \
    --to=andreas@kemnade.info \
    --cc=bcousson@baylibre.com \
    --cc=letux-kernel@openphoenux.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=paul@pwsan.com \
    --cc=sboyd@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).