linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: "bbrezillon@kernel.org" <bbrezillon@kernel.org>,
	"miquel.raynal@bootlin.com" <miquel.raynal@bootlin.com>,
	"richard@nod.at" <richard@nod.at>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	"Marek Vasut" <marek.vasut@gmail.com>
Cc: "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Schrempf Frieder" <frieder.schrempf@kontron.de>
Subject: [PATCH v3 1/5] mtd: nand: Always store info about bad block markers in chip struct
Date: Wed, 30 Jan 2019 13:01:44 +0000	[thread overview]
Message-ID: <20190130130111.32724-2-frieder.schrempf@kontron.de> (raw)
In-Reply-To: <20190130130111.32724-1-frieder.schrempf@kontron.de>

From: Frieder Schrempf <frieder.schrempf@kontron.de>

The information about where the manufacturer puts the bad block
markers inside the bad block and in the OOB data is stored in
different places. Let's move this information to nand_chip.options
and nand_chip.badblockpos.

As this chip-specific information is not directly related to the
bad block table (BBT), we also rename the flags to NAND_BBM_*.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 drivers/mtd/nand/onenand/onenand_base.c |  2 +-
 drivers/mtd/nand/onenand/onenand_bbt.c  |  2 +-
 drivers/mtd/nand/raw/nand_amd.c         |  2 +-
 drivers/mtd/nand/raw/nand_base.c        | 12 ++++++------
 drivers/mtd/nand/raw/nand_bbt.c         |  4 ++--
 drivers/mtd/nand/raw/nand_esmt.c        |  2 +-
 drivers/mtd/nand/raw/nand_hynix.c       |  4 ++--
 drivers/mtd/nand/raw/nand_macronix.c    |  2 +-
 drivers/mtd/nand/raw/nand_micron.c      |  2 +-
 drivers/mtd/nand/raw/nand_samsung.c     |  4 ++--
 drivers/mtd/nand/raw/nand_toshiba.c     |  2 +-
 drivers/mtd/nand/raw/sh_flctl.c         |  4 ++--
 include/linux/mtd/bbm.h                 | 14 +-------------
 include/linux/mtd/rawnand.h             | 15 +++++++++++++++
 14 files changed, 37 insertions(+), 34 deletions(-)

diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index 4ca4b194e7d7..d6701b8f031f 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -2458,7 +2458,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
         /* We write two bytes, so we don't have to mess with 16-bit access */
-        ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+        ofs += mtd->oobsize + (this->badblockpos & ~0x01);
 	/* FIXME : What to do when marking SLC block in partition
 	 * 	   with MLC erasesize? For now, it is not advisable to
 	 *	   create partitions containing both SLC and MLC regions.
diff --git a/drivers/mtd/nand/onenand/onenand_bbt.c b/drivers/mtd/nand/onenand/onenand_bbt.c
index dde20487937d..880b0abd36c8 100644
--- a/drivers/mtd/nand/onenand/onenand_bbt.c
+++ b/drivers/mtd/nand/onenand/onenand_bbt.c
@@ -191,7 +191,7 @@ static int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 		return -ENOMEM;
 
 	/* Set the bad block position */
-	bbm->badblockpos = ONENAND_BADBLOCK_POS;
+	this->badblockpos = NAND_BBM_POS_ONENAND;
 
 	/* Set erase shift */
 	bbm->bbt_erase_shift = this->erase_shift;
diff --git a/drivers/mtd/nand/raw/nand_amd.c b/drivers/mtd/nand/raw/nand_amd.c
index 890c5b43e03c..6e248bdcc797 100644
--- a/drivers/mtd/nand/raw/nand_amd.c
+++ b/drivers/mtd/nand/raw/nand_amd.c
@@ -40,7 +40,7 @@ static void amd_nand_decode_id(struct nand_chip *chip)
 static int amd_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index cca4b24d2ffa..c6199cc68d2f 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -298,11 +298,11 @@ static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
 	int page, page_end, res;
 	u8 bad;
 
