From: Masami Hiramatsu <mhiramat@kernel.org>
To: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
Linux Next Mailing List <linux-next@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Randy Dunlap <rdunlap@infradead.org>
Subject: Re: linux-next: Tree for Aug 27 (objtool)
Date: Fri, 30 Aug 2019 15:23:51 +0900 [thread overview]
Message-ID: <20190830152351.9311610b5cffb93110cbd6da@kernel.org> (raw)
In-Reply-To: <20190829175931.sru23aud33hrdqbj@treble>
Hi Josh,
On Thu, 29 Aug 2019 12:59:31 -0500
Josh Poimboeuf <jpoimboe@redhat.com> wrote:
> On Thu, Aug 29, 2019 at 10:53:56AM +0900, Masami Hiramatsu wrote:
> > Hi Josh,
> >
> > On Wed, 28 Aug 2019 11:34:33 -0500
> > Josh Poimboeuf <jpoimboe@redhat.com> wrote:
> >
> > > On Wed, Aug 28, 2019 at 11:13:31AM -0500, Josh Poimboeuf wrote:
> > > > Turns out this patch does break something:
> > > >
> > > > arch/x86/xen/enlighten_pv.o: warning: objtool: xen_cpuid()+0x25: can't find jump dest instruction at .text+0x9c
> > > >
> > > > I'll need to figure out a better way to whitelist that
> > > > XEN_EMULATE_PREFIX fake instruction thing. I'll probably just teach
> > > > the objtool decoder about it.
> > >
> > > Hi Masami,
> > >
> > > Is it possible for the kernel x86 decoder to recognize the
> > > XEN_EMULATE_PREFIX prefix?
> > >
> > > asm(XEN_EMULATE_PREFIX "cpuid"
> > > : "=a" (*ax),
> > > "=b" (*bx),
> > > "=c" (*cx),
> > > "=d" (*dx)
> > > : "0" (*ax), "2" (*cx));
> > >
> > > is disassembled to:
> > >
> > > 33: 0f 0b ud2
> > > 35: 78 65 js 9c <xen_store_tr+0xc>
> > > 37: 6e outsb %ds:(%rsi),(%dx)
> > > 38: 0f a2 cpuid
> > >
> > > which confuses objtool. Presumably that would confuse other users of
> > > the decoder as well.
> >
> > Good catch! It should be problematic, since x86 decoder sanity test is
> > based on objtool.
>
> I think you mean the decoder test is based on objdump, not objtool?
Yes, it was my mistake. It depends on objdump.
> Actually I wonder if X86_DECODER_SELFTEST is even still needed these
> days, since objtool is enabled on default configs. Objtool already uses
> the decoder to disassemble every instruction in the kernel (except for a
> few whitelisted files).
Sometimes it have found bugs, so I would like to keep it. That test runs
build time and in-kernel decoder is somewhat critical. It is better to
run a test before install it.
>
> > But I don't want to change the test code itself,
> > because this problem is highly depending on Xen.
> >
> > > That's a highly unlikely sequence of instructions, maybe the kernel
> > > decoder should recognize it as a single instruction.
> >
> > OK, it is better to be done in decoder (only for CONFIG_XEN_PVHVM)
> >
> > BTW, could you also share what test case would you using?
>
> Enable CONFIG_XEN_PV and CONFIG_STACK_VALIDATION, and remove the
> STACK_FRAME_NON_STANDARD(xen_cpuid) line from
> arch/x86/xen/enlighten_pv.c. objtool will complain:
>
> arch/x86/xen/enlighten_pv.o: warning: objtool: xen_cpuid()+0x25: can't find jump dest instruction at .text+0x9c
Ah, OK, so that is for objtool, not for in-kernel decoder (anyway both
need the fix.)
> Basing it on CONFIG_XEN_PVHVM may be problematic. The decoder is
> duplicated in the tools directory so objtool can use it. But the tools
> don't know about kernel configs.
Yes, in that case you need enable it always.
> BTW, I'm not sure if you're aware of this, but both objtool and perf
> have identical copies of the decoder. The makefiles warn if they get
> out of sync with the kernel version.
>
> We will always need at least one copy of the decoder in tools, because
> the tools subdir is supposed to be standalone from the rest of the
> kernel. Still, I may look at combining the perf and objtool copies into
> a single shared copy.
Yes, we need to fix both.
>
> > And what about attached patch? (just compile checked with/without CONFIG_XEN_PVHVM)
>
> I copied the decoder to objtool, removed the CONFIG_XEN_PVHVM ifdef, and
> played a bit with the includes, and got it to compile with objtool, but
> it still fails:
>
> $ make arch/x86/xen/enlighten_pv.o
> arch/x86/xen/enlighten_pv.o: warning: objtool: xen_cpuid()+0x25: can't find jump dest instruction at .text+0x9c
[...]
> @@ -58,6 +60,30 @@ void insn_init(struct insn *insn, const void *kaddr, int buf_len, int x86_64)
> insn->addr_bytes = 4;
> }
>
> +static const insn_byte_t xen_prefix[] = { XEN_EMULATE_PREFIX };
Oops, this must be __XEN_EMULATE_PREFIX. Mine is also have same bug.
since insn_byte_t is char, that makes no error, but it should be
initialized with __XEN_EMULATE_PREFIX, not XEN_EMULATE_PREFIX.
Thank you,
--
Masami Hiramatsu <mhiramat@kernel.org>
next prev parent reply other threads:[~2019-08-30 6:24 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 9:05 linux-next: Tree for Aug 27 Stephen Rothwell
2019-08-27 15:18 ` linux-next: Tree for Aug 27 (amdgpu) Randy Dunlap
2019-08-27 15:41 ` Alex Deucher
2019-08-27 15:24 ` linux-next: Tree for Aug 27 (mshyperv.c) Randy Dunlap
2019-08-27 15:29 ` linux-next: Tree for Aug 27 (kunit) Randy Dunlap
2019-08-27 16:09 ` Brendan Higgins
2019-08-27 16:12 ` shuah
2019-08-27 15:37 ` linux-next: Tree for Aug 27 (mm/zsmalloc.c) Randy Dunlap
2019-08-28 5:30 ` Sergey Senozhatsky
2019-08-27 15:40 ` linux-next: Tree for Aug 27 (objtool) Randy Dunlap
2019-08-27 15:59 ` Josh Poimboeuf
2019-08-27 19:05 ` Randy Dunlap
2019-08-28 15:51 ` Josh Poimboeuf
2019-08-28 16:05 ` Randy Dunlap
2019-08-28 16:13 ` Josh Poimboeuf
2019-08-28 16:34 ` Josh Poimboeuf
2019-08-29 1:53 ` Masami Hiramatsu
2019-08-29 17:59 ` Josh Poimboeuf
2019-08-30 6:23 ` Masami Hiramatsu [this message]
2019-08-30 15:14 ` Masami Hiramatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190830152351.9311610b5cffb93110cbd6da@kernel.org \
--to=mhiramat@kernel.org \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rdunlap@infradead.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).