linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: tdas@codeaurora.org, viresh.kumar@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, vkoul@kernel.org,
	bjorn.andersson@linaro.org, amit.kucheria@linaro.org,
	rjw@rjwysocki.net, agross@kernel.org,
	Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH] cpufreq: qcom-hw: Update logic to detect turbo frequency
Date: Wed,  7 Aug 2019 17:15:43 +0530	[thread overview]
Message-ID: <20190807114543.7187-1-sibis@codeaurora.org> (raw)

The core count read back from the each domain's look up table serves
as an indicator for the onset of the turbo frequency and not accurate
representation of number of cores in a paticular domain. Update turbo
detection logic accordingly to add support for SM8150 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

Source Referenoce:
CAF msm-4.14:
https://source.codeaurora.org/quic/la/kernel/msm-4.14/tree/drivers/clk/qcom/clk-cpu-osm.c?h=LA.UM.7.1.r1-14000-sm8150.0#n666

 drivers/cpufreq/qcom-cpufreq-hw.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 4b0b50403901b..6b456cd67b767 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -20,6 +20,7 @@
 #define LUT_VOLT			GENMASK(11, 0)
 #define LUT_ROW_SIZE			32
 #define CLK_HW_DIV			2
+#define LUT_TURBO_IND			1
 
 /* Register offsets */
 #define REG_ENABLE			0x0
@@ -79,7 +80,6 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 {
 	u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq;
 	u32 volt;
-	unsigned int max_cores = cpumask_weight(policy->cpus);
 	struct cpufreq_frequency_table	*table;
 
 	table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
@@ -102,12 +102,12 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		else
 			freq = cpu_hw_rate / 1000;
 
-		if (freq != prev_freq && core_count == max_cores) {
+		if (freq != prev_freq && core_count != LUT_TURBO_IND) {
 			table[i].frequency = freq;
 			dev_pm_opp_add(cpu_dev, freq * 1000, volt);
 			dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
 				freq, core_count);
-		} else {
+		} else if (core_count == LUT_TURBO_IND) {
 			table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		}
 
@@ -115,14 +115,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		 * Two of the same frequencies with the same core counts means
 		 * end of table
 		 */
-		if (i > 0 && prev_freq == freq && prev_cc == core_count) {
+		if (i > 0 && prev_freq == freq) {
 			struct cpufreq_frequency_table *prev = &table[i - 1];
 
 			/*
 			 * Only treat the last frequency that might be a boost
 			 * as the boost frequency
 			 */
-			if (prev_cc != max_cores) {
+			if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
 				prev->frequency = prev_freq;
 				prev->flags = CPUFREQ_BOOST_FREQ;
 				dev_pm_opp_add(cpu_dev,	prev_freq * 1000, volt);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply	other threads:[~2019-08-07 11:45 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-07 11:45 Sibi Sankar [this message]
2019-08-19  6:54 ` [PATCH] cpufreq: qcom-hw: Update logic to detect turbo frequency Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190807114543.7187-1-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=amit.kucheria@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=tdas@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).