linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
	patches@opensource.cirrus.com
Subject: [PATCH AUTOSEL 5.3 03/81] ASoC: wm8994: Do not register inapplicable controls for WM1811
Date: Wed, 30 Oct 2019 11:48:09 -0400	[thread overview]
Message-ID: <20191030154928.9432-3-sashal@kernel.org> (raw)
In-Reply-To: <20191030154928.9432-1-sashal@kernel.org>

From: Sylwester Nawrocki <s.nawrocki@samsung.com>

[ Upstream commit ca2347190adb5e4eece73a2b16e96e651c46246b ]

In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
 "amixer: Mixer hw:0 load error: Device or resource busy"

Reading some registers through I2C was failing with EBUSY error and
indeed these registers were not available according to the datasheet.

To fix this controls not available on WM1811 are moved to a separate
array and registered only for WM8994 and WM8958.

There are some further differences between WM8994 and WM1811,
e.g. registers 603h, 604h, 605h, which are not covered in this patch.

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8994.c | 43 +++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index c3d06e8bc54f2..d5fb7f5dd551c 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -533,13 +533,10 @@ static SOC_ENUM_SINGLE_DECL(dac_osr,
 static SOC_ENUM_SINGLE_DECL(adc_osr,
 			    WM8994_OVERSAMPLING, 1, osr_text);
 
-static const struct snd_kcontrol_new wm8994_snd_controls[] = {
+static const struct snd_kcontrol_new wm8994_common_snd_controls[] = {
 SOC_DOUBLE_R_TLV("AIF1ADC1 Volume", WM8994_AIF1_ADC1_LEFT_VOLUME,
 		 WM8994_AIF1_ADC1_RIGHT_VOLUME,
 		 1, 119, 0, digital_tlv),
-SOC_DOUBLE_R_TLV("AIF1ADC2 Volume", WM8994_AIF1_ADC2_LEFT_VOLUME,
-		 WM8994_AIF1_ADC2_RIGHT_VOLUME,
-		 1, 119, 0, digital_tlv),
 SOC_DOUBLE_R_TLV("AIF2ADC Volume", WM8994_AIF2_ADC_LEFT_VOLUME,
 		 WM8994_AIF2_ADC_RIGHT_VOLUME,
 		 1, 119, 0, digital_tlv),
@@ -556,8 +553,6 @@ SOC_ENUM("AIF2DACR Source", aif2dacr_src),
 
 SOC_DOUBLE_R_TLV("AIF1DAC1 Volume", WM8994_AIF1_DAC1_LEFT_VOLUME,
 		 WM8994_AIF1_DAC1_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
-SOC_DOUBLE_R_TLV("AIF1DAC2 Volume", WM8994_AIF1_DAC2_LEFT_VOLUME,
-		 WM8994_AIF1_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
 SOC_DOUBLE_R_TLV("AIF2DAC Volume", WM8994_AIF2_DAC_LEFT_VOLUME,
 		 WM8994_AIF2_DAC_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
 
@@ -565,17 +560,12 @@ SOC_SINGLE_TLV("AIF1 Boost Volume", WM8994_AIF1_CONTROL_2, 10, 3, 0, aif_tlv),
 SOC_SINGLE_TLV("AIF2 Boost Volume", WM8994_AIF2_CONTROL_2, 10, 3, 0, aif_tlv),
 
 SOC_SINGLE("AIF1DAC1 EQ Switch", WM8994_AIF1_DAC1_EQ_GAINS_1, 0, 1, 0),
-SOC_SINGLE("AIF1DAC2 EQ Switch", WM8994_AIF1_DAC2_EQ_GAINS_1, 0, 1, 0),
 SOC_SINGLE("AIF2 EQ Switch", WM8994_AIF2_EQ_GAINS_1, 0, 1, 0),
 
 WM8994_DRC_SWITCH("AIF1DAC1 DRC Switch", WM8994_AIF1_DRC1_1, 2),
 WM8994_DRC_SWITCH("AIF1ADC1L DRC Switch", WM8994_AIF1_DRC1_1, 1),
 WM8994_DRC_SWITCH("AIF1ADC1R DRC Switch", WM8994_AIF1_DRC1_1, 0),
 
