From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>,
linux-api@vger.kernel.org, Michal Hocko <mhocko@suse.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Tim Murray <timmurray@google.com>,
Joel Fernandes <joel@joelfernandes.org>,
Suren Baghdasaryan <surenb@google.com>,
Daniel Colascione <dancol@google.com>,
Shakeel Butt <shakeelb@google.com>,
Sonny Rao <sonnyrao@google.com>,
Brian Geffon <bgeffon@google.com>,
jannh@google.com, oleg@redhat.com, christian@brauner.io,
oleksandr@redhat.com, hdanton@sina.com,
Minchan Kim <minchan@kernel.org>
Subject: [RFCv2 4/6] mm: factor out madvise's core functionality
Date: Fri, 31 May 2019 15:43:11 +0900 [thread overview]
Message-ID: <20190531064313.193437-5-minchan@kernel.org> (raw)
In-Reply-To: <20190531064313.193437-1-minchan@kernel.org>
This patch factor out madvise's core functionality so that upcoming
patch can reuse it without duplication. It shouldn't change any behavior.
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
mm/madvise.c | 188 +++++++++++++++++++++++++++------------------------
1 file changed, 101 insertions(+), 87 deletions(-)
diff --git a/mm/madvise.c b/mm/madvise.c
index 9d749a1420b4..466623ea8c36 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -425,9 +425,10 @@ static int madvise_pageout_pte_range(pmd_t *pmd, unsigned long addr,
struct page *page;
int isolated = 0;
struct vm_area_struct *vma = walk->vma;
+ struct task_struct *task = walk->private;
unsigned long next;
- if (fatal_signal_pending(current))
+ if (fatal_signal_pending(task))
return -EINTR;
next = pmd_addr_end(addr, end);
@@ -505,12 +506,14 @@ static int madvise_pageout_pte_range(pmd_t *pmd, unsigned long addr,
}
static void madvise_pageout_page_range(struct mmu_gather *tlb,
- struct vm_area_struct *vma,
- unsigned long addr, unsigned long end)
+ struct task_struct *task,
+ struct vm_area_struct *vma,
+ unsigned long addr, unsigned long end)
{
struct mm_walk warm_walk = {
.pmd_entry = madvise_pageout_pte_range,
.mm = vma->vm_mm,
+ .private = task,
};
tlb_start_vma(tlb, vma);
@@ -519,9 +522,9 @@ static void madvise_pageout_page_range(struct mmu_gather *tlb,
}
-static long madvise_pageout(struct vm_area_struct *vma,
- struct vm_area_struct **prev,
- unsigned long start_addr, unsigned long end_addr)
+static long madvise_pageout(struct task_struct *task,
+ struct vm_area_struct *vma, struct vm_area_struct **prev,
+ unsigned long start_addr, unsigned long end_addr)
{
struct mm_struct *mm = vma->vm_mm;
struct mmu_gather tlb;
@@ -532,7 +535,7 @@ static long madvise_pageout(struct vm_area_struct *vma,
lru_add_drain();
tlb_gather_mmu(&tlb, mm, start_addr, end_addr);
- madvise_pageout_page_range(&tlb, vma, start_addr, end_addr);
+ madvise_pageout_page_range(&tlb, task, vma, start_addr, end_addr);
tlb_finish_mmu(&tlb, start_addr, end_addr);
return 0;
@@ -744,7 +747,8 @@ static long madvise_dontneed_single_vma(struct vm_area_struct *vma,
return 0;
}
-static long madvise_dontneed_free(struct vm_area_struct *vma,
+static long madvise_dontneed_free(struct mm_struct *mm,
+ struct vm_area_struct *vma,
struct vm_area_struct **prev,
unsigned long start, unsigned long end,
int behavior)
@@ -756,8 +760,8 @@ static long madvise_dontneed_free(struct vm_area_struct *vma,
if (!userfaultfd_remove(vma, start, end)) {
*prev = NULL; /* mmap_sem has been dropped, prev is stale */
- down_read(¤t->mm->mmap_sem);
- vma = find_vma(current->mm, start);
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, start);
if (!vma)
return -ENOMEM;
if (start < vma->vm_start) {
@@ -804,7 +808,8 @@ static long madvise_dontneed_free(struct vm_area_struct *vma,
* Application wants to free up the pages and associated backing store.
* This is effectively punching a hole into the middle of a file.
