linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Boqun Feng <boqun.feng@gmail.com>
To: linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Michael Kelley <mikelley@microsoft.com>,
	Boqun Feng <boqun.feng@gmail.com>,
	"K. Y. Srinivasan" <kys@microsoft.com>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	Stephen Hemminger <sthemmin@microsoft.com>,
	Sasha Levin <sashal@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Andrew Murray <andrew.murray@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org (open list:PCI NATIVE HOST BRIDGE AND
	ENDPOINT DRIVERS)
Subject: [PATCH 2/2] pci: hyperv: Move retarget related struct definitions into tlfs
Date: Tue, 21 Jan 2020 09:57:13 +0800	[thread overview]
Message-ID: <20200121015713.69691-2-boqun.feng@gmail.com> (raw)
In-Reply-To: <20200121015713.69691-1-boqun.feng@gmail.com>

For future support of virtual PCI on non-x86 architecture.

Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
---
 arch/x86/include/asm/hyperv-tlfs.h  | 38 +++++++++++++++++++++++++++++
 arch/x86/include/asm/mshyperv.h     |  8 ++++++
 drivers/pci/controller/pci-hyperv.c | 38 +++--------------------------
 3 files changed, 50 insertions(+), 34 deletions(-)

diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index b9ebc20b2385..debe017ae748 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -912,4 +912,42 @@ struct hv_tlb_flush_ex {
 struct hv_partition_assist_pg {
 	u32 tlb_lock_count;
 };
+
+union hv_msi_entry {
+	u64 as_uint64;
+	struct {
+		u32 address;
+		u32 data;
+	} __packed;
+};
+
+struct hv_interrupt_entry {
+	u32 source;			/* 1 for MSI(-X) */
+	u32 reserved1;
+	union hv_msi_entry msi_entry;
+} __packed;
+
+/*
+ * flags for hv_device_interrupt_target.flags
+ */
+#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
+#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
+
+struct hv_device_interrupt_target {
+	u32 vector;
+	u32 flags;
+	union {
+		u64 vp_mask;
+		struct hv_vpset vp_set;
+	};
+} __packed;
+
+/* HvRetargetDeviceInterrupt hypercall */
+struct hv_retarget_device_interrupt {
+	u64 partition_id;
+	u64 device_id;
+	struct hv_interrupt_entry int_entry;
+	u64 reserved2;
+	struct hv_device_interrupt_target int_target;
+} __packed __aligned(8);
 #endif
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 6b79515abb82..d13319d82f6b 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -240,6 +240,14 @@ bool hv_vcpu_is_preempted(int vcpu);
 static inline void hv_apic_init(void) {}
 #endif
 
+#if IS_ENABLED(CONFIG_PCI_HYPERV)
+#define hv_set_msi_address_from_desc(msi_entry, msi_desc)	\
+do {								\
+	(msi_entry)->address = (msi_desc)->msg.address_lo;	\
+} while (0)
+
+#endif /* CONFIG_PCI_HYPERV */
+
 #else /* CONFIG_HYPERV */
 static inline void hyperv_init(void) {}
 static inline void hyperv_setup_mmu_ops(void) {}
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index aacfcc90d929..2240f2b3643e 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -406,36 +406,6 @@ struct pci_eject_response {
 
 static int pci_ring_size = (4 * PAGE_SIZE);
 
-struct hv_interrupt_entry {
-	u32	source;			/* 1 for MSI(-X) */
-	u32	reserved1;
-	u32	address;
-	u32	data;
-};
-
-/*
- * flags for hv_device_interrupt_target.flags
- */
-#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST		1
-#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET	2
-
-struct hv_device_interrupt_target {
-	u32	vector;
-	u32	flags;
-	union {
-		u64		 vp_mask;
-		struct hv_vpset vp_set;
-	};
-};
-
-struct retarget_msi_interrupt {
-	u64	partition_id;		/* use "self" */
-	u64	device_id;
-	struct hv_interrupt_entry int_entry;
-	u64	reserved2;
-	struct hv_device_interrupt_target int_target;
-} __packed __aligned(8);
-
 /*
  * Driver specific state.
  */
@@ -482,7 +452,7 @@ struct hv_pcibus_device {
 	struct workqueue_struct *wq;
 
 	/* hypercall arg, must not cross page boundary */
-	struct retarget_msi_interrupt retarget_msi_interrupt_params;
+	struct hv_retarget_device_interrupt retarget_msi_interrupt_params;
 
 	/*
 	 * Don't put anything here: retarget_msi_interrupt_params must be last
@@ -1178,7 +1148,7 @@ static void hv_irq_unmask(struct irq_data *data)
 {
 	struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
 	struct irq_cfg *cfg = irqd_cfg(data);
-	struct retarget_msi_interrupt *params;
+	struct hv_retarget_device_interrupt *params;
 	struct hv_pcibus_device *hbus;
 	struct cpumask *dest;
 	cpumask_var_t tmp;
@@ -1200,8 +1170,8 @@ static void hv_irq_unmask(struct irq_data *data)
 	memset(params, 0, sizeof(*params));
 	params->partition_id = HV_PARTITION_ID_SELF;
 	params->int_entry.source = 1; /* MSI(-X) */
-	params->int_entry.address = msi_desc->msg.address_lo;
-	params->int_entry.data = msi_desc->msg.data;
+	hv_set_msi_address_from_desc(&params->int_entry.msi_entry, msi_desc);
+	params->int_entry.msi_entry.data = msi_desc->msg.data;
 	params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
 			   (hbus->hdev->dev_instance.b[4] << 16) |
 			   (hbus->hdev->dev_instance.b[7] << 8) |
-- 
2.24.1


  reply	other threads:[~2020-01-21  1:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-21  1:57 [PATCH 1/2] pci: hyperv: x86: Move hypercall related definitions into tlfs header Boqun Feng
2020-01-21  1:57 ` Boqun Feng [this message]
2020-01-21  9:25   ` [PATCH 2/2] pci: hyperv: Move retarget related struct definitions into tlfs Vitaly Kuznetsov
2020-01-23 10:40     ` Boqun Feng
2020-01-21 14:37   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200121015713.69691-2-boqun.feng@gmail.com \
    --to=boqun.feng@gmail.com \
    --cc=andrew.murray@arm.com \
    --cc=bhelgaas@google.com \
    --cc=bp@alien8.de \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mikelley@microsoft.com \
    --cc=mingo@redhat.com \
    --cc=sashal@kernel.org \
    --cc=sthemmin@microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).