linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>, <linux-clk@vger.kernel.org>,
	<srv_heupstream@mediatek.com>, <stable@vger.kernel.org>,
	Weiyi Lu <weiyi.lu@mediatek.com>,
	Owen Chen <owen.chen@mediatek.com>,
	Mars Cheng <mars.cheng@mediatek.com>
Subject: [PATCH v4 04/12] soc: mediatek: add new flow for mtcmos power.
Date: Fri, 1 Feb 2019 16:30:08 +0800	[thread overview]
Message-ID: <20190201083016.25856-6-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <20190201083016.25856-1-weiyi.lu@mediatek.com>

From: Owen Chen <owen.chen@mediatek.com>

Both MT8183 & MT6765 add more bus protect node than previous project,
therefore we add two more register for setup bus protect, which reside
at INFRA_CFG & SMI_COMMON.

With the following change
1. bus protect need not only infracfg but smi_common registers involved
   to setup. Therefore we add a set/clr APIs with more customize arguments.

The second change is that we also add subsys CG control flow before/after
the bus protect/sram control, due to bus protect need SMI bus relative CGs
enable to feed-back its ack, and some master's sram control need CG enable
to on/off its resource sequentially.

With the following change
1. turn on subsys CG before sram pwron and release bus protect.
2. turn off subsys CG after the process of set bus protect/receive
   ack/disable sram.

The last change is for some power domains like vpu_core on MT8183 whose
sram need to do clock and internal isolation while power on/off sram.
We add a flag "sram_iso_ctrl" in scp_domain_data to judge if we need to
do the extra sram isolation control or not.

Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/Makefile           |   2 +-
 drivers/soc/mediatek/mtk-scpsys-ext.c   |  99 +++++++
 drivers/soc/mediatek/mtk-scpsys.c       | 376 ++++++++++++++++++------
 include/linux/soc/mediatek/scpsys-ext.h |  39 +++
 4 files changed, 428 insertions(+), 88 deletions(-)
 create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c
 create mode 100644 include/linux/soc/mediatek/scpsys-ext.h

diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index 64ce5eeaba32..b9dbad6b12f9 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1,4 +1,4 @@
 obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
-obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
+obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o mtk-scpsys-ext.o
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
 obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-scpsys-ext.c b/drivers/soc/mediatek/mtk-scpsys-ext.c
new file mode 100644
index 000000000000..f630edb2f65d
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-scpsys-ext.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <Owen.Chen@mediatek.com>
+ */
+#include <linux/ktime.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/soc/mediatek/scpsys-ext.h>
+
+#define MTK_POLL_DELAY_US   10
+#define MTK_POLL_TIMEOUT    USEC_PER_SEC
+
+static int set_bus_protection(struct regmap *map, u32 mask, u32 ack_mask,
+		u32 reg_set, u32 reg_sta, u32 reg_en)
+{
+	u32 val;
+
+	if (reg_set)
+		regmap_write(map, reg_set, mask);
+	else
+		regmap_update_bits(map, reg_en, mask, mask);
+
+	return regmap_read_poll_timeout(map, reg_sta,
+			val, (val & ack_mask) == ack_mask,
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+static int clear_bus_protection(struct regmap *map, u32 mask, u32 ack_mask,
+		u32 reg_clr, u32 reg_sta, u32 reg_en)
+{
+	u32 val;
+
+	if (reg_clr)
+		regmap_write(map, reg_clr, mask);
+	else
+		regmap_update_bits(map, reg_en, mask, 0);
+
+	return regmap_read_poll_timeout(map, reg_sta,
+			val, !(val & ack_mask),
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common)
+{
+	int i;
+
+	for (i = 0; i < MAX_STEPS && bp_table[i].mask; i++) {
+		struct regmap *map;
+		int ret;
+
+		if (bp_table[i].type == IFR_TYPE)
+			map = infracfg;
+		else if (bp_table[i].type == SMI_TYPE)
+			map = smi_common;
+		else
+			return -EINVAL;
+
+		ret = set_bus_protection(map,
+				bp_table[i].mask, bp_table[i].mask,
+				bp_table[i].set_ofs, bp_table[i].sta_ofs,
+				bp_table[i].en_ofs);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common)
+{
+	int i;
+
+	for (i = MAX_STEPS - 1; i >= 0; i--) {
+		struct regmap *map;
+		int ret;
+
+		if (bp_table[i].type == IFR_TYPE)
+			map = infracfg;
+		else if (bp_table[i].type == SMI_TYPE)
+			map = smi_common;
+		else
+			return -EINVAL;
+
+		ret = clear_bus_protection(map,
+				bp_table[i].mask, bp_table[i].clr_ack_mask,
+				bp_table[i].clr_ofs, bp_table[i].sta_ofs,
+				bp_table[i].en_ofs);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 5b24bb4bfbf6..53a16fa327cf 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -1,15 +1,7 @@
-/*
- * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
+
 #include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -20,6 +12,7 @@
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>
 #include <linux/soc/mediatek/infracfg.h>
+#include <linux/soc/mediatek/scpsys-ext.h>
 
