From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 22/24] n_hdlc: add missing spaces after commas
Date: Wed, 19 Feb 2020 09:41:16 +0100 [thread overview]
Message-ID: <20200219084118.26491-22-jslaby@suse.cz> (raw)
In-Reply-To: <20200219084118.26491-1-jslaby@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_hdlc.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index d52bcfa7f8e4..7ae4347a946f 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -201,7 +201,7 @@ static void n_hdlc_tty_close(struct tty_struct *tty)
return;
}
#if defined(TTY_NO_WRITE_SPLIT)
- clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
+ clear_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
#endif
tty->disc_data = NULL;
@@ -245,7 +245,7 @@ static int n_hdlc_tty_open(struct tty_struct *tty)
tty->receive_room = 65536;
/* change tty_io write() to not split large writes into 8K chunks */
- set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
+ set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
/* flush receive data from driver */
tty_driver_flush_buffer(tty);
@@ -399,7 +399,7 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
}
/* copy received data to HDLC buffer */
- memcpy(buf->buf,data,count);
+ memcpy(buf->buf, data, count);
buf->count=count;
/* add HDLC buffer to list of received frames */
@@ -550,8 +550,8 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
/* Send the data */
tbuf->count = error = count;
- n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
- n_hdlc_send_frames(n_hdlc,tty);
+ n_hdlc_buf_put(&n_hdlc->tx_buf_list, tbuf);
+ n_hdlc_send_frames(n_hdlc, tty);
}
return error;
@@ -586,14 +586,14 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
case FIONREAD:
/* report count of read data available */
/* in next available frame (if any) */
- spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
+ spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock, flags);
buf = list_first_entry_or_null(&n_hdlc->rx_buf_list.list,
struct n_hdlc_buf, list_item);
if (buf)
count = buf->count;
else
count = 0;
- spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
+ spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock, flags);
error = put_user(count, (int __user *)arg);
break;
@@ -601,12 +601,12 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
/* get the pending tx byte count in the driver */
count = tty_chars_in_buffer(tty);
/* add size of next output frame in queue */
- spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
+ spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
buf = list_first_entry_or_null(&n_hdlc->tx_buf_list.list,
struct n_hdlc_buf, list_item);
if (buf)
count += buf->count;
- spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
+ spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
error = put_user(count, (int __user *)arg);
break;
--
2.25.0
next prev parent reply other threads:[~2020-02-19 8:41 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 8:40 [PATCH 01/24] n_hdlc: remove tracing debug prints Jiri Slaby
2020-02-19 8:40 ` [PATCH 02/24] n_hdlc: remove unused macros Jiri Slaby
2020-02-19 8:40 ` [PATCH 03/24] n_hdlc: convert debuglevel use to pr_debug Jiri Slaby
2020-02-19 12:20 ` Joe Perches
2020-02-20 12:45 ` Greg KH
2020-02-21 8:16 ` Jiri Slaby
2020-02-19 8:40 ` [PATCH 04/24] n_hdlc: put init/exit strings directly to prints Jiri Slaby
2020-02-19 8:40 ` [PATCH 05/24] n_hdlc: cleanup messages during registration Jiri Slaby
2020-02-19 8:41 ` [PATCH 06/24] n_hdlc: use clamp() for maxframe Jiri Slaby
2020-02-19 8:41 ` [PATCH 07/24] n_hdlc: simplify freeing of buffer list Jiri Slaby
2020-02-19 8:41 ` [PATCH 08/24] n_hdlc: invert conditions in n_hdlc_tty_close and n_hdlc_tty_poll Jiri Slaby
2020-02-19 8:41 ` [PATCH 09/24] n_hdlc: remove unused flags Jiri Slaby
2020-02-19 8:41 ` [PATCH 10/24] n_hdlc: remove unused backup_tty Jiri Slaby
2020-02-19 8:41 ` [PATCH 11/24] n_hdlc: expand tty2n_hdlc macro Jiri Slaby
2020-02-19 8:41 ` [PATCH 12/24] n_hdlc: inline n_hdlc_release Jiri Slaby
2020-02-19 8:41 ` [PATCH 13/24] n_hdlc: remove cached tty Jiri Slaby
2020-02-19 8:41 ` [PATCH 14/24] n_hdlc: remove checking of n_hdlc Jiri Slaby
2020-02-19 8:41 ` [PATCH 15/24] n_hdlc: add helper for buffers allocation Jiri Slaby
2020-02-19 8:41 ` [PATCH 16/24] n_hdlc: move tty_ldisc_ops to the bottom Jiri Slaby
2020-02-19 8:41 ` [PATCH 17/24] n_hdlc: switch tbusy and woke_up to bools Jiri Slaby
2020-02-19 8:41 ` [PATCH 18/24] n_hdlc: remove unneeded ifdef Jiri Slaby
2020-02-19 8:41 ` [PATCH 19/24] n_hdlc: use __func__ and pr_ print helpers Jiri Slaby
2020-02-19 8:41 ` [PATCH 20/24] n_hdlc: remove useless whitespace at line wraps Jiri Slaby
2020-02-19 8:41 ` [PATCH 21/24] n_hdlc: remove spaces between function name and ( Jiri Slaby
2020-02-19 8:41 ` Jiri Slaby [this message]
2020-02-19 8:41 ` [PATCH 23/24] n_hdlc: fix whitespace around binary operators Jiri Slaby
2020-02-19 8:41 ` [PATCH 24/24] n_hdlc: wrap a comment properly Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219084118.26491-22-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).