-	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+	if (chip->options & NAND_BBM_LASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
-	page_end = page + (chip->bbt_options & NAND_BBT_SCAN2NDPAGE ? 2 : 1);
+	page_end = page + ((chip->options & NAND_BBM_SECONDPAGE) ? 2 : 1);
 
 	for (; page < page_end; page++) {
 		res = chip->ecc.read_oob(chip, page);
@@ -541,7 +541,7 @@ static int nand_default_block_markbad(struct nand_chip *chip, loff_t ofs)
 	ops.mode = MTD_OPS_PLACE_OOB;
 
 	/* Write to first/last page(s) if necessary */
-	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+	if (chip->options & NAND_BBM_LASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 	do {
 		res = nand_do_write_oob(chip, ofs, &ops);
@@ -550,7 +550,7 @@ static int nand_default_block_markbad(struct nand_chip *chip, loff_t ofs)
 
 		i++;
 		ofs += mtd->writesize;
-	} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+	} while ((chip->options & NAND_BBM_SECONDPAGE) && i < 2);
 
 	return ret;
 }
@@ -4576,9 +4576,9 @@ static void nand_decode_bbm_options(struct nand_chip *chip)
 
 	/* Set the bad block position */
 	if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16))
-		chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+		chip->badblockpos = NAND_BBM_POS_LARGE;
 	else
-		chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+		chip->badblockpos = NAND_BBM_POS_SMALL;
 }
 
 static inline bool is_full_id_nand(struct nand_flash_dev *type)
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 1b722fe9213c..862eaa3a0552 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -466,7 +466,7 @@ static int create_bbt(struct nand_chip *this, uint8_t *buf,
 
 	pr_info("Scanning device for bad blocks\n");
 
-	if (bd->options & NAND_BBT_SCAN2NDPAGE)
+	if (this->options & NAND_BBM_SECONDPAGE)
 		numpages = 2;
 	else
 		numpages = 1;
@@ -487,7 +487,7 @@ static int create_bbt(struct nand_chip *this, uint8_t *buf,
 		from = (loff_t)startblock << this->bbt_erase_shift;
 	}
 
-	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
+	if (this->bbt_options & NAND_BBM_LASTPAGE)
 		from += mtd->erasesize - (mtd->writesize * numpages);
 
 	for (i = startblock; i < numblocks; i++) {
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 96f039a83bc8..80d2d3a1b5f2 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -36,7 +36,7 @@ static void esmt_nand_decode_id(struct nand_chip *chip)
 static int esmt_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 343f477362d1..2789bf3857c9 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -672,9 +672,9 @@ static int hynix_nand_init(struct nand_chip *chip)
 	int ret;
 
 	if (!nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+		chip->options |= NAND_BBM_LASTPAGE;
 	else
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	hynix = kzalloc(sizeof(*hynix), GFP_KERNEL);
 	if (!hynix)
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 47d8cda547cf..6db7ced4b96b 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -62,7 +62,7 @@ static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip)
 static int macronix_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	macronix_nand_fix_broken_get_timings(chip);
 
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index b85e1c13b79e..ea6b6e80d6f8 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -448,7 +448,7 @@ static int micron_nand_init(struct nand_chip *chip)
 		goto err_free_manuf_data;
 
 	if (mtd->writesize == 2048)
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	ondie = micron_supports_on_die_ecc(chip);
 
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index e46d4c492ad8..3be737139210 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -121,9 +121,9 @@ static int samsung_nand_init(struct nand_chip *chip)
 		chip->options |= NAND_SAMSUNG_LP_OPTIONS;
 
 	if (!nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+		chip->options |= NAND_BBM_LASTPAGE;
 	else
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index d068163b64b3..222a66bf0aa6 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -147,7 +147,7 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 static int toshiba_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |=  NAND_BBM_SECONDPAGE;
 