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/power/mt2712-power.h>
@@ -29,7 +22,7 @@
 #include <dt-bindings/power/mt8173-power.h>
 
 #define MTK_POLL_DELAY_US   10
-#define MTK_POLL_TIMEOUT    (jiffies_to_usecs(HZ))
+#define MTK_POLL_TIMEOUT    USEC_PER_SEC
 
 #define MTK_SCPD_ACTIVE_WAKEUP		BIT(0)
 #define MTK_SCPD_FWAIT_SRAM		BIT(1)
@@ -64,6 +57,8 @@
 #define PWR_ON_BIT			BIT(2)
 #define PWR_ON_2ND_BIT			BIT(3)
 #define PWR_CLK_DIS_BIT			BIT(4)
+#define PWR_SRAM_CLKISO_BIT		BIT(5)
+#define PWR_SRAM_ISOINT_B_BIT		BIT(6)
 
 #define PWR_STATUS_CONN			BIT(1)
 #define PWR_STATUS_DISP			BIT(3)
@@ -115,16 +110,40 @@ static const char * const clk_names[] = {
 };
 
 #define MAX_CLKS	3
-
+#define MAX_SUBSYS_CLKS 10
+
+/**
+ * struct scp_domain_data - scp domain data for power on/off flow
+ * @name: The domain name.
+ * @sta_mask: The mask for power on/off status bit.
+ * @ctl_offs: The offset for main power control register.
+ * @sram_iso_ctrl: The flag to judge if the power domain need to do
+ *                 the extra sram isolation control.
+ * @sram_pdn_bits: The mask for sram power control bits.
+ * @sram_pdn_ack_bits: The mask for sram power control acked bits.
+ * @bus_prot_mask: The mask for single step bus protection.
+ * @clk_id: The basic clock needs to be enabled before enabling certain
+ *          power domains.
+ * @basic_clk_name: provide the same purpose with field "clk_id"
+ *                  by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ *                     before releasing bus protection.
+ * @caps: The flag for active wake-up action.
+ * @bp_table: The mask table for multiple step bus protection.
+ */
 struct scp_domain_data {
 	const char *name;
 	u32 sta_mask;
 	int ctl_offs;
+	bool sram_iso_ctrl;
 	u32 sram_pdn_bits;
 	u32 sram_pdn_ack_bits;
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
+	const char *basic_clk_name[MAX_CLKS];
+	const char *subsys_clk_prefix;
 	u8 caps;
+	struct bus_prot bp_table[MAX_STEPS];
 };
 