*/
-static long madvise_remove(struct vm_area_struct *vma,
+static long madvise_remove(struct mm_struct *mm,
+ struct vm_area_struct *vma,
struct vm_area_struct **prev,
unsigned long start, unsigned long end)
{
@@ -838,13 +843,13 @@ static long madvise_remove(struct vm_area_struct *vma,
get_file(f);
if (userfaultfd_remove(vma, start, end)) {
/* mmap_sem was not released by userfaultfd_remove() */
- up_read(¤t->mm->mmap_sem);
+ up_read(&mm->mmap_sem);
}
error = vfs_fallocate(f,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
offset, end - start);
fput(f);
- down_read(¤t->mm->mmap_sem);
+ down_read(&mm->mmap_sem);
return error;
}
@@ -918,21 +923,23 @@ static int madvise_inject_error(int behavior,
#endif
static long
-madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
+madvise_vma(struct task_struct *task, struct mm_struct *mm,
+ struct vm_area_struct *vma, struct vm_area_struct **prev,
unsigned long start, unsigned long end, int behavior)
{
switch (behavior) {
case MADV_REMOVE:
- return madvise_remove(vma, prev, start, end);
+ return madvise_remove(mm, vma, prev, start, end);
case MADV_WILLNEED:
return madvise_willneed(vma, prev, start, end);
case MADV_COLD:
return madvise_cold(vma, prev, start, end);
case MADV_PAGEOUT:
- return madvise_pageout(vma, prev, start, end);
+ return madvise_pageout(task, vma, prev, start, end);
case MADV_FREE:
case MADV_DONTNEED:
- return madvise_dontneed_free(vma, prev, start, end, behavior);
+ return madvise_dontneed_free(mm, vma, prev, start,
+ end, behavior);
default:
return madvise_behavior(vma, prev, start, end, behavior);
}
@@ -976,68 +983,8 @@ madvise_behavior_valid(int behavior)
}
}
-/*
- * The madvise(2) system call.
- *
- * Applications can use madvise() to advise the kernel how it should
- * handle paging I/O in this VM area. The idea is to help the kernel
- * use appropriate read-ahead and caching techniques. The information
- * provided is advisory only, and can be safely disregarded by the
- * kernel without affecting the correct operation of the application.
- *
- * behavior values:
- * MADV_NORMAL - the default behavior is to read clusters. This
- * results in some read-ahead and read-behind.
- * MADV_RANDOM - the system should read the minimum amount of data
- * on any access, since it is unlikely that the appli-
- * cation will need more than what it asks for.
- * MADV_SEQUENTIAL - pages in the given range will probably be accessed
- * once, so they can be aggressively read ahead, and
- * can be freed soon after they are accessed.
- * MADV_WILLNEED - the application is notifying the system to read
- * some pages ahead.
- * MADV_DONTNEED - the application is finished with the given range,
- * so the kernel can free resources associated with it.
- * MADV_FREE - the application marks pages in the given range as lazy free,
- * where actual purges are postponed until memory pressure happens.
- * MADV_REMOVE - the application wants to free up the given range of
- * pages and associated backing store.
- * MADV_DONTFORK - omit this area from child's address space when forking:
- * typically, to avoid COWing pages pinned by get_user_pages().
- * MADV_DOFORK - cancel MADV_DONTFORK: no longer omit this area when forking.
- * MADV_WIPEONFORK - present the child process with zero-filled memory in this
- * range after a fork.
- * MADV_KEEPONFORK - undo the effect of MADV_WIPEONFORK
- * MADV_HWPOISON - trigger memory error handler as if the given memory range
- * were corrupted by unrecoverable hardware memory failure.
- * MADV_SOFT_OFFLINE - try to soft-offline the given range of memory.
- * MADV_MERGEABLE - the application recommends that KSM try to merge pages in
- * this area with pages of identical content from other such areas.
- * MADV_UNMERGEABLE- cancel MADV_MERGEABLE: no longer merge pages with others.
- * MADV_HUGEPAGE - the application wants to back the given range by transparent
- * huge pages in the future. Existing pages might be coalesced and
- * new pages might be allocated as THP.
- * MADV_NOHUGEPAGE - mark the given range as not worth being backed by
- * transparent huge pages so the existing pages will not be
- * coalesced into THP and new pages will not be allocated as THP.
- * MADV_DONTDUMP - the application wants to prevent pages in the given range
- * from being included in its core dump.
- * MADV_DODUMP - cancel MADV_DONTDUMP: no longer exclude from core dump.
- *
- * return values:
- * zero - success
- * -EINVAL - start + len < 0, start is not page-aligned,
- * "behavior" is not a valid value, or application
- * is attempting to release locked or shared pages,
- * or the specified address range includes file, Huge TLB,
- * MAP_SHARED or VMPFNMAP range.
