linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Jernej Skrabec <jernej.skrabec@siol.net>,
	Ondrej Jirman <megous@megous.com>,
	Maxime Ripard <mripard@kernel.org>,
	Sasha Levin <sashal@kernel.org>,
	devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 03/38] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay
Date: Wed, 30 Oct 2019 11:53:31 -0400	[thread overview]
Message-ID: <20191030155406.10109-3-sashal@kernel.org> (raw)
In-Reply-To: <20191030155406.10109-1-sashal@kernel.org>

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit 2511366797fa6ab4a404b4b000ef7cd262aaafe8 ]

Depending on kernel and bootloader configuration, it's possible that
Realtek ethernet PHY isn't powered on properly. According to the
datasheet, it needs 30ms to power up and then some more time before it
can be used.

Fix that by adding 100ms ramp delay to regulator responsible for
powering PHY.

Fixes: 94dcfdc77fc5 ("arm64: allwinner: pine64-plus: Enable dwmac-sun8i")
Suggested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index 24f1aac366d64..d5b6e8159a335 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -63,3 +63,12 @@
 		reg = <1>;
 	};
 };
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};
-- 
2.20.1


  parent reply	other threads:[~2019-10-30 16:01 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30 15:53 [PATCH AUTOSEL 4.19 01/38] regulator: of: fix suspend-min/max-voltage parsing Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 02/38] ASoC: wm8994: Do not register inapplicable controls for WM1811 Sasha Levin
2019-10-30 15:53 ` Sasha Levin [this message]
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 04/38] arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 05/38] arm64: dts: Fix gpio to pinmux mapping Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 06/38] regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 07/38] ASoC: rt5682: add NULL handler to set_jack function Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 08/38] regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 09/38] ASoC: wm_adsp: Don't generate kcontrols without READ flags Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 10/38] ASoc: rockchip: i2s: Fix RPM imbalance Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 11/38] ARM: dts: logicpd-torpedo-som: Remove twl_keypad Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 12/38] pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 13/38] ARM: mm: fix alignment handler faults under memory pressure Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 14/38] scsi: qla2xxx: fix a potential NULL pointer dereference Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 15/38] scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 16/38] scsi: sni_53c710: fix compilation error Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 17/38] scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 18/38] ARM: 8914/1: NOMMU: Fix exc_ret for XIP Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 19/38] ARM: dts: imx7s: Correct GPT's ipg clock source Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 20/38] perf c2c: Fix memory leak in build_cl_output() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 21/38] USB: legousbtower: fix a signedness bug in tower_probe() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 22/38] 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 23/38] perf kmem: Fix memory leak in compact_gfp_flags() Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 24/38] ARM: davinci: dm365: Fix McBSP dma_slave_map entry Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 25/38] drm/amdgpu: fix potential VM faults Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 26/38] scsi: target: core: Do not overwrite CDB byte 1 Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 27/38] tracing: Fix "gfp_t" format for synthetic events Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 28/38] ARM: 8926/1: v7m: remove register save to stack before svc Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 29/38] of: unittest: fix memory leak in unittest_data_add Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 30/38] MIPS: bmips: mark exception vectors as char arrays Sasha Levin
2019-10-30 15:53 ` [PATCH AUTOSEL 4.19 31/38] irqchip/gic-v3-its: Use the exact ITSList for VMOVP Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 32/38] i2c: stm32f7: fix first byte to send in slave mode Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 33/38] i2c: stm32f7: fix a race in slave mode with arbitration loss irq Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 34/38] i2c: stm32f7: remove warning when compiling with W=1 Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 35/38] cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 36/38] nbd: protect cmd->status with cmd->lock Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 37/38] nbd: handle racing with error'ed out commands Sasha Levin
2019-10-30 15:54 ` [PATCH AUTOSEL 4.19 38/38] nbd: verify socket is supported during setup Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191030155406.10109-3-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=megous@megous.com \
    --cc=mripard@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).