From: Anup Patel <Anup.Patel@wdc.com>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Atish Patra <Atish.Patra@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Christoph Hellwig <hch@infradead.org>,
"linux-riscv@lists.infradead.org"
<linux-riscv@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Anup Patel <Anup.Patel@wdc.com>
Subject: [PATCH v2 5/6] RISC-V: Implement compile-time fixed mappings
Date: Sat, 19 Jan 2019 13:28:51 +0000 [thread overview]
Message-ID: <20190119132650.9978-6-anup.patel@wdc.com> (raw)
In-Reply-To: <20190119132650.9978-1-anup.patel@wdc.com>
This patch implements compile-time virtual to physical
mappings. These compile-time fixed mappings can be used
by earlycon, ACPI, and early ioremap for creating fixed
mappings when FIX_EARLYCON_MEM=y.
To start with, we have enabled compile-time fixed
mappings for earlycon.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
arch/riscv/Kconfig | 3 +++
arch/riscv/include/asm/fixmap.h | 44 +++++++++++++++++++++++++++++++++
arch/riscv/mm/init.c | 34 +++++++++++++++++++++++++
3 files changed, 81 insertions(+)
create mode 100644 arch/riscv/include/asm/fixmap.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index feeeaa60697c..c18bba5d0e32 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -89,6 +89,9 @@ config GENERIC_CSUM
config GENERIC_HWEIGHT
def_bool y
+config FIX_EARLYCON_MEM
+ def_bool y
+
config PGTABLE_LEVELS
int
default 3 if 64BIT
diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
new file mode 100644
index 000000000000..57afe604b495
--- /dev/null
+++ b/arch/riscv/include/asm/fixmap.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Western Digital Corporation or its affiliates.
+ */
+
+#ifndef _ASM_RISCV_FIXMAP_H
+#define _ASM_RISCV_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <linux/sizes.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual addresses.
+ * The point is to have a constant address at compile time, but to
+ * set the physical address only in the boot process.
+ *
+ * These 'compile-time allocated' memory buffers are page-sized. Use
+ * set_fixmap(idx,phys) to associate physical memory with fixmap indices.
+ */
+enum fixed_addresses {
+ FIX_HOLE,
+ FIX_EARLYCON_MEM_BASE,
+ __end_of_fixed_addresses
+};
+
+#define FIXADDR_SIZE (__end_of_fixed_addresses * PAGE_SIZE)
+#define FIXADDR_TOP (PAGE_OFFSET)
+#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+#define FIXMAP_PAGE_IO PAGE_KERNEL
+
+#define __early_set_fixmap __set_fixmap
+
+#define __late_set_fixmap __set_fixmap
+#define __late_clear_fixmap(idx) __set_fixmap((idx), 0, FIXMAP_PAGE_CLEAR)
+
+extern void __set_fixmap(enum fixed_addresses idx,
+ phys_addr_t phys, pgprot_t prot);
+
+#include <asm-generic/fixmap.h>
+
+#endif /* _ASM_RISCV_FIXMAP_H */
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index f8e396dc80a4..4c627b8d53c7 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -18,6 +18,7 @@
#include <linux/sizes.h>
#include <linux/of_fdt.h>
+#include <asm/fixmap.h>
#include <asm/tlbflush.h>
#include <asm/sections.h>
#include <asm/pgtable.h>
@@ -110,8 +111,28 @@ pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
#endif
+pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
+
+void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
+{
+ unsigned long addr = __fix_to_virt(idx);
+ pte_t *ptep;
+
+ BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
+
+ ptep = &fixmap_pte[pte_index(addr)];
+
+ if (pgprot_val(prot)) {
+ set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
+ } else {
+ pte_clear(&init_mm, addr, ptep);
+ local_flush_tlb_page(addr);
+ }
+}
+
asmlinkage void __init setup_vm(void)
{
extern char _start;
@@ -134,20 +155,33 @@ asmlinkage void __init setup_vm(void)
for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+
swapper_pg_dir[o] =
pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
__pgprot(_PAGE_TABLE));
}
for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
+
+ swapper_pg_dir[(FIXADDR_START >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN((uintptr_t)fixmap_pmd),
+ __pgprot(_PAGE_TABLE));
+ fixmap_pmd[(FIXADDR_START >> PMD_SHIFT) % PTRS_PER_PMD] =
+ pfn_pmd(PFN_DOWN((uintptr_t)fixmap_pte),
+ __pgprot(_PAGE_TABLE));
#else
trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
pfn_pgd(PFN_DOWN(pa), prot);
for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+
swapper_pg_dir[o] =
pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
}
+
+ swapper_pg_dir[(FIXADDR_START >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN((uintptr_t)fixmap_pte),
+ __pgprot(_PAGE_TABLE));
#endif
}
--
2.17.1
next prev parent reply other threads:[~2019-01-19 13:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-19 13:27 [PATCH v2 0/6] Fixmap support and MM cleanups Anup Patel
2019-01-19 13:27 ` [PATCH v2 1/6] RISC-V: Move free_initrd_mem() to kernel/setup.c Anup Patel
2019-01-19 13:28 ` [PATCH v2 2/6] RISC-V: Setup init_mm before parse_early_param() Anup Patel
2019-02-12 7:05 ` Christoph Hellwig
2019-01-19 13:28 ` [PATCH v2 3/6] RISC-V: Move setup_bootmem() to mm/init.c Anup Patel
2019-01-19 13:28 ` [PATCH v2 4/6] RISC-V: Move setup_vm() " Anup Patel
2019-01-19 13:28 ` Anup Patel [this message]
2019-02-12 7:06 ` [PATCH v2 5/6] RISC-V: Implement compile-time fixed mappings Christoph Hellwig
2019-01-19 13:28 ` [PATCH v2 6/6] RISC-V: Implement keepinitrd kernel parameter Anup Patel
2019-02-12 7:08 ` Christoph Hellwig
2019-02-12 10:23 ` Anup Patel
2019-02-12 10:37 ` Andreas Schwab
2019-02-12 13:53 ` Anup Patel
2019-02-12 18:45 ` Christoph Hellwig
2019-02-13 3:43 ` Anup Patel
2019-02-13 5:55 ` Christoph Hellwig
2019-02-13 6:05 ` Anup Patel
2019-02-12 21:59 ` Palmer Dabbelt
2019-02-11 6:27 ` [PATCH v2 0/6] Fixmap support and MM cleanups Anup Patel
2019-02-12 23:15 ` Palmer Dabbelt
2019-02-13 8:21 ` Anup Patel
2019-02-13 9:20 ` Johan Hovold
2019-02-14 0:37 ` Palmer Dabbelt
2019-02-14 8:28 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190119132650.9978-6-anup.patel@wdc.com \
--to=anup.patel@wdc.com \
--cc=Atish.Patra@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).