From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
stefan@agner.ch, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
Fabio Estevam <festevam@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 22/22] ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board
Date: Tue, 30 Jul 2019 16:46:49 +0200 [thread overview]
Message-ID: <20190730144649.19022-23-dev@pschenker.ch> (raw)
In-Reply-To: <20190730144649.19022-1-dev@pschenker.ch>
From: Philippe Schenker <philippe.schenker@toradex.com>
This adds the common touchscreens that are used with Toradex's
Eval Boards.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
.../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index d3c4809f140e..cd72d3decf6a 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -112,6 +112,34 @@
&i2c1 {
status = "okay";
+ /*
+ * the PCAPs use SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm5,
+ * pwm6. so if you enable one of the PCAP controllers disable the pwms
+ */
+ atmel_mxt_ts: atmel_mxt_ts@4a {
+ compatible = "atmel,maxtouch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiotouch>;
+ reg = <0x4a>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */
+ status = "disabled";
+ };
+
+ touch: touchrevf0710a@10 {
+ compatible = "touchrevolution,fusion-f0710a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiotouch>;
+ reg = <0x10>;
+ /* SODIMM 28, Pen down interrupt */
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH
+ /* SODIMM 30, Reset interrupt */
+ &gpio2 5 GPIO_ACTIVE_LOW
+ >;
+ status = "disabled";
+ };
+
/* M41T0M6 real time clock on carrier board */
m41t0m6: rtc@68 {
compatible = "st,m41t0";
@@ -188,3 +216,12 @@
sd-uhs-sdr104;
status = "okay";
};
+
+&iomuxc {
+ pinctrl_gpiotouch: touchgpios {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x74
+ MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x14
+ >;
+ };
+};
--
2.22.0
prev parent reply other threads:[~2019-07-30 14:56 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 14:46 [PATCH 00/22] This patchset holds some common changes that were never upstreamed Philippe Schenker
2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-30 14:46 ` [PATCH 02/22] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-30 14:46 ` [PATCH 03/22] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-30 14:46 ` [PATCH 04/22] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-30 14:46 ` [PATCH 05/22] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-30 14:46 ` [PATCH 06/22] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-07-30 14:46 ` [PATCH 07/22] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-30 14:46 ` [PATCH 08/22] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-30 14:46 ` [PATCH 09/22] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-30 14:46 ` [PATCH 10/22] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-30 14:46 ` [PATCH 11/22] ARM: dts: imx6: Add sleep state to can interfaces Philippe Schenker
2019-07-31 7:14 ` Michal Vokáč
2019-07-31 11:13 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-30 20:46 ` Fabio Estevam
2019-07-31 6:43 ` Philippe Schenker
2019-07-31 6:54 ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 13/22] ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-31 7:09 ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 14/22] ARM: dts: apalis-imx6: Add some example I2C devices Philippe Schenker
2019-07-30 20:53 ` Fabio Estevam
2019-07-31 11:36 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 15/22] ARM: dts: apalis-imx6: Add some optional " Philippe Schenker
2019-07-30 20:43 ` Fabio Estevam
2019-07-31 11:37 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 16/22] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-30 14:46 ` [PATCH 17/22] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-30 14:46 ` [PATCH 18/22] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-30 14:46 ` [PATCH 19/22] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-30 14:46 ` [PATCH 20/22] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-30 14:46 ` [PATCH 21/22] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190730144649.19022-23-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).