linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "André Draszik" <git@andred.net>
To: linux-kernel@vger.kernel.org
Cc: "André Draszik" <git@andred.net>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	"Horia Geantă" <horia.geanta@nxp.com>,
	"Aymen Sghaier" <aymen.sghaier@nxp.com>,
	"Herbert Xu" <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	linux-crypto@vger.kernel.org, devicetree@vger.kernel.org,
	linux-input@vger.kernel.org
Subject: [PATCH 1/3] ARM: dts: imx7s: add snvs clock to pwrkey
Date: Thu, 30 Jan 2020 20:45:14 +0000	[thread overview]
Message-ID: <20200130204516.4760-1-git@andred.net> (raw)

On i.MX7, the SNVS requires a clock. This is similar to the clock
bound to the SNVS RTC node, but if the SNVS RTC driver isn't enabled,
then SNVS doesn't work, and as such the pwrkey driver doesn't
work (i.e. hangs the kernel, as the clock isn't enabled).

Also see commit ec2a844ef7c1
("ARM: dts: imx7s: add snvs rtc clock")
for a similar fix.

Signed-off-by: André Draszik <git@andred.net>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-input@vger.kernel.org
---
 .../devicetree/bindings/crypto/fsl-sec4.txt     | 17 +++++++++++++++++
 arch/arm/boot/dts/imx7s.dtsi                    |  2 ++
 2 files changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 2fe245ca816a..755c2838d658 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -449,6 +449,19 @@ System ON/OFF key driver
       Value type: <phandle>
       Definition: this is phandle to the register map node.
 
+   - clocks
+      Usage: optional, required if SNVS LP requires explicit
+          enablement of clocks
+      Value type: <prop_encoded-array>
+      Definition:  a clock specifier describing the clock required for
+          enabling and disabling SNVS LP RTC.
+
+   - clock-names
+      Usage: optional, required if SNVS LP requires explicit
+          enablement of clocks
+      Value type: <string>
+      Definition: clock name string should be "snvs-pwrkey".
+
 EXAMPLE:
 	snvs-pwrkey@020cc000 {
 		compatible = "fsl,sec-v4.0-pwrkey";
@@ -456,6 +469,8 @@ EXAMPLE:
 		interrupts = <0 4 0x4>
 	        linux,keycode = <116>; /* KEY_POWER */
 		wakeup-source;
+		clocks = <&clks IMX7D_SNVS_CLK>;
+		clock-names = "snvs-pwrkey";
 	};
 
 =====================================================================
@@ -547,6 +562,8 @@ FULL EXAMPLE
 			interrupts = <0 4 0x4>;
 			linux,keycode = <116>; /* KEY_POWER */
 			wakeup-source;
+			clocks = <&clks IMX7D_SNVS_CLK>;
+			clock-names = "snvs-pwrkey";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1b812f4e7453..6240a6f58048 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -614,6 +614,8 @@
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-pwrkey";
 				};
 			};
 
-- 
2.23.0.rc1


             reply	other threads:[~2020-01-30 20:45 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30 20:45 André Draszik [this message]
2020-01-30 20:45 ` [PATCH 2/3] Input: snvs_pwrkey - enable snvs clock as needed André Draszik
2020-02-07  8:10   ` Horia Geanta
2020-02-09 22:38     ` Dmitry Torokhov
2020-02-10  2:03       ` Robin Gong
2020-02-10  6:33         ` Horia Geanta
2020-02-10 17:55           ` Dmitry Torokhov
2020-02-11  1:54             ` Robin Gong
2020-02-11  9:13               ` André Draszik
2020-02-12  0:58                 ` Robin Gong
2020-01-30 20:45 ` [PATCH 3/3] Input: snvs_pwrkey - only IRQ_HANDLED for our own events André Draszik
2020-02-06 18:30 ` [PATCH 1/3] ARM: dts: imx7s: add snvs clock to pwrkey Rob Herring
2020-02-07  7:36 ` Horia Geanta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200130204516.4760-1-git@andred.net \
    --to=git@andred.net \
    --cc=Anson.Huang@nxp.com \
    --cc=aymen.sghaier@nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=horia.geanta@nxp.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).