From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: "Tian, Kevin" <kevin.tian@intel.com>
Cc: "iommu@lists.linux-foundation.org"
<iommu@lists.linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
"David Woodhouse" <dwmw2@infradead.org>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe@linaro.com>,
"Liu, Yi L" <yi.l.liu@intel.com>,
"Raj, Ashok" <ashok.raj@intel.com>,
Christoph Hellwig <hch@infradead.org>,
Lu Baolu <baolu.lu@linux.intel.com>,
Jonathan Cameron <jic23@kernel.org>,
Eric Auger <eric.auger@redhat.com>,
jacob.jun.pan@linux.intel.com
Subject: Re: [PATCH v7 04/11] iommu/vt-d: Replace Intel specific PASID allocator with IOASID
Date: Mon, 28 Oct 2019 15:46:11 -0700 [thread overview]
Message-ID: <20191028154611.5c9979fd@jacob-builder> (raw)
In-Reply-To: <AADFC41AFE54684AB9EE6CBC0274A5D19D5CDC87@SHSMSX104.ccr.corp.intel.com>
On Fri, 25 Oct 2019 06:41:16 +0000
"Tian, Kevin" <kevin.tian@intel.com> wrote:
> > From: Jacob Pan [mailto:jacob.jun.pan@linux.intel.com]
> > Sent: Friday, October 25, 2019 3:55 AM
> >
> > Make use of generic IOASID code to manage PASID allocation,
> > free, and lookup. Replace Intel specific code.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>
> better push this patch separately. It's a generic cleanup.
>
True but might be more efficient to have this cleanup patch paved way.
Since the follow up new guest SVA code uses the new API. So I wanted to
get rid of the old code completely.
> > ---
> > drivers/iommu/intel-iommu.c | 12 ++++++------
> > drivers/iommu/intel-pasid.c | 36
> > ------------------------------------ drivers/iommu/intel-svm.c |
> > 39 +++++++++++++++++++++++---------------- 3 files changed, 29
> > insertions(+), 58 deletions(-)
> >
> > diff --git a/drivers/iommu/intel-iommu.c
> > b/drivers/iommu/intel-iommu.c index ced1d89ef977..2ea09b988a23
> > 100644 --- a/drivers/iommu/intel-iommu.c
> > +++ b/drivers/iommu/intel-iommu.c
> > @@ -5311,7 +5311,7 @@ static void auxiliary_unlink_device(struct
> > dmar_domain *domain,
> > domain->auxd_refcnt--;
> >
> > if (!domain->auxd_refcnt && domain->default_pasid > 0)
> > - intel_pasid_free_id(domain->default_pasid);
> > + ioasid_free(domain->default_pasid);
> > }
> >
> > static int aux_domain_add_dev(struct dmar_domain *domain,
> > @@ -5329,10 +5329,10 @@ static int aux_domain_add_dev(struct
> > dmar_domain *domain,
> > if (domain->default_pasid <= 0) {
> > int pasid;
> >
> > - pasid = intel_pasid_alloc_id(domain, PASID_MIN,
> > -
> > pci_max_pasids(to_pci_dev(dev)),
> > - GFP_KERNEL);
> > - if (pasid <= 0) {
> > + /* No private data needed for the default pasid */
> > + pasid = ioasid_alloc(NULL, PASID_MIN,
> > pci_max_pasids(to_pci_dev(dev)) - 1,
> > + NULL);
> > + if (pasid == INVALID_IOASID) {
> > pr_err("Can't allocate default pasid\n");
> > return -ENODEV;
> > }
> > @@ -5368,7 +5368,7 @@ static int aux_domain_add_dev(struct
> > dmar_domain *domain,
> > spin_unlock(&iommu->lock);
> > spin_unlock_irqrestore(&device_domain_lock, flags);
> > if (!domain->auxd_refcnt && domain->default_pasid > 0)
> > - intel_pasid_free_id(domain->default_pasid);
> > + ioasid_free(domain->default_pasid);
> >
> > return ret;
> > }
> > diff --git a/drivers/iommu/intel-pasid.c
> > b/drivers/iommu/intel-pasid.c index d81e857d2b25..e79d680fe300
> > 100644 --- a/drivers/iommu/intel-pasid.c
> > +++ b/drivers/iommu/intel-pasid.c
> > @@ -26,42 +26,6 @@
> > */
> > static DEFINE_SPINLOCK(pasid_lock);
> > u32 intel_pasid_max_id = PASID_MAX;
> > -static DEFINE_IDR(pasid_idr);
> > -
> > -int intel_pasid_alloc_id(void *ptr, int start, int end, gfp_t gfp)
> > -{
> > - int ret, min, max;
> > -
> > - min = max_t(int, start, PASID_MIN);
> > - max = min_t(int, end, intel_pasid_max_id);
> > -
> > - WARN_ON(in_interrupt());
> > - idr_preload(gfp);
> > - spin_lock(&pasid_lock);