 struct scp;
@@ -133,6 +152,7 @@ struct scp_domain {
 	struct generic_pm_domain genpd;
 	struct scp *scp;
 	struct clk *clk[MAX_CLKS];
+	struct clk *subsys_clk[MAX_SUBSYS_CLKS];
 	const struct scp_domain_data *data;
 	struct regulator *supply;
 };
@@ -148,6 +168,7 @@ struct scp {
 	struct device *dev;
 	void __iomem *base;
 	struct regmap *infracfg;
+	struct regmap *smi_common;
 	struct scp_ctrl_reg ctrl_reg;
 	bool bus_prot_reg_update;
 };
@@ -188,32 +209,166 @@ static int scpsys_domain_is_on(struct scp_domain *scpd)
 	return -EINVAL;
 }
 
+static int scpsys_regulator_enable(struct scp_domain *scpd)
+{
+	if (!scpd->supply)
+		return 0;
+
+	return regulator_enable(scpd->supply);
+}
+
+static int scpsys_regulator_disable(struct scp_domain *scpd)
+{
+	if (!scpd->supply)
+		return 0;
+
+	return regulator_disable(scpd->supply);
+}
+
+static int scpsys_clk_enable(struct clk *clk[], int max_num)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < max_num && clk[i]; i++) {
+		ret = clk_prepare_enable(clk[i]);
+		if (ret) {
+			for (--i; i >= 0; i--)
+				clk_disable_unprepare(clk[i]);
+
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int scpsys_clk_disable(struct clk *clk[], int max_num)
+{
+	int i;
+
+	for (i = max_num - 1; i >= 0; i--) {
+		if (clk[i])
+			clk_disable_unprepare(clk[i]);
+	}
+
+	return 0;
+}
+
+static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
+{
+	u32 val;
+	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
+	int tmp;
+
+	val = readl(ctl_addr) & ~scpd->data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
+	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
+		/*
+		 * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
+		 * MT7622_POWER_DOMAIN_WB and thus just a trivial setup
+		 * is applied here.
+		 */
+		usleep_range(12000, 12100);
+	} else {
+		/* Either wait until SRAM_PDN_ACK all 1 or 0 */
+		int ret = readl_poll_timeout(ctl_addr, tmp,
+				(tmp & pdn_ack) == 0,
+				MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (scpd->data->sram_iso_ctrl)	{
+		val = readl(ctl_addr) | PWR_SRAM_ISOINT_B_BIT;
+		writel(val, ctl_addr);
+		udelay(1);
+		val &= ~PWR_SRAM_CLKISO_BIT;
+		writel(val, ctl_addr);
+	}
+
+	return 0;
+}
+
+static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
+{
+	u32 val;
+	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
+	int tmp;
+
+	if (scpd->data->sram_iso_ctrl)	{
+		val = readl(ctl_addr);
+		val |= PWR_SRAM_CLKISO_BIT;
+		writel(val, ctl_addr);
+		val &= ~PWR_SRAM_ISOINT_B_BIT;
+		writel(val, ctl_addr);
+		udelay(1);
+	}
+
+	val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* Either wait until SRAM_PDN_ACK all 1 or 0 */
+	return readl_poll_timeout(ctl_addr, tmp,
+			(tmp & pdn_ack) == pdn_ack,
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+static int scpsys_bus_protect_enable(struct scp_domain *scpd)
+{
+	struct scp *scp = scpd->scp;
+	int ret = 0;
+
+	if (scpd->data->bus_prot_mask) {
+		ret = mtk_infracfg_set_bus_protection(scp->infracfg,
+				scpd->data->bus_prot_mask,
+				scp->bus_prot_reg_update);
+	} else if (scpd->data->bp_table[0].mask) {
+		ret = mtk_scpsys_ext_set_bus_protection(scpd->data->bp_table,
+				scp->infracfg,
+				scp->smi_common);
+	}
+
+	return ret;
+}
+
+static int scpsys_bus_protect_disable(struct scp_domain *scpd)
+{
+	struct scp *scp = scpd->scp;
+	int ret = 0;
+
+	if (scpd->data->bus_prot_mask) {
+		ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
+				scpd->data->bus_prot_mask,
+				scp->bus_prot_reg_update);
+	} else if (scpd->data->bp_table[0].mask) {
+		ret = mtk_scpsys_ext_clear_bus_protection(
+				scpd->data->bp_table,
+				scp->infracfg,
+				scp->smi_common);
+	}
+
+	return ret;
+}
+
 static int scpsys_power_on(struct generic_pm_domain *genpd)
 {
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
 	struct scp *scp = scpd->scp;
 	void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
-	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
-	int i;
 
