On Tue, Feb 11, 2020 at 08:09:57AM +0100, Jernej Škrabec wrote:
> Hi!
>
> Dne torek, 11. februar 2020 ob 07:51:41 CET je Maxime Ripard napisal(a):
> > On Mon, Feb 10, 2020 at 06:40:07PM +0100, Jernej Skrabec wrote:
> > > OrangePi 3 can optionally have 8 GiB eMMC (soldered on board). Because
> > > those pins are dedicated to eMMC exclusively, node can be added for both
> > > variants (with and without eMMC). Kernel will then scan bus for presence
> > > of eMMC and act accordingly.
> > >
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > > ---
> > > Changes since v1:
> > > - don't make separate DT just for -emmc variant - add node to existing
> > >
> > >   orangepi 3 DT
> > >
> > >  arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 9 +++++++++
> > >  1 file changed, 9 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> > > b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index
> > > c311eee52a35..1e0abd9d047f 100644
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> > > @@ -144,6 +144,15 @@ brcm: sdio-wifi@1 {
> > >
> > >  	};
> > >
> > >  };
> > >
> > > +&mmc2 {
> > > +	vmmc-supply = <&reg_cldo1>;
> > > +	vqmmc-supply = <&reg_bldo2>;
> > > +	cap-mmc-hw-reset;
> > > +	non-removable;
> >
> > Given that non-removable is documented as "Non-removable slot (like
> > eMMC); assume always present.", we should probably get rid of that
> > property?
>
> I checked mmc core code and this property means that bus will be scanned only
> once. In this form, node doesn't tell what kind of device is connected, so
> core has to scan it no matter if "non-removable" property is present or not. I
> maybe missed something though, so it would be great if someone can check it
> again.

It looks like it does indeed :)

I've applied that patch, thanks!
Maxime