From: Rob Herring <robh@kernel.org>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: mazziesaccount@gmail.com, lee.jones@linaro.org,
mark.rutland@arm.com, lgirdwood@gmail.com, broonie@kernel.org,
gregkh@linuxfoundation.org, rafael@kernel.org,
mturquette@baylibre.com, sboyd@kernel.org,
linus.walleij@linaro.org, bgolaszewski@baylibre.com,
sre@kernel.org, a.zummo@towertech.it,
alexandre.belloni@bootlin.com, wim@linux-watchdog.org,
linux@roeck-us.net, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org,
mikko.mutanen@fi.rohmeurope.com,
heikki.haikola@fi.rohmeurope.com
Subject: Re: [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings
Date: Fri, 22 Feb 2019 18:30:41 -0600 [thread overview]
Message-ID: <20190223003041.GA16670@bogus> (raw)
In-Reply-To: <80de7a2b537ae3f414b0281736652256f38cf94c.1548149337.git.matti.vaittinen@fi.rohmeurope.com>
On Tue, Jan 22, 2019 at 11:45:38AM +0200, Matti Vaittinen wrote:
> Document bindings for regulators (3 bucks, 3 LDOs and 2 LED
> drivers) and 4 GPIO pins which can be configured for I/O or
> as interrupt sources withe configurable trigger levels.
'dt-bindings: mfd: ...' for the subject.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
> .../devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 104 +++++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> new file mode 100644
> index 000000000000..21801440a53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> @@ -0,0 +1,104 @@
> +* ROHM BD70528 Power Management Integrated Circuit bindings
> +
> +BD70528MWV is an ultra-low Iq general purpose single-chip power management IC
> +for battery-powered portable devices. The IC integrates 3 ultra-low current
> +consumption buck converters, 3 LDOs and 2 LED Drivers. Also included are 4
> +GPIOs, a real-time clock (RTC), a 32kHz clock gate, high-accuracy VREF
> +for use with an external ADC, flexible dual-input power path, 10 bits SAR ADC
> +for battery temperature monitor and 1S battery charger with scalable charge
> +currents.
> +
> +Required properties:
> + - compatible : Should be "rohm,bd70528"
> + - reg : I2C slave address.
> + - interrupt-parent : Phandle to the parent interrupt controller.
Don't need to document this. It is implied and could be in the parent.
> + - interrupts : The interrupt line the device is connected to.
> + - interrupt-controller : To indicate bd70528 acts as an interrupt controller.
> + - #interrupt-cells : Should be 2. usage is compliant to the 2 cells
> + variant of ../interrupt-controller/interrupts.txt
> + - gpio-controller : To indicate bd70528 acts as a gpio controller.
> + - #gpio-cells : Should be 2. The first cell is the pin number and
> + the second cell is used to specify flags. See
> + ../gpio/gpio.txt for more information.
> + - clock-frequency : Should be 32768
> + - #clock-cells : Should be 0.
> + - regulators: : List of child nodes that specify the regulators.
> + Please see ../regulator/rohm,bd70528-regulator.txt
> +
> +Optional properties:
> + - clock-output-names : Should contain name for output clock.
> +
> +Example:
> +/* external oscillator */
> +osc: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <1>;
> + clock-frequency = <32768>;
> + clock-output-names = "osc";
> +};
> +
> +pmic: bd70528@4b {
pmic@4b
> + compatible = "rohm,bd70528";
> + reg = <0x4b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 GPIO_ACTIVE_LOW>;
> + clocks = <&osc 0>;
> + #clock-cells = <0>;
> + clock-output-names = "bd70528-32k-out";
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "buck1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-ramp-delay = <125>;
> + };
> + buck2: BUCK2 {
> + regulator-name = "buck2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-ramp-delay = <125>;
> + };
> + buck3: BUCK3 {
> + regulator-name = "buck3";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-ramp-delay = <250>;
> + };
> + ldo1: LDO1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo2: LDO2 {
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo3: LDO3 {
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + led_ldo1: LED_LDO1 {
> + regulator-name = "led_ldo1";
> + regulator-min-microvolt = <200000>;
> + regulator-max-microvolt = <300000>;
> + };
> + led_ldo2: LED_LDO2 {
> + regulator-name = "led_ldo2";
> + regulator-min-microvolt = <200000>;
> + regulator-max-microvolt = <300000>;
> + };
> + };
> +};
> --
> 2.14.3
>
>
> --
> Matti Vaittinen
> ROHM Semiconductors
>
> ~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~
next prev parent reply other threads:[~2019-02-23 0:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 9:41 [RFC PATCH v1 00/13] support ROHM BD70528 PMIC Matti Vaittinen
2019-01-22 9:42 ` [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support Matti Vaittinen
2019-01-23 15:55 ` Mark Brown
2019-01-22 9:42 ` [RFC PATCH v1 02/13] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts Matti Vaittinen
2019-01-22 9:43 ` [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs Matti Vaittinen
2019-01-23 15:51 ` Mark Brown
2019-01-24 7:16 ` Matti Vaittinen
2019-01-24 10:24 ` Mark Brown
2019-01-22 9:44 ` [RFC PATCH v1 04/13] clk: bd718x7: " Matti Vaittinen
2019-01-22 9:44 ` [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core Matti Vaittinen
2019-01-22 14:51 ` Guenter Roeck
2019-01-22 16:20 ` Matti Vaittinen
2019-01-22 9:45 ` [RFC PATCH v1 06/13] clk: bd718x7: Support ROHM BD70528 clk block Matti Vaittinen
2019-01-22 9:45 ` [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings Matti Vaittinen
2019-02-23 0:30 ` Rob Herring [this message]
2019-02-28 6:49 ` Matti Vaittinen
2019-02-28 15:37 ` Rob Herring
2019-01-22 9:46 ` [RFC PATCH v1 08/13] regulator: bd70528: Support ROHM BD70528 regulator block Matti Vaittinen
2019-01-22 9:46 ` [RFC PATCH v1 09/13] devicetree: bindings: ROHM bd70528 regulator bindings Matti Vaittinen
2019-01-22 9:47 ` [RFC PATCH v1 10/13] gpio: Initial support for ROHM bd70528 GPIO block Matti Vaittinen
2019-01-22 9:47 ` [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC Matti Vaittinen
2019-01-22 14:48 ` Guenter Roeck
2019-01-22 16:29 ` Matti Vaittinen
2019-01-22 9:48 ` [RFC PATCH v1 12/13] power: supply: Initial support for ROHM BD70528 PMIC charger block Matti Vaittinen
2019-01-22 9:48 ` [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block Matti Vaittinen
2019-01-22 15:47 ` Guenter Roeck
2019-01-22 17:10 ` Matti Vaittinen
2019-01-22 17:40 ` Guenter Roeck
2019-01-22 18:03 ` Matti Vaittinen
2019-01-23 17:47 ` Sebastian Reichel
2019-01-24 10:44 ` Matti Vaittinen
2019-01-24 14:37 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190223003041.GA16670@bogus \
--to=robh@kernel.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.haikola@fi.rohmeurope.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=mazziesaccount@gmail.com \
--cc=mikko.mutanen@fi.rohmeurope.com \
--cc=mturquette@baylibre.com \
--cc=rafael@kernel.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).