-	if (scpd->supply) {
-		ret = regulator_enable(scpd->supply);
-		if (ret)
-			return ret;
-	}
-
-	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) {
-		ret = clk_prepare_enable(scpd->clk[i]);
-		if (ret) {
-			for (--i; i >= 0; i--)
-				clk_disable_unprepare(scpd->clk[i]);
+	ret = scpsys_regulator_enable(scpd);
+	if (ret < 0)
+		return ret;
 
-			goto err_clk;
-		}
-	}
+	ret = scpsys_clk_enable(scpd->clk, MAX_CLKS);
+	if (ret)
+		goto err_clk;
 
+	/* subsys power on */
 	val = readl(ctl_addr);
 	val |= PWR_ON_BIT;
 	writel(val, ctl_addr);
@@ -235,43 +390,26 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	val &= ~scpd->data->sram_pdn_bits;
-	writel(val, ctl_addr);
-
-	/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
-	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
-		/*
-		 * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
-		 * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is
-		 * applied here.
-		 */
-		usleep_range(12000, 12100);
+	ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+	if (ret < 0)
+		goto err_pwr_ack;
 
-	} else {
-		ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0,
-					 MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
-		if (ret < 0)
-			goto err_pwr_ack;
-	}
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_sram;
 
-	if (scpd->data->bus_prot_mask) {
-		ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
-				scpd->data->bus_prot_mask,
-				scp->bus_prot_reg_update);
-		if (ret)
-			goto err_pwr_ack;
-	}
+	ret = scpsys_bus_protect_disable(scpd);
+	if (ret < 0)
+		goto err_sram;
 
 	return 0;
 
+err_sram:
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 err_pwr_ack:
-	for (i = MAX_CLKS - 1; i >= 0; i--) {
-		if (scpd->clk[i])
-			clk_disable_unprepare(scpd->clk[i]);
-	}
+	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
-	if (scpd->supply)
-		regulator_disable(scpd->supply);
+	scpsys_regulator_disable(scpd);
 
 	dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name);
 
@@ -283,29 +421,21 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
 	struct scp *scp = scpd->scp;
 	void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
-	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
-	int i;
-
-	if (scpd->data->bus_prot_mask) {
-		ret = mtk_infracfg_set_bus_protection(scp->infracfg,
-				scpd->data->bus_prot_mask,
-				scp->bus_prot_reg_update);
-		if (ret)
-			goto out;
-	}
 
-	val = readl(ctl_addr);
-	val |= scpd->data->sram_pdn_bits;
-	writel(val, ctl_addr);
+	ret = scpsys_bus_protect_enable(scpd);
+	if (ret < 0)
+		goto out;
 
-	/* wait until SRAM_PDN_ACK all 1 */
-	ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack,
-				 MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+	ret = scpsys_sram_disable(scpd, ctl_addr);
 	if (ret < 0)
 		goto out;
 
+	ret = scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
+	/* subsys power off */
+	val = readl(ctl_addr);
 	val |= PWR_ISO_BIT;
 	writel(val, ctl_addr);
 
@@ -327,11 +457,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
-	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++)
-		clk_disable_unprepare(scpd->clk[i]);
+	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 
-	if (scpd->supply)
-		regulator_disable(scpd->supply);
+	scpsys_regulator_disable(scpd);
 
 	return 0;
 