> > - ret = idr_alloc(&pasid_idr, ptr, min, max, GFP_ATOMIC);
> > - spin_unlock(&pasid_lock);
> > - idr_preload_end();
> > -
> > - return ret;
> > -}
> > -
> > -void intel_pasid_free_id(int pasid)
> > -{
> > - spin_lock(&pasid_lock);
> > - idr_remove(&pasid_idr, pasid);
> > - spin_unlock(&pasid_lock);
> > -}
> > -
> > -void *intel_pasid_lookup_id(int pasid)
> > -{
> > - void *p;
> > -
> > - spin_lock(&pasid_lock);
> > - p = idr_find(&pasid_idr, pasid);
> > - spin_unlock(&pasid_lock);
> > -
> > - return p;
> > -}
> >
> > int vcmd_alloc_pasid(struct intel_iommu *iommu, unsigned int
> > *pasid) {
> > diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
> > index 9b159132405d..a9a7f85a09bc 100644
> > --- a/drivers/iommu/intel-svm.c
> > +++ b/drivers/iommu/intel-svm.c
> > @@ -17,6 +17,7 @@
> > #include <linux/dmar.h>
> > #include <linux/interrupt.h>
> > #include <linux/mm_types.h>
> > +#include <linux/ioasid.h>
> > #include <asm/page.h>
> >
> > #include "intel-pasid.h"
> > @@ -318,16 +319,15 @@ int intel_svm_bind_mm(struct device *dev, int
> > *pasid, int flags, struct svm_dev_
> > if (pasid_max > intel_pasid_max_id)
> > pasid_max = intel_pasid_max_id;
> >
> > - /* Do not use PASID 0 in caching mode (virtualised
> > IOMMU) */
> > - ret = intel_pasid_alloc_id(svm,
> > - !!cap_caching_mode(iommu->cap),
> > - pasid_max - 1,
> > GFP_KERNEL);
> > - if (ret < 0) {
> > + /* Do not use PASID 0, reserved for RID to PASID */
> > + svm->pasid = ioasid_alloc(NULL, PASID_MIN,
> > + pasid_max - 1, svm);
> > + if (svm->pasid == INVALID_IOASID) {
> > kfree(svm);
> > kfree(sdev);
> > + ret = ENOSPC;
> > goto out;
> > }
> > - svm->pasid = ret;
> > svm->notifier.ops = &intel_mmuops;
> > svm->mm = mm;
> > svm->flags = flags;
> > @@ -337,7 +337,7 @@ int intel_svm_bind_mm(struct device *dev, int
> > *pasid, int flags, struct svm_dev_
> > if (mm) {
> > ret =
> > mmu_notifier_register(&svm->notifier, mm); if (ret) {
> > - intel_pasid_free_id(svm->pasid);
> > + ioasid_free(svm->pasid);
> > kfree(svm);
> > kfree(sdev);
> > goto out;
> > @@ -353,7 +353,7 @@ int intel_svm_bind_mm(struct device *dev, int
> > *pasid, int flags, struct svm_dev_
> > if (ret) {
> > if (mm)
> > mmu_notifier_unregister(&svm->notifier,
> > mm);
> > - intel_pasid_free_id(svm->pasid);
> > + ioasid_free(svm->pasid);
> > kfree(svm);
> > kfree(sdev);
> > goto out;
> > @@ -401,7 +401,12 @@ int intel_svm_unbind_mm(struct device *dev, int
> > pasid)
> > if (!iommu)
> > goto out;
> >
> > - svm = intel_pasid_lookup_id(pasid);
> > + svm = ioasid_find(NULL, pasid, NULL);
> > + if (IS_ERR(svm)) {
> > + ret = PTR_ERR(svm);
> > + goto out;
> > + }
> > +
> > if (!svm)
> > goto out;
> >
> > @@ -423,7 +428,9 @@ int intel_svm_unbind_mm(struct device *dev, int
> > pasid)
> > kfree_rcu(sdev, rcu);
> >
> > if (list_empty(&svm->devs)) {
> > -
> > intel_pasid_free_id(svm->pasid);
> > + /* Clear private data so
> > that free pass check */
> > +
> > ioasid_set_data(svm->pasid, NULL);
> > + ioasid_free(svm->pasid);
> > if (svm->mm)
> >
> > mmu_notifier_unregister(&svm->notifier, svm->mm);
> >
> > @@ -458,10 +465,11 @@ int intel_svm_is_pasid_valid(struct device
> > *dev, int pasid)
> > if (!iommu)
> > goto out;
> >
> > - svm = intel_pasid_lookup_id(pasid);
> > - if (!svm)
> > + svm = ioasid_find(NULL, pasid, NULL);
> > + if (IS_ERR(svm)) {
> > + ret = PTR_ERR(svm);
> > goto out;
> > -
> > + }
> > /* init_mm is used in this case */
> > if (!svm->mm)
> > ret = 1;
> > @@ -568,13 +576,12 @@ static irqreturn_t prq_event_thread(int irq,
> > void *d)
> >
> > if (!svm || svm->pasid != req->pasid) {
> > rcu_read_lock();
> > - svm = intel_pasid_lookup_id(req->pasid);
> > + svm = ioasid_find(NULL, req->pasid, NULL);
> > /* It *can't* go away, because the driver
> > is not permitted
> > * to unbind the mm while any page faults
> > are outstanding.