- * -ENOMEM - addresses in the specified range are not currently
- * mapped, or are outside the AS of the process.
- * -EIO - an I/O error occurred while paging in data.
- * -EBADF - map exists, but area maps something that isn't a file.
- * -EAGAIN - a kernel resource was temporarily unavailable.
- */
-SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
+static int madvise_core(struct task_struct *task, struct mm_struct *mm,
+ unsigned long start, size_t len_in, int behavior)
{
unsigned long end, tmp;
struct vm_area_struct *vma, *prev;
@@ -1068,15 +1015,16 @@ SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
#ifdef CONFIG_MEMORY_FAILURE
if (behavior == MADV_HWPOISON || behavior == MADV_SOFT_OFFLINE)
- return madvise_inject_error(behavior, start, start + len_in);
+ return madvise_inject_error(behavior,
+ start, start + len_in);
#endif
write = madvise_need_mmap_write(behavior);
if (write) {
- if (down_write_killable(¤t->mm->mmap_sem))
+ if (down_write_killable(&mm->mmap_sem))
return -EINTR;
} else {
- down_read(¤t->mm->mmap_sem);
+ down_read(&mm->mmap_sem);
}
/*
@@ -1084,7 +1032,7 @@ SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
* ranges, just ignore them, but return -ENOMEM at the end.
* - different from the way of handling in mlock etc.
*/
- vma = find_vma_prev(current->mm, start, &prev);
+ vma = find_vma_prev(mm, start, &prev);
if (vma && start > vma->vm_start)
prev = vma;
@@ -1109,7 +1057,7 @@ SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
tmp = end;
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
- error = madvise_vma(vma, &prev, start, tmp, behavior);
+ error = madvise_vma(task, mm, vma, &prev, start, tmp, behavior);
if (error)
goto out;
start = tmp;
@@ -1121,14 +1069,80 @@ SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
if (prev)
vma = prev->vm_next;
else /* madvise_remove dropped mmap_sem */
- vma = find_vma(current->mm, start);
+ vma = find_vma(mm, start);
}
out:
blk_finish_plug(&plug);
if (write)
- up_write(¤t->mm->mmap_sem);
+ up_write(&mm->mmap_sem);
else
- up_read(¤t->mm->mmap_sem);
+ up_read(&mm->mmap_sem);
return error;
}
+
+/*
+ * The madvise(2) system call.
+ *
+ * Applications can use madvise() to advise the kernel how it should
+ * handle paging I/O in this VM area. The idea is to help the kernel
+ * use appropriate read-ahead and caching techniques. The information
+ * provided is advisory only, and can be safely disregarded by the
+ * kernel without affecting the correct operation of the application.
+ *
+ * behavior values:
+ * MADV_NORMAL - the default behavior is to read clusters. This
+ * results in some read-ahead and read-behind.
+ * MADV_RANDOM - the system should read the minimum amount of data
+ * on any access, since it is unlikely that the appli-
+ * cation will need more than what it asks for.
+ * MADV_SEQUENTIAL - pages in the given range will probably be accessed
+ * once, so they can be aggressively read ahead, and
+ * can be freed soon after they are accessed.
+ * MADV_WILLNEED - the application is notifying the system to read
+ * some pages ahead.
+ * MADV_DONTNEED - the application is finished with the given range,
+ * so the kernel can free resources associated with it.
+ * MADV_FREE - the application marks pages in the given range as lazy free,
+ * where actual purges are postponed until memory pressure happens.
+ * MADV_REMOVE - the application wants to free up the given range of
+ * pages and associated backing store.
+ * MADV_DONTFORK - omit this area from child's address space when forking:
+ * typically, to avoid COWing pages pinned by get_user_pages().
+ * MADV_DOFORK - cancel MADV_DONTFORK: no longer omit this area when forking.
+ * MADV_WIPEONFORK - present the child process with zero-filled memory in this
+ * range after a fork.
+ * MADV_KEEPONFORK - undo the effect of MADV_WIPEONFORK
+ * MADV_HWPOISON - trigger memory error handler as if the given memory range
+ * were corrupted by unrecoverable hardware memory failure.
+ * MADV_SOFT_OFFLINE - try to soft-offline the given range of memory.
+ * MADV_MERGEABLE - the application recommends that KSM try to merge pages in
+ * this area with pages of identical content from other such areas.