 	/* Check that chip is BENAND and ECC mode is on-die */
 	if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index cf6b1be1cf9c..2017b00fadd8 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -101,14 +101,12 @@ static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
 static struct nand_bbt_descr flctl_4secc_smallpage = {
-	.options = NAND_BBT_SCAN2NDPAGE,
 	.offs = 11,
 	.len = 1,
 	.pattern = scan_ff_pattern,
 };
 
 static struct nand_bbt_descr flctl_4secc_largepage = {
-	.options = NAND_BBT_SCAN2NDPAGE,
 	.offs = 0,
 	.len = 2,
 	.pattern = scan_ff_pattern,
@@ -1178,6 +1176,8 @@ static int flctl_probe(struct platform_device *pdev)
 	if (pdata->flcmncr_val & SEL_16BIT)
 		nand->options |= NAND_BUSWIDTH_16;
 
+	nand->options |= NAND_BBM_SECONDPAGE;
+
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_resume(&pdev->dev);
 
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 3102bd754d18..010bc5544c54 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -93,10 +93,7 @@ struct nand_bbt_descr {
 #define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
 #define NAND_BBT_SAVECONTENT	0x00004000
-/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00008000
-/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE	0x00010000
+
 /*
  * Use a flash based bad block table. By default, OOB identifier is saved in
  * OOB area. This option is passed to the default bad block table function.
@@ -123,13 +120,6 @@ struct nand_bbt_descr {
 /* The maximum number of blocks to scan for a bbt */
 #define NAND_BBT_SCAN_MAXBLOCKS	4
 
-/*
- * Constants for oob configuration
- */
-#define NAND_SMALL_BADBLOCK_POS		5
-#define NAND_LARGE_BADBLOCK_POS		0
-#define ONENAND_BADBLOCK_POS		0
-
 /*
  * Bad block scanning errors
  */
@@ -140,7 +130,6 @@ struct nand_bbt_descr {
 /**
  * struct bbm_info - [GENERIC] Bad Block Table data structure
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
- * @badblockpos:	[INTERN] position of the bad block marker in the oob area
  * @options:		options for this descriptor
  * @bbt:		[INTERN] bad block table pointer
  * @isbad_bbt:		function to determine if a block is bad
@@ -150,7 +139,6 @@ struct nand_bbt_descr {
  */
 struct bbm_info {
 	int bbt_erase_shift;
-	int badblockpos;
 	int options;
 
 	uint8_t *bbt;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 33e240acdc6d..da785d92e26e 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -169,6 +169,21 @@ enum nand_ecc_algo {
 /* Macros to identify the above */
 #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
 
+/*
+ * There are different places where the manufacturer stores the factory bad
+ * block markers.
+ *
+ * Position within the block: Each of these pages needs to be checked for a
+ * bad block marking pattern.
+ */
+#define NAND_BBM_SECONDPAGE		0x02000000
+#define NAND_BBM_LASTPAGE		0x04000000
+
+/* Position within the OOB data of the page */
+#define NAND_BBM_POS_SMALL		5
+#define NAND_BBM_POS_LARGE		0
+#define NAND_BBM_POS_ONENAND		0
+
 /* Non chip related options */
 /* This option skips the bbt scan during initialization. */
 #define NAND_SKIP_BBTSCAN	0x00010000
-- 
2.17.1

  reply	other threads:[~2019-01-30 13:01 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-30 13:01 [PATCH v3 0/5] mtd: rawnand: Support bad block markers in first, second or last page Schrempf Frieder
2019-01-30 13:01 ` Schrempf Frieder [this message]
2019-01-30 13:28   ` [PATCH v3 1/5] mtd: nand: Always store info about bad block markers in chip struct Boris Brezillon
2019-01-30 13:37     ` Schrempf Frieder
2019-01-30 13:01 ` [PATCH v3 2/5] mtd: nand: Make flags for bad block marker position more granular Schrempf Frieder
2019-01-30 13:38   ` Boris Brezillon
2019-01-30 13:01 ` [PATCH v3 3/5] mtd: rawnand: Support bad block markers in first, second or last page Schrempf Frieder
2019-01-30 13:01 ` [PATCH v3 4/5] mtd: rawnand: ESMT: Also use the last page for bad block markers Schrempf Frieder
2019-01-30 13:01 ` [PATCH v3 5/5] mtd: rawnand: AMD: " Schrempf Frieder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190130130111.32724-2-frieder.schrempf@kontron.de \
    --to=frieder.schrempf@kontron.de \
    --cc=bbrezillon@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).