> > * So we only need RCU to protect the
> > internal idr code. */
> > rcu_read_unlock();
> > -
> > - if (!svm) {
> > + if (IS_ERR(svm) || !svm) {
> > pr_err("%s: Page request for
> > invalid PASID %d: %08llx %08llx\n",
> > iommu->name, req->pasid,
> > ((unsigned long long *)req)[0],
> > ((unsigned long long
> > *)req)[1]); --
> > 2.7.4
>
[Jacob Pan]
next prev parent reply other threads:[~2019-10-28 22:41 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 19:54 [PATCH v7 00/11] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2019-10-24 19:54 ` [PATCH v7 01/11] iommu/vt-d: Cache virtual command capability register Jacob Pan
2019-10-25 2:53 ` Lu Baolu
2019-10-25 6:06 ` Tian, Kevin
2019-11-08 10:32 ` Auger Eric
2019-10-24 19:54 ` [PATCH v7 02/11] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-10-25 6:19 ` Tian, Kevin
2019-10-29 17:14 ` Jacob Pan
2019-10-29 18:16 ` Tian, Kevin
2019-11-08 10:33 ` Auger Eric
2019-11-08 22:22 ` Jacob Pan
2019-10-24 19:54 ` [PATCH v7 03/11] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-10-25 2:30 ` Lu Baolu
2019-10-25 4:43 ` Jacob Pan
2019-10-25 6:40 ` Tian, Kevin
2019-10-25 14:39 ` Lu Baolu
2019-10-25 15:52 ` Tian, Kevin
2019-10-28 22:49 ` Jacob Pan
2019-10-29 2:22 ` Lu Baolu
2019-10-25 6:31 ` Tian, Kevin
2019-10-28 22:52 ` Jacob Pan
2019-11-08 10:40 ` Auger Eric
2019-11-08 22:26 ` Jacob Pan
2019-10-24 19:54 ` [PATCH v7 04/11] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-10-25 5:47 ` Lu Baolu
2019-11-01 18:29 ` Jacob Pan
2019-10-25 6:41 ` Tian, Kevin
2019-10-28 22:46 ` Jacob Pan [this message]
2019-11-08 11:30 ` Auger Eric
2019-11-08 22:55 ` Jacob Pan
2019-11-12 9:54 ` Auger Eric
2019-10-24 19:54 ` [PATCH v7 05/11] iommu/vt-d: Move domain helper to header Jacob Pan
2019-10-25 5:26 ` Lu Baolu
2019-10-24 19:54 ` [PATCH v7 06/11] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-10-25 5:32 ` Lu Baolu
2019-10-25 6:42 ` Tian, Kevin
2019-10-28 22:41 ` Jacob Pan
2019-11-12 9:54 ` Auger Eric
2019-10-24 19:55 ` [PATCH v7 07/11] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-10-25 7:04 ` Tian, Kevin
2019-11-01 21:10 ` Jacob Pan
2019-10-25 15:04 ` Lu Baolu
2019-10-25 16:06 ` Jacob Pan
2019-11-08 13:55 ` Auger Eric
2019-10-24 19:55 ` [PATCH v7 08/11] iommu/vt-d: Misc macro clean up for SVM Jacob Pan
2019-10-26 1:00 ` Lu Baolu
2019-10-28 22:38 ` Jacob Pan
2019-10-24 19:55 ` [PATCH v7 09/11] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-10-25 7:19 ` Tian, Kevin
2019-10-25 17:33 ` Jacob Pan
2019-10-28 6:03 ` Tian, Kevin
2019-10-28 16:02 ` Jacob Pan
2019-10-29 7:57 ` Tian, Kevin
2019-10-29 16:11 ` Jacob Pan
2019-10-29 18:04 ` Tian, Kevin
2019-10-29 2:33 ` Lu Baolu
2019-10-26 2:01 ` Lu Baolu
2019-10-28 22:29 ` Jacob Pan
2019-10-29 2:54 ` Lu Baolu
2019-10-29 4:11 ` Jacob Pan
2019-10-29 5:04 ` Lu Baolu
2019-10-24 19:55 ` [PATCH v7 10/11] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-10-25 7:21 ` Tian, Kevin
2019-11-01 21:30 ` Jacob Pan
2019-10-26 2:22 ` Lu Baolu
2019-11-01 21:28 ` Jacob Pan
2019-11-08 16:18 ` Auger Eric
2019-11-08 23:05 ` Jacob Pan
2019-10-24 19:55 ` [PATCH v7 11/11] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-10-25 7:27 ` Tian, Kevin
2019-10-26 2:40 ` Lu Baolu
2019-10-26 7:03 ` Lu Baolu
2019-10-28 6:06 ` Tian, Kevin
2019-10-28 16:10 ` Jacob Pan
2019-10-29 18:52 ` Tian, Kevin
2019-10-29 19:25 ` Jacob Pan
2019-10-28 16:13 ` Jacob Pan
2019-11-12 10:28 ` Auger Eric
2020-02-15 1:18 ` Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028154611.5c9979fd@jacob-builder \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe@linaro.com \
--cc=jic23@kernel.org \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).