@@ -341,6 +469,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	return ret;
 }
 
+static int init_subsys_clks(struct platform_device *pdev,
+		const char *prefix, struct clk **clk)
+{
+	struct device_node *node = pdev->dev.of_node;
+	u32 prefix_len, sub_clk_cnt = 0;
+	struct property *prop;
+	const char *clk_name;
+
+	if (!node) {
+		dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+			PTR_ERR(node));
+		return PTR_ERR(node);
+	}
+
+	prefix_len = strlen(prefix);
+
+	of_property_for_each_string(node, "clock-names", prop, clk_name) {
+		if (!strncmp(clk_name, prefix, prefix_len) &&
+				(clk_name[prefix_len] == '-')) {
+			if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+				dev_err(&pdev->dev,
+					"subsys clk out of range %d\n",
+					sub_clk_cnt);
+				return -ENOMEM;
+			}
+
+			clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+						clk_name);
+
+			if (IS_ERR(clk)) {
+				dev_err(&pdev->dev,
+					"Subsys clk read fail %ld\n",
+					PTR_ERR(clk));
+				return PTR_ERR(clk);
+			}
+			sub_clk_cnt++;
+		}
+	}
+
+	return sub_clk_cnt;
+}
+
 static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
@@ -396,6 +566,17 @@ static struct scp *init_scp(struct platform_device *pdev,
 		return ERR_CAST(scp->infracfg);
 	}
 
+	scp->smi_common = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+			"smi_comm");
+
+	if (scp->smi_common == ERR_PTR(-ENODEV)) {
+		scp->smi_common = NULL;
+	} else if (IS_ERR(scp->smi_common)) {
+		dev_err(&pdev->dev, "Cannot find smi_common controller: %ld\n",
+				PTR_ERR(scp->smi_common));
+		return ERR_CAST(scp->smi_common);
+	}
+
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];
 		const struct scp_domain_data *data = &scp_domain_data[i];
@@ -417,22 +598,43 @@ static struct scp *init_scp(struct platform_device *pdev,
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
 		const struct scp_domain_data *data = &scp_domain_data[i];
+		int clk_cnt;
 
 		pd_data->domains[i] = genpd;
 		scpd->scp = scp;
 
 		scpd->data = data;
 
-		for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
-			struct clk *c = clk[data->clk_id[j]];
+		if (data->clk_id[0]) {
+			for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
+				struct clk *c = clk[data->clk_id[j]];
 
-			if (IS_ERR(c)) {
-				dev_err(&pdev->dev, "%s: clk unavailable\n",
-					data->name);
-				return ERR_CAST(c);
+				if (IS_ERR(c)) {
+					dev_err(&pdev->dev,
+						"%s: clk unavailable\n",
+						data->name);
+					return ERR_CAST(c);
+				}
+
+				scpd->clk[j] = c;
 			}
+		} else if (data->basic_clk_name[0]) {
+			for (j = 0; j < MAX_CLKS &&
+					data->basic_clk_name[j]; j++)
+				scpd->clk[j] = devm_clk_get(&pdev->dev,
+						data->basic_clk_name[j]);
+		}
 
-			scpd->clk[j] = c;
+		if (data->subsys_clk_prefix) {
+			clk_cnt = init_subsys_clks(pdev,
+					data->subsys_clk_prefix,
+					scpd->subsys_clk);
+			if (clk_cnt < 0) {
+				dev_err(&pdev->dev,
+					"%s: subsys clk unavailable\n",
+					data->name);
+				return ERR_PTR(clk_cnt);
+			}
 		}
 