-WM8994_DRC_SWITCH("AIF1DAC2 DRC Switch", WM8994_AIF1_DRC2_1, 2),
-WM8994_DRC_SWITCH("AIF1ADC2L DRC Switch", WM8994_AIF1_DRC2_1, 1),
-WM8994_DRC_SWITCH("AIF1ADC2R DRC Switch", WM8994_AIF1_DRC2_1, 0),
-
 WM8994_DRC_SWITCH("AIF2DAC DRC Switch", WM8994_AIF2_DRC_1, 2),
 WM8994_DRC_SWITCH("AIF2ADCL DRC Switch", WM8994_AIF2_DRC_1, 1),
 WM8994_DRC_SWITCH("AIF2ADCR DRC Switch", WM8994_AIF2_DRC_1, 0),
@@ -594,9 +584,6 @@ SOC_SINGLE("Sidetone HPF Switch", WM8994_SIDETONE, 6, 1, 0),
 SOC_ENUM("AIF1ADC1 HPF Mode", aif1adc1_hpf),
 SOC_DOUBLE("AIF1ADC1 HPF Switch", WM8994_AIF1_ADC1_FILTERS, 12, 11, 1, 0),
 
-SOC_ENUM("AIF1ADC2 HPF Mode", aif1adc2_hpf),
-SOC_DOUBLE("AIF1ADC2 HPF Switch", WM8994_AIF1_ADC2_FILTERS, 12, 11, 1, 0),
-
 SOC_ENUM("AIF2ADC HPF Mode", aif2adc_hpf),
 SOC_DOUBLE("AIF2ADC HPF Switch", WM8994_AIF2_ADC_FILTERS, 12, 11, 1, 0),
 
@@ -637,6 +624,24 @@ SOC_SINGLE("AIF2DAC 3D Stereo Switch", WM8994_AIF2_DAC_FILTERS_2,
 	   8, 1, 0),
 };
 
+/* Controls not available on WM1811 */
+static const struct snd_kcontrol_new wm8994_snd_controls[] = {
+SOC_DOUBLE_R_TLV("AIF1ADC2 Volume", WM8994_AIF1_ADC2_LEFT_VOLUME,
+		 WM8994_AIF1_ADC2_RIGHT_VOLUME,
+		 1, 119, 0, digital_tlv),
+SOC_DOUBLE_R_TLV("AIF1DAC2 Volume", WM8994_AIF1_DAC2_LEFT_VOLUME,
+		 WM8994_AIF1_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+
+SOC_SINGLE("AIF1DAC2 EQ Switch", WM8994_AIF1_DAC2_EQ_GAINS_1, 0, 1, 0),
+
+WM8994_DRC_SWITCH("AIF1DAC2 DRC Switch", WM8994_AIF1_DRC2_1, 2),
+WM8994_DRC_SWITCH("AIF1ADC2L DRC Switch", WM8994_AIF1_DRC2_1, 1),
+WM8994_DRC_SWITCH("AIF1ADC2R DRC Switch", WM8994_AIF1_DRC2_1, 0),
+
+SOC_ENUM("AIF1ADC2 HPF Mode", aif1adc2_hpf),
+SOC_DOUBLE("AIF1ADC2 HPF Switch", WM8994_AIF1_ADC2_FILTERS, 12, 11, 1, 0),
+};
+
 static const struct snd_kcontrol_new wm8994_eq_controls[] = {
 SOC_SINGLE_TLV("AIF1DAC1 EQ1 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 11, 31, 0,
 	       eq_tlv),
@@ -4258,13 +4263,15 @@ static int wm8994_component_probe(struct snd_soc_component *component)
 	wm8994_handle_pdata(wm8994);
 
 	wm_hubs_add_analogue_controls(component);
-	snd_soc_add_component_controls(component, wm8994_snd_controls,
-			     ARRAY_SIZE(wm8994_snd_controls));
+	snd_soc_add_component_controls(component, wm8994_common_snd_controls,
+				       ARRAY_SIZE(wm8994_common_snd_controls));
 	snd_soc_dapm_new_controls(dapm, wm8994_dapm_widgets,
 				  ARRAY_SIZE(wm8994_dapm_widgets));
 
 	switch (control->type) {
 	case WM8994:
+		snd_soc_add_component_controls(component, wm8994_snd_controls,
+					       ARRAY_SIZE(wm8994_snd_controls));
 		snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets,
 					  ARRAY_SIZE(wm8994_specific_dapm_widgets));
 		if (control->revision < 4) {
@@ -4284,8 +4291,10 @@ static int wm8994_component_probe(struct snd_soc_component *component)
 		}
 		break;
 	case WM8958:
+		snd_soc_add_component_controls(component, wm8994_snd_controls,
+					       ARRAY_SIZE(wm8994_snd_controls));
 		snd_soc_add_component_controls(component, wm8958_snd_controls,
-				     ARRAY_SIZE(wm8958_snd_controls));
+					       ARRAY_SIZE(wm8958_snd_controls));
 		snd_soc_dapm_new_controls(dapm, wm8958_dapm_widgets,
 					  ARRAY_SIZE(wm8958_dapm_widgets));
 		if (control->revision < 1) {
-- 
2.20.1