+ * MADV_UNMERGEABLE- cancel MADV_MERGEABLE: no longer merge pages with others.
+ * MADV_HUGEPAGE - the application wants to back the given range by transparent
+ * huge pages in the future. Existing pages might be coalesced and
+ * new pages might be allocated as THP.
+ * MADV_NOHUGEPAGE - mark the given range as not worth being backed by
+ * transparent huge pages so the existing pages will not be
+ * coalesced into THP and new pages will not be allocated as THP.
+ * MADV_DONTDUMP - the application wants to prevent pages in the given range
+ * from being included in its core dump.
+ * MADV_DODUMP - cancel MADV_DONTDUMP: no longer exclude from core dump.
+ *
+ * return values:
+ * zero - success
+ * -EINVAL - start + len < 0, start is not page-aligned,
+ * "behavior" is not a valid value, or application
+ * is attempting to release locked or shared pages,
+ * or the specified address range includes file, Huge TLB,
+ * MAP_SHARED or VMPFNMAP range.
+ * -ENOMEM - addresses in the specified range are not currently
+ * mapped, or are outside the AS of the process.
+ * -EIO - an I/O error occurred while paging in data.
+ * -EBADF - map exists, but area maps something that isn't a file.
+ * -EAGAIN - a kernel resource was temporarily unavailable.
+ */
+SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
+{
+ return madvise_core(current, current->mm, start, len_in, behavior);
+}
--
2.22.0.rc1.257.g3120a18244-goog
next prev parent reply other threads:[~2019-05-31 6:43 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 6:43 [RFCv2 0/6] introduce memory hinting API for external process Minchan Kim
2019-05-31 6:43 ` [RFCv2 1/6] mm: introduce MADV_COLD Minchan Kim
2019-05-31 8:47 ` Michal Hocko
2019-05-31 13:39 ` Minchan Kim
2019-05-31 14:03 ` Michal Hocko
2019-05-31 14:34 ` Minchan Kim
2019-06-03 7:16 ` Michal Hocko
2019-06-03 15:43 ` Daniel Colascione
2019-06-03 17:27 ` Johannes Weiner
2019-06-03 20:32 ` Michal Hocko
2019-06-03 21:50 ` Johannes Weiner
2019-06-03 23:02 ` Minchan Kim
2019-06-04 6:56 ` Michal Hocko
2019-06-04 12:06 ` Johannes Weiner
2019-06-04 6:55 ` Michal Hocko
2019-06-04 4:26 ` Minchan Kim
2019-06-04 7:02 ` Michal Hocko
2019-05-31 6:43 ` [RFCv2 2/6] mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM Minchan Kim
2019-05-31 6:43 ` [RFCv2 3/6] mm: introduce MADV_PAGEOUT Minchan Kim
2019-05-31 8:50 ` Michal Hocko
2019-05-31 13:44 ` Minchan Kim
2019-05-31 16:59 ` Johannes Weiner
2019-05-31 23:14 ` Minchan Kim
2019-05-31 6:43 ` Minchan Kim [this message]
2019-05-31 7:04 ` [RFCv2 4/6] mm: factor out madvise's core functionality Oleksandr Natalenko
2019-05-31 13:12 ` Minchan Kim
2019-05-31 14:35 ` Oleksandr Natalenko
2019-05-31 23:29 ` Minchan Kim
2019-06-05 13:27 ` Oleksandr Natalenko
2019-06-10 10:12 ` Minchan Kim
2019-05-31 6:43 ` [RFCv2 5/6] mm: introduce external memory hinting API Minchan Kim
2019-05-31 8:37 ` Michal Hocko
2019-05-31 13:19 ` Minchan Kim
2019-05-31 14:00 ` Michal Hocko
2019-05-31 14:11 ` Minchan Kim
2019-05-31 17:35 ` Daniel Colascione
2019-05-31 6:43 ` [RFCv2 6/6] mm: extend process_madvise syscall to support vector arrary Minchan Kim
2019-05-31 10:06 ` Yann Droneaud
2019-05-31 23:18 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190531064313.193437-5-minchan@kernel.org \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bgeffon@google.com \
--cc=christian@brauner.io \
--cc=dancol@google.com \
--cc=hannes@cmpxchg.org \
--cc=hdanton@sina.com \
--cc=jannh@google.com \
--cc=joel@joelfernandes.org \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=oleg@redhat.com \
--cc=oleksandr@redhat.com \
--cc=shakeelb@google.com \
--cc=sonnyrao@google.com \
--cc=surenb@google.com \
--cc=timmurray@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).