 		genpd->name = data->name;
diff --git a/include/linux/soc/mediatek/scpsys-ext.h b/include/linux/soc/mediatek/scpsys-ext.h
new file mode 100644
index 000000000000..d0ed295c88a7
--- /dev/null
+++ b/include/linux/soc/mediatek/scpsys-ext.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_MEDIATEK_SCPSYS_EXT_H
+#define __SOC_MEDIATEK_SCPSYS_EXT_H
+
+#define MAX_STEPS	4
+
+#define BUS_PROT(_type, _set_ofs, _clr_ofs,			\
+		_en_ofs, _sta_ofs, _mask, _clr_ack_mask) {	\
+		.type = _type,					\
+		.set_ofs = _set_ofs,				\
+		.clr_ofs = _clr_ofs,				\
+		.en_ofs = _en_ofs,				\
+		.sta_ofs = _sta_ofs,				\
+		.mask = _mask,					\
+		.clr_ack_mask = _clr_ack_mask,			\
+	}
+
+enum regmap_type {
+	IFR_TYPE,
+	SMI_TYPE,
+	MAX_REGMAP_TYPE,
+};
+
+struct bus_prot {
+	enum regmap_type type;
+	u32 set_ofs;
+	u32 clr_ofs;
+	u32 en_ofs;
+	u32 sta_ofs;
+	u32 mask;
+	u32 clr_ack_mask;
+};
+
+int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common);
+int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table,
+	struct regmap *infracfg, struct regmap *smi_common);
+
+#endif /* __SOC_MEDIATEK_SCPSYS_EXT_H */
-- 
2.18.0


  parent reply	other threads:[~2019-02-01  8:30 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-01  8:30 [PATCH v4 00/12] Mediatek MT8183 clock and scpsys support Weiyi Lu
2019-02-01  8:30 ` Weiyi Lu
2019-02-20 19:18   ` Stephen Boyd
2019-02-21  8:36     ` Matthias Brugger
2019-02-22  7:48       ` Stephen Boyd
2019-02-26  4:00         ` Weiyi Lu
2019-02-26 17:45           ` Stephen Boyd
2019-02-01  8:30 ` [PATCH v4 01/12] clk: mediatek: Disable tuner_en before change PLL rate Weiyi Lu
2019-02-26 15:59   ` Matthias Brugger
2019-02-27  3:51     ` Weiyi Lu
2019-02-27  4:39       ` Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 02/12] clk: mediatek: add new clkmux register API Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 03/12] clk: mediatek: add configurable pcwibits and fmin to mtk_pll_data Weiyi Lu
2019-02-01  8:30 ` Weiyi Lu [this message]
2019-02-08 18:30   ` [PATCH v4 04/12] soc: mediatek: add new flow for mtcmos power Matthias Brugger
2019-02-01  8:30 ` [PATCH v4 05/12] dt-bindings: ARM: Mediatek: Document bindings for MT8183 Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 06/12] clk: mediatek: Add dt-bindings for MT8183 clocks Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 07/12] clk: mediatek: Add flags support for mtk_gate data Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 08/12] clk: mediatek: Add MT8183 clock support Weiyi Lu
2019-02-26 17:50   ` Stephen Boyd
2019-02-27  2:51     ` Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 09/12] dt-bindings: soc: fix typo of MT8173 power dt-bindings Weiyi Lu
2019-02-07 15:35   ` Matthias Brugger
2019-02-01  8:30 ` [PATCH v4 10/12] dt-bindings: soc: Add MT8183 " Weiyi Lu
2019-02-08 18:33   ` Matthias Brugger
2019-02-01  8:30 ` [PATCH v4 11/12] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2019-02-01  8:30 ` [PATCH v4 12/12] clk: mediatek: Allow changing PLL rate when it is off Weiyi Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190201083016.25856-6-weiyi.lu@mediatek.com \
    --to=weiyi.lu@mediatek.com \
    --cc=drinkcat@chromium.org \
    --cc=fan.chen@mediatek.com \
    --cc=jamesjj.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mars.cheng@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=owen.chen@mediatek.com \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).