  parent reply	other threads:[~2019-10-30 15:49 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30 15:48 [PATCH AUTOSEL 5.3 01/81] regulator: of: fix suspend-min/max-voltage parsing Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 02/81] ASoC: samsung: arndale: Add missing OF node dereferencing Sasha Levin
2019-10-30 15:48 ` Sasha Levin [this message]
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 04/81] regulator: da9062: fix suspend_enable/disable preparation Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 05/81] ASoC: topology: Fix a signedness bug in soc_tplg_dapm_widget_create() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 06/81] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 07/81] arm64: dts: allwinner: a64: Drop PMU node Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 08/81] arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 09/81] arm64: dts: Fix gpio to pinmux mapping Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 10/81] regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 11/81] pinctrl: intel: Allocate IRQ chip dynamic Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 12/81] ASoC: SOF: loader: fix kernel oops on firmware boot failure Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 13/81] ASoC: SOF: topology: fix parse fail issue for byte/bool tuple types Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 14/81] ASoC: SOF: Intel: hda: fix warnings during FW load Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 15/81] ASoC: SOF: Intel: initialise and verify FW crash dump data Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 16/81] ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 17/81] ASoC: rt5682: add NULL handler to set_jack function Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 18/81] ASoC: intel: sof_rt5682: add remove function to disable jack Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 19/81] ASoC: intel: bytcr_rt5651: add null check to support_button_press Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 20/81] regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 21/81] ASoC: wm_adsp: Don't generate kcontrols without READ flags Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 22/81] ASoc: rockchip: i2s: Fix RPM imbalance Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 23/81] arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 24/81] ARM: dts: logicpd-torpedo-som: Remove twl_keypad Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 25/81] arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 26/81] arm64: dts: rockchip: fix RockPro64 sdhci settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 27/81] pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 28/81] pinctrl: stmfx: fix null pointer on remove Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 29/81] arm64: dts: zii-ultra: fix ARM regulator states Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 30/81] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 31/81] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2 Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 32/81] ASoC: simple_card_utils.h: Fix potential multiple redefinition error Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 33/81] ARM: dts: Use level interrupt for omap4 & 5 wlcore Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 34/81] ARM: mm: fix alignment handler faults under memory pressure Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 35/81] scsi: qla2xxx: fix a potential NULL pointer dereference Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 36/81] scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 37/81] scsi: sni_53c710: fix compilation error Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 38/81] scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 39/81] ARM: 8908/1: add __always_inline to functions called from __get_user_check() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 40/81] ARM: 8914/1: NOMMU: Fix exc_ret for XIP Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 41/81] arm64: dts: rockchip: fix RockPro64 sdmmc settings Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 42/81] arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 43/81] arm64: dts: lx2160a: Correct CPU core idle state name Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 44/81] ARM: dts: imx6q-logicpd: Re-Enable SNVS power key Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 45/81] ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 46/81] ARM: dts: imx7s: Correct GPT's ipg clock source Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 47/81] arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 48/81] arm64: dts: imx8mm: " Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 49/81] perf tools: Fix resource leak of closedir() on the error paths Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 50/81] perf c2c: Fix memory leak in build_cl_output() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 51/81] USB: legousbtower: fix a signedness bug in tower_probe() Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 52/81] 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV Sasha Levin
2019-10-30 15:48 ` [PATCH AUTOSEL 5.3 53/81] perf kmem: Fix memory leak in compact_gfp_flags() Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 54/81] ARM: davinci: dm365: Fix McBSP dma_slave_map entry Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 55/81] drm/amdgpu: fix potential VM faults Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 56/81] drm/amdgpu: fix error handling in amdgpu_bo_list_create Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 57/81] scsi: target: core: Do not overwrite CDB byte 1 Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 58/81] scsi: hpsa: add missing hunks in reset-patch Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 59/81] ASoC: Intel: sof-rt5682: add a check for devm_clk_get Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 60/81] ASoC: SOF: control: return true when kcontrol values change Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 61/81] tracing: Fix "gfp_t" format for synthetic events Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 62/81] ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Sasha Levin
2019-10-30 15:49 ` [PATCH AUTOSEL 5.3 63/81] i2c: aspeed: fix master pending state handling Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191030154928.9432-3-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=s.nawrocki@samsung.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).