From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Ben Gardon <bgardon@google.com>,
Junaid Shahid <junaids@google.com>,
Liran Alon <liran.alon@oracle.com>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
John Haxby <john.haxby@oracle.com>,
Miaohe Lin <linmiaohe@huawei.com>,
Tom Lendacky <thomas.lendacky@amd.com>
Subject: [PATCH v3 18/37] KVM: VMX: Move vmx_flush_tlb() to vmx.c
Date: Fri, 20 Mar 2020 14:28:14 -0700 [thread overview]
Message-ID: <20200320212833.3507-19-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20200320212833.3507-1-sean.j.christopherson@intel.com>
Move vmx_flush_tlb() to vmx.c and make it non-inline static now that all
its callers live in vmx.c.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/kvm/vmx/vmx.c | 25 +++++++++++++++++++++++++
arch/x86/kvm/vmx/vmx.h | 25 -------------------------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 477bdbc52ed0..c6affaaef138 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2849,6 +2849,31 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
#endif
+static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+ /*
+ * Flush all EPTP/VPID contexts, as the TLB flush _may_ have been
+ * invoked via kvm_flush_remote_tlbs(). Flushing remote TLBs requires
+ * all contexts to be flushed, not just the active context.
+ *
+ * Note, this also ensures a deferred TLB flush with VPID enabled and
+ * EPT disabled invalidates the "correct" VPID, by nuking both L1 and
+ * L2's VPIDs.
+ */
+ if (enable_ept) {
+ ept_sync_global();
+ } else if (enable_vpid) {
+ if (cpu_has_vmx_invvpid_global()) {
+ vpid_sync_vcpu_global();
+ } else {
+ vpid_sync_vcpu_single(vmx->vpid);
+ vpid_sync_vcpu_single(vmx->nested.vpid02);
+ }
+ }
+}
+
static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr)
{
/*
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index bab5d62ad964..571249e18bb6 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -503,31 +503,6 @@ static inline struct vmcs *alloc_vmcs(bool shadow)
u64 construct_eptp(struct kvm_vcpu *vcpu, unsigned long root_hpa);
-static inline void vmx_flush_tlb(struct kvm_vcpu *vcpu)
-{
- struct vcpu_vmx *vmx = to_vmx(vcpu);
-
- /*
- * Flush all EPTP/VPID contexts, as the TLB flush _may_ have been
- * invoked via kvm_flush_remote_tlbs(). Flushing remote TLBs requires
- * all contexts to be flushed, not just the active context.
- *
- * Note, this also ensures a deferred TLB flush with VPID enabled and
- * EPT disabled invalidates the "correct" VPID, by nuking both L1 and
- * L2's VPIDs.
- */
- if (enable_ept) {
- ept_sync_global();
- } else if (enable_vpid) {
- if (cpu_has_vmx_invvpid_global()) {
- vpid_sync_vcpu_global();
- } else {
- vpid_sync_vcpu_single(vmx->vpid);
- vpid_sync_vcpu_single(vmx->nested.vpid02);
- }
- }
-}
-
static inline void decache_tsc_multiplier(struct vcpu_vmx *vmx)
{
vmx->current_tsc_ratio = vmx->vcpu.arch.tsc_scaling_ratio;
--
2.24.1
next prev parent reply other threads:[~2020-03-20 21:31 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 21:27 [PATCH v3 00/37] KVM: x86: TLB flushing fixes and enhancements Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 01/37] KVM: VMX: Flush all EPTP/VPID contexts on remote TLB flush Sean Christopherson
2021-08-03 1:45 ` Lai Jiangshan
2021-08-03 15:39 ` Sean Christopherson
2021-08-04 3:11 ` Lai Jiangshan
2021-08-04 15:33 ` Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 02/37] KVM: nVMX: Validate the EPTP when emulating INVEPT(EXTENT_CONTEXT) Sean Christopherson
2020-03-23 14:51 ` Vitaly Kuznetsov
2020-03-23 15:45 ` Sean Christopherson
2020-03-23 23:46 ` Paolo Bonzini
2020-03-20 21:27 ` [PATCH v3 03/37] KVM: nVMX: Invalidate all EPTP contexts when emulating INVEPT for L1 Sean Christopherson
2020-03-23 15:24 ` Vitaly Kuznetsov
2020-03-23 15:53 ` Sean Christopherson
2020-03-23 16:24 ` Jim Mattson
2020-03-23 16:28 ` Sean Christopherson
2020-03-23 16:36 ` Jim Mattson
2020-03-23 16:44 ` Sean Christopherson
2020-03-23 23:50 ` Paolo Bonzini
2020-03-24 0:12 ` Jim Mattson
2020-03-30 18:38 ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 04/37] KVM: nVMX: Invalidate all roots when emulating INVVPID without EPT Sean Christopherson
2020-03-23 15:34 ` Vitaly Kuznetsov
2020-03-23 16:04 ` Sean Christopherson
2020-03-23 16:33 ` Vitaly Kuznetsov
2020-03-23 16:50 ` Sean Christopherson
2020-03-23 16:57 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 05/37] KVM: x86: Export kvm_propagate_fault() (as kvm_inject_emulated_page_fault) Sean Christopherson
2020-03-23 15:47 ` Vitaly Kuznetsov
2020-03-23 16:24 ` Sean Christopherson
2020-03-23 23:56 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 06/37] KVM: x86: Consolidate logic for injecting page faults to L1 Sean Christopherson
