From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-unisoc@lists.infradead.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, orsonzhai@gmail.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 2/4] ARM: dts: Add RDA8810PL GPIO controllers
Date: Mon, 21 Oct 2019 12:14:11 +0530 [thread overview]
Message-ID: <20191021064413.19840-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20191021064413.19840-1-manivannan.sadhasivam@linaro.org>
Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers
in this SoC with maximum of 32 gpios. Except GPIOC, all controllers
are capable of generating edge/level interrupts from first 8 lines.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm/boot/dts/rda8810pl.dtsi | 48 ++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi
index 19cde895bf65..f30d6ece49fb 100644
--- a/arch/arm/boot/dts/rda8810pl.dtsi
+++ b/arch/arm/boot/dts/rda8810pl.dtsi
@@ -33,6 +33,21 @@
ranges;
};
+ modem@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0xfffffff>;
+
+ gpioc@1a08000 {
+ compatible = "rda,8810pl-gpio";
+ reg = <0x1a08000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ };
+ };
+
apb@20800000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -60,6 +75,39 @@
<17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hwtimer", "ostimer";
};
+
+ gpioa@30000 {
+ compatible = "rda,8810pl-gpio";
+ reg = <0x30000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpiob@31000 {
+ compatible = "rda,8810pl-gpio";
+ reg = <0x31000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpiod@32000 {
+ compatible = "rda,8810pl-gpio";
+ reg = <0x32000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
apb@20a00000 {
--
2.17.1
next prev parent reply other threads:[~2019-10-21 6:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 6:44 [PATCH v3 0/4] Add GPIO support for RDA8810PL SoC Manivannan Sadhasivam
2019-10-21 6:44 ` [PATCH v3 1/4] dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO controller Manivannan Sadhasivam
2019-10-29 14:10 ` Linus Walleij
2019-10-21 6:44 ` Manivannan Sadhasivam [this message]
2019-10-29 14:11 ` [PATCH v3 2/4] ARM: dts: Add RDA8810PL GPIO controllers Linus Walleij
2019-10-21 6:44 ` [PATCH v3 3/4] gpio: Add RDA Micro GPIO controller support Manivannan Sadhasivam
2019-10-22 9:02 ` Bartosz Golaszewski
2019-10-29 14:13 ` Linus Walleij
2019-10-21 6:44 ` [PATCH v3 4/4] MAINTAINERS: Add entry for RDA Micro GPIO driver and binding Manivannan Sadhasivam
2019-10-29 14:15 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191021064413.19840-3-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-unisoc@lists.infradead.org \
--cc=orsonzhai@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).