2020-03-24 0:47 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 07/37] KVM: x86: Sync SPTEs when injecting page/EPT fault into L1 Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 08/37] KVM: VMX: Skip global INVVPID fallback if vpid==0 in vpid_sync_context() Sean Christopherson
2020-03-25 9:33 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 09/37] KVM: VMX: Use vpid_sync_context() directly when possible Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 10/37] KVM: VMX: Move vpid_sync_vcpu_addr() down a few lines Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 11/37] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 12/37] KVM: VMX: Drop redundant capability checks in low level INVVPID helpers Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 13/37] KVM: nVMX: Use vpid_sync_vcpu_addr() to emulate INVVPID with address Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 14/37] KVM: x86: Move "flush guest's TLB" logic to separate kvm_x86_ops hook Sean Christopherson
2020-03-25 10:23 ` Vitaly Kuznetsov
2020-03-25 15:41 ` Paolo Bonzini
2020-03-25 16:08 ` Vitaly Kuznetsov
2020-03-25 15:48 ` Sean Christopherson
2020-03-25 16:11 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 15/37] KVM: VMX: Clean up vmx_flush_tlb_gva() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 16/37] KVM: x86: Drop @invalidate_gpa param from kvm_x86_ops' tlb_flush() Sean Christopherson
2020-03-25 11:23 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 17/37] KVM: SVM: Wire up ->tlb_flush_guest() directly to svm_flush_tlb() Sean Christopherson
2020-03-25 11:23 ` Vitaly Kuznetsov
2020-03-20 21:28 ` Sean Christopherson [this message]
2020-03-25 11:25 ` [PATCH v3 18/37] KVM: VMX: Move vmx_flush_tlb() to vmx.c Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 19/37] KVM: nVMX: Move nested_get_vpid02() to vmx/nested.h Sean Christopherson
2020-03-25 11:25 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 20/37] KVM: VMX: Introduce vmx_flush_tlb_current() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 21/37] KVM: SVM: Document the ASID logic in svm_flush_tlb() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 22/37] KVM: x86: Rename ->tlb_flush() to ->tlb_flush_all() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 23/37] KVM: nVMX: Add helper to handle TLB flushes on nested VM-Enter/VM-Exit Sean Christopherson
2021-10-28 13:11 ` Lai Jiangshan
2021-10-28 15:22 ` Sean Christopherson
2021-10-29 0:44 ` Lai Jiangshan
2021-10-29 17:10 ` Sean Christopherson
2021-10-30 1:34 ` Lai Jiangshan
2021-11-04 17:47 ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 24/37] KVM: x86: Introduce KVM_REQ_TLB_FLUSH_CURRENT to flush current ASID Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 25/37] KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 26/37] KVM: nVMX: Selectively use TLB_FLUSH_CURRENT for nested VM-Enter/VM-Exit Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 27/37] KVM: nVMX: Reload APIC access page on nested VM-Exit only if necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 28/37] KVM: VMX: Retrieve APIC access page HPA only when necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 29/37] KVM: VMX: Don't reload APIC access page if its control is disabled Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 30/37] KVM: x86/mmu: Move fast_cr3_switch() side effects to __kvm_mmu_new_cr3() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 31/37] KVM: x86/mmu: Add separate override for MMU sync during fast CR3 switch Sean Christopherson
2020-03-24 11:07 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 32/37] KVM: x86/mmu: Add module param to force TLB flush on root reuse Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 33/37] KVM: nVMX: Skip MMU sync on nested VMX transition when possible Sean Christopherson
2020-03-24 11:19 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 34/37] KVM: nVMX: Don't flush TLB on nested VMX transition Sean Christopherson
2020-03-24 11:20 ` Paolo Bonzini
2020-03-24 18:10 ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 35/37] KVM: nVMX: Free only the affected contexts when emulating INVEPT Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 36/37] KVM: x86: Replace "cr3" with "pgd" in "new cr3/pgd" related code Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 37/37] KVM: VMX: Clean cr3/pgd handling in vmx_load_mmu_pgd() Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200320212833.3507-19-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=bgardon@google.com \
--cc=boris.ostrovsky@oracle.com \
--cc=jmattson@google.com \
--cc=john.haxby@oracle.com \
--cc=joro@8bytes.org \
--cc=junaids@google.com \
--cc=kvm@vger.kernel.org \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=liran.alon@oracle.com \
--cc=pbonzini